The importance of access to information and knowledge coordination on quality and economic benefits obtained from Six Sigma

Wireless Networks - This paper presents a structural equation model that relates knowledge coordination with access to information in the process of implementing Six Sigma and their impact on the...     

Nucleation behavior of blended high‐melting fractions of milk fat as affected by emulsifiers

The effect of highly hydrophobic emulsifiers, the palmitic sucrose ester P‐170 (hydrophilic/lipophilic balance (HLB) = 1.0), the stearic sucrose ester S‐170 (HLB = 1.0), the polyglycerol ester decaglycerol decastearate DAS 7S (HLB = 3.7) and the polyglycerol ester decaglycerol dodecabehenate DDB 750 (HLB = 2.6), on the nucleation of a high melting point milk fat fraction (HMF) and its blends with sunflower oil (SFO) was investigated by polarized laser light turbidimetry, X‐ray diffractometry and polarized light microscopy (PLM). Addition of polyglycerol esters accelerated nucleation, giving shorter induction times for the same supercooling. On the contrary, sucrose esters inhibited nucleation since induction times were elongated in all conditions selected. Addition of emulsifiers modified the polymorphic behavior in the blends with SFO. The β' form was promoted especially with the addition of S‐170. DAS 7S and DDB 750 promoted crystallization. PLM images showed many small crystals that did not appear in HMF images. Addition of P‐170 and S‐170 delayed nucleation and inhibited crystal growth. Crystals were notoriously smaller than the ones that appeared in HMF images. The Fisher–Turnbull model was used to calculate activation free energies of nucleation. In all cases, sucrose esters elevated the energy barrier for nucleation. Polyglycerol esters, however, if they had an effect on the energy barrier, lowered the values.     

Porosity‐dependent properties of Nb‐doped Pb(Zr,Ti)O3 ceramics

In the present work, it is shown how the controlled porosity can be exploited to obtain a compromise between a reduced permittivity down to a few hundreds and maintaining a high tunability level as in the dense material, to fulfill requirements for tunable applications. Nb‐doped Pb(Zr,Ti)O₃ ceramics with porosity in the range 5%‐30% have been prepared by direct sintering method. X‐ray diffraction analysis and Rietveld refinement indicated a co‐existence of tetragonal and monoclinic phases in the porous ceramics. Dielectric properties revealed a gradual reduction in permittivity when increasing the porosity level, while maintaining low dielectric losses below 3%. The ferroelectric switching behavior is also influenced by the porosity level: a continuous reduction in the saturation and remnant polarization is observed with increasing porosity. The nonlinear dielectric properties of all the investigated ceramics preserve a high level of tunability in comparison with one of the dense material, irrespective of the porosity level, while zero field permittivity was decreased below 1000. An optimum behavior is found for the ceramic sample with 25% porosity, which shows a high tunability, smaller losses, and moderate dielectric constant (ε ~600).     

Preservative Effect of a Previous High-Pressure Treatment on the Chemical Changes Related to Quality Loss in Frozen Hake (<Emphasis Type="Italic">Merluccius merluccius</Emphasis>)

The objective of this study was the quality loss inhibition of hake (Merluccius merluccius) during the frozen storage. For it, the effect of a previous high-pressure (HP) treatment (150–450 MPa for 2 min) was analysed throughout a 5-month storage at ? 10 °C. Quality changes were monitored by complementary chemical analyses. Inhibition (p < 0.05) of dimethylamine (DMA), free fatty acid (FFA), formaldehyde (FA), trimethylamine, total volatile amine and fluorescent compound (tertiary lipid oxidation compound) formation was concluded by previous pressure treatment according to the one-way ANOVA analysis. On the contrary, no effect (p > 0.05) on the K value, polyene index and formation of peroxides and thiobarbituric acid reactive substances was achieved. Additionally, a multifactor ANOVA test (pressure and frozen storage time effects; i.e. comparison among HP treatments) showed an inhibitory effect (p < 0.015) on DMA and FFA formation, this effect increasing with pressure level applied. This inhibitory effect on the formation of such molecules related to quality loss can be explained on the basis of the damage caused to different kinds of enzymes such as trimethylamine oxide demethylase, lipases and phospholipases, so that their activity during the subsequent frozen storage would decrease. The work here presented provides for the first time information concerning the employment of HP technology to inhibit the DMA, FA and FFA formation during the frozen storage of hake. Further research focussed on commercial frozen conditions (? 18 °C) and including sensory and nutritional aspects is foreseen.     

Subjective perception of safety in healthy individuals working with 7 T MRI scanners: a retrospective multicenter survey

Objective

To retrospectively assess perception of safety of healthy individuals working with human 7 Tesla (T) magnetic resonance imaging (MRI) scanners.

Materials and methods

A total of 66 healthy individuals with a mean age of 31 ± 7 years participated in this retrospective multicentre survey study. Nonparametric correlation analysis was conducted to evaluate the relation between self-reported perception of safety and prevalence of sensory effects while working with 7 T MRI scanners for an average 47 months.

Results

The results indicated that 98.5 % of the study participants had a neutral or positive feeling about safety aspects at 7 T MRI scanners. 45.5 % reported that they feel very safe and none of the participants stated that they feel moderately or very unsafe while working with 7 T MRI scanners. Perception of safety was not affected by the number of hours per week spent in the vicinity of the 7 T MRI scanner or the duration of experience with 7 T MRI. More than 50 % of individuals experienced vertigo and metallic taste while working with 7 T MRI scanners. However, participants’ perceptions of safety were not affected by the prevalence of MR-related symptoms.

Conclusions

The overall data indicated an average perception of a moderately safe work environment. To our knowledge, this study delineates the first attempt to assess the subjective safety perception among 7 T MRI workers and suggests further investigations are indicated.

     

Shall we dance? How a multicopper oxidase chooses its electron transfer partner

Multicopper oxidases (MCOs) are encoded in the genomes of Eukarya, Bacteria, and Archea. These proteins are unique in that they contain at least four Cu atom prosthetic groups organized into one each of the three spectral classifications of copper sites in biology: type 1 (T1), type 2 (T2), and binuclear type 3 (T3), where the T2 and T3 sites form a trinuclear Cu cluster. With these four redox-active copper sites, the multicopper oxidases catalyze the four-electron (4e(-)) reduction of dioxygen to 2H2O, an activity that they alone share with the terminal heme-containing oxidases. Most MCOs exhibit broad specificity towards organic reductants, while a relatively small number of family members exhibit equally robust activity towards metal ions like Fe(II), Cu(I), and Mn(II) and, thus, are considered metallo-oxidases. This Account analyzes the structure-activity features of multicopper oxidases that determine their relative substrate specificity. Since the substrate oxidation step involves an outer-sphere electron transfer from the reductant to the T1Cu site in the protein, the concepts of Marcus theory are applied to unravel the origin of the substrate specificity of the multicopper ferroxidases.     

Beam-Column Design Equations for Wide-Flange Pultruded Structural Shapes

A simple procedure is developed for the selection of pultruded structural shapes to be used as beam-columns in structural design. The design equations are then validated by comparison with experimental data gathered during beam-column testing of wide-flange and I-beam pultruded structural shapes. The design procedure accounts for axial load eccentricity and bending action induced by lateral loads and end-moments. The design equations are set in the context of load and resistance factor design, considering both strength and serviceability. This paper addresses the methodology to determine the resistance factors, which should be used with properly selected load-factors accounting for the variability and uncertainty of the loads. The design equations use section-properties, such as the bending stiffness (EI), which must be measured and supplied by industry. It is found that the section-properties used in the design of beams and columns are sufficient for the design of beam-columns. Therefore, the cost and time involved in testing structural shapes are minimized. This paper also addresses the means by which section-properties can be generated effectively and inexpensively.