Improvement of abrasive water jet machining accuracy for titanium and TiNb alloy

The International Journal of Advanced Manufacturing Technology - The paper is dealing with abrasive water jet (AWJ) cutting of titanium and titanium–niobium alloy. It contains comparison of...     

Experimental and Numerical Investigation on Hydraulic Performance of Slit-check Dams in Subcritical Flow Condition

Water Resources Management - Slit-check dams have a flow regulation function under normal flow conditions as well as holding large solid (debris flow control). However, the effects of such...     

Eco-Friendly Natural Clay: Montmorillonite Modified with Nickel or Ruthenium as an Effective Catalyst in Gamma-Valerolactone Synthesis

Catalysis Letters - Ni/Ru metals supported on cheap and available support montmorillonite K10 were used for the selective hydrogenation of levulinic acid to γ-valerolactone. Different loadings...     

A new Schiff base: Synthesis,characterization and optimization of metal ions-binding properties

In this study, a new Schiff base (H₄TSTE) was synthesized and characterized by elemental analysis, FT-IR, NMR and MS spectral data. Liquid–liquid extraction process was performed for removal of Cu(II), Mn(II), Ni(II), Pb(II) and Zn(II) from aqueous solutions by means of H₄TSTE. The extractions were investigated depending on the concentration of picric acid, metal ion and H₄TSTE ligand. Response surface methodology (RSM) was first applied to optimize metal ion-binding properties of H₄TSTE. The extraction efficiency was estimated to be >98% for all metals by models. Under the same conditions, the extraction efficiency was experimentally found to be >97% with a relative standard deviation within ±0.10 (N = 4), indicating the suitability of the models.     

Hydrogenation of phenylacetylene and 3-phenylpropyne using Rh(diene) complexes under homogeneous and heterogeneous conditions

Hydrogenation of phenylacetylene (PA) and 3-phenylpropyne (PP) was carried out using [Rh(diene)Cl]₂ complexes (diene is hexadiene (HD), cycloocta-1,5-diene (COD), norborna-2,5-diene (NBD)) in their immobilized forms and compared with hydrogenation in homogeneous arrangement. Immobilization brings significant increase of the catalytic activity and product selectivity in the step-wise hydrogenation to corresponding vinyl-resp. allyl-benzenes. Diene-ligand effect was apparent in PA hydrogenation; the product selectivity decreased in order Rh(HD) > Rh(NBD) > Rh(COD) and catalytic activity decreased in order Rh(HD) > Rh(COD) > Rh(NBD).     

Superparamagnetic latex synthesized by a new route of emulsifier‐free emulsion polymerization

The aim of this study was to design polymeric nanospheres containing magnetic nanoparticle which could display superparamagnetic behavior and thus find application in allied fields. First magnetite nanoparticles were synthesized with coprecipitation method and then their stable acidic dispersion was prepared without surfactant and dropped into the polymerization system during a certain time interval after the polymerization started. The effects of time at which the magnetic sol was added into polymerization system on latex size and stability, average molecular weight of polymer were examined in the case of two different monomer concentrations. Extensive characterization by transmission electron microscopy, dynamic light scattering, thermal gravimetric analysis and magnetic measurements shows that when the magnetic sol was dropped during earlier time of polymerization at stage 1, the latex size, average molecular weight of polymer, thermal stability of polymeric composite, and saturation magnetization reduced, whereas polydispersity of size and molecular weight increased because of the reaction between persulfate and naked surface of magnetite at the aqueous phase. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of La0.8Sr0.2Ga0.83Mg0.17O3 electrolyte by polyol method for solid oxide fuel cells

Perovskite type La_0.8Sr_0.2Ga_0.83Mg_0.17O₃ powders were prepared via simple polyol method for the first time in literature. Obtained material was characterized by using XRD, SEM, Impedance Spectroscopy and density measurements. Pure LSGM powders were achieved after heat treatment at 1100 °C for 12 h. 87% relative density was obtained after pressing of these powders under 1 MPa and sintering at 1250 °C for 12 h. Average particle size was calculated as 1.77–2.4 μm from SEM micrographs. Overall conductivity of the LSGM pellet was found to be 0.0014 S/cm at 850 °C with impedance analysis and showed that the preparation process needs improvements.     

Measurement of Specific Fracture Energy and Surface Tension of Brittle Materials in Powder Form

Studies of the influence of specimen geometry and size–effect on the K _R –curves and the related fracture parameters were carried out by the authors (Kumar and Barai 2008b). The present paper is a supplementary contribution and reports interesting results related to the effect of the loading condition and size–effect studies on the K _R –curves associated with the cohesive stress distribution for complete fracture process, the double–K fracture parameters, the CTOD–curves and the process zone length using two different loading conditions (i.e., three–point bending test and four–point bending test). The laboratory size specimen with initial–notch length/depth ratios 0.3 and 0.5 are considered in the work. The load–crack opening displacement curves for these loading conditions are obtained using well known version of fictitious crack model.