Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

Activity of NiO in (Ni,Mg)O Solid Solutions

Disagreement exists in the literature concerting the activity of NiO in (Ni,Mg)O solid solutions. Ideal behavior, as well as strong positive deviations and strong negative deviations from ideality, has been reported. In the present study, the activity of NiO was determined by electromotive force measurements using the solid-state cell Pt/Ni-NiO/0.92ZrO₂-0.08Y₂O₃/Ni-(Ni,Mg)O/Pt. The compositions studied had NiO mole fractions of 0.1,0.3,0.5,0.7, and 0.9. In agreement with theoretical expectations, the solid solutions exhibited ideal behavior at 882° and 982°C. Possible reasons for the conflicting results in the literature arc presented.     

Design aspects of planar and conventional SMPS transformer: a cost benefit analysis

The intent of this paper is to design a high-frequency transformer that is to be incorporated into the DC/DC pulsewidth-modulated switch-mode power supplies by two different technical approaches: a conventional wound-coil magnetic using copper wires, and a planar magnetic with layered copper tracks on laminated printed circuit board. Comparisons will be made between the two approaches in terms of profile: mounting height and surface area, and performance: power losses and efficiency. Other indicators like temperature rise and leakage inductance that causes electromagnetic interference, and cost, materials, and process fluency are also to be looked into. A sandwiched configuration for primary and secondary windings is proposed for the planar type. Issues arising and typical phenomena encountered will be discussed in detail. Primarily, the dominating factor in performance, cost effectiveness, or circuit compactness that restrains the choice of a particular type is to be evaluated.     

On‐Line Detection Of State‐Of‐Charge In Lead Acid Battery Using Radial Basis Function Neural Network

To realize a stable supply of electric power in an automobile, an accurate and reliable detection method of SOC (state‐of‐charge) in a lead acid battery is required. However the dynamics of the battery is very complicated. The characteristics of the battery greatly change due to its degradation. Moreover a automobile has many driving patterns, which are unknown beforehand. Thus it is not easy to detect the SOC analytically. In this paper, to overcome this problem, a new on‐line SOC detection method with a radial basis function neural network is proposed. In order to increase the detection accuracy of degraded batteries, physical values related to the degradation degree are used as input signal in the neural network. The detection accuracies for different sized batteries and various degradation states are investigated.     

Security of the Cao-Li public key cryptosystem

The author shows that the Cao-Li cryptosystem proposed [1991] is not secure. Its private key can be reconstructed from its public key using elementary means such as LU-decomposition and the Euclidean algorithm     

Process integration in CASE environments

Research in CASE environments has focused on two kinds of integration: tool and object. A higher level of integration, process integration, which represents development activities explicitly in a software process model to guide and coordinate development and to integrate tools and objects, is proposed. Process integration uses software process models (SPMs) a process driver, a tool set, and interfaces for both developers and managers to form the backbone of a process-driven CASE environment. The developer's interface, a working environment that lets developers enact an SPM, and the manager's interface which gives managers and analysts the tools to define, monitor, and control the SPMs that developers are working on concurrently are discussed. The Softman environment experiment, an implementation of process-driven CASE environments with existing CASE environments, is reviewed     

Droplet de-entrainment by inertial impaction on vertical rods in an air-droplet mixture flow

We experimentally investigate the de-entrainment of droplets by inertial impaction on an array of vertical rods in an air-droplet mixture flow. The de-entrainment efficiencies are measured for a single rod, for a single row of rods, and for a multi-row of rods. We investigate the effects of the droplet mass flux (0.5–5.4 kg/m² s), the droplet Weber number (3000–8000), the air velocity (0–6 m/s), the rod geometry, and the surface roughness on the de-entrainment, and the rod diameter-to-pitch ratio effect on the de-entrainment. The results for a single rod show that the de-entrainment efficiency decreases slightly as the droplet mass flux increases; however, in our experimental ranges, there is negligible dependence on the droplet Weber number, the air velocity, and the surface roughness. The rod geometry affects the de-entrainment efficiency. The results for a single row of rods show that the existence of neighboring rods promotes de-entrainment due to droplet splashing, and we develop a correlation to show the effect of diameter-to-pitch ratio on the de-entrainment. Using information on the de-entrainment efficiencies of a single rod and those of a single row of rods, we propose a correlation that predicts the de-entrainment efficiency for a multi-row of rods with a staggered array. The RMS errors of the correlation from the de-entrainment efficiencies experimentally obtained are within 13.5%.     

草酸二异辛酯的合成

以酸化膨润土(SO42-/Bentonite)固体酸为催化剂、草酸和异辛醇为原料合成草酸二异辛酯。考察了焙烧温度对催化剂活性的影响。结果表明,焙烧温度为500℃时催化剂活性最好。考察了反应温度、原料配比、催化剂用量和反应时间等因素对酯化反应的影响,确定了最佳酯化反应工艺条件,即n(异辛醇)∶n(草酸)为3.5∶1、w(SO42-/Bentonite)为2.0%、反应温度140℃、反应时间3 h;在该条件下草酸的转化率达到96.4%。催化剂重复使用6次后,草酸的转化率仍可达到94.4%。     

Long-term effect of inducible silent ischaemia on left ventricular systolic function

A new method of thin section preparation of III-V semiconductors and multilayers for transmission electron microscopy (TEM) is presented that exhibits considerable advantages over conventional methods such as ion beam milling and jet thinning. GaAs thin films and multilayers of GaAs/In chi Ga1-chi As/GaAs are grown over an etch release layer of AlAs on GaAs substrates by molecular beam epitaxy (MBE). Planar TEM sections prepared by selective etching from these samples show improved ability to image film morphology and dislocation arrangements, and the resulting large thin electron transparent areas facilitate dislocation density measurements and detection of spatial variations. Avoidance of radiation effects and wedge shaping, both common to ion milled samples, allows this method to be used to prepare uniform thickness standards of single layer GaAs films for EDS analysis or lattice imaging.