锝化学研究 Ⅸ.脑显像剂Tc~(Ⅴ)ON_2S_2类配合物结构稳定性和价态的研究

采用改进的ＣＮＤＯ／２法模拟了ＢＡＴ类脑显像剂Ｔｃ（Ⅴ）Ｏ配合物价态的转换过程，发现Ｎ２Ｓ２类配体与Ｔｃ（Ⅴ）Ｏ核配位时，可能存在配位平衡离子Ｘ。在溶液中由于Ｘ离子的优先解络，瞬间存在＋１价对称性９９Ｔｃｍ配合物，并且，它又自动向相对稳定的０价不对称性９９Ｔｃｍ配合物转换，在动态转换过程中，将导致仅有一个配位Ｎ原子保留一个质子，这与实验结果一致。采用键级削弱百分数概念，表征配位过程的二个配位Ｎ原子上保留程度，解释了Ｔｃ（Ⅴ）Ｏ核、Ｔｃ（Ⅴ）≡Ｎ核Ｎ２Ｓ２类配合物两个Ｎ－Ｈ键上质子保留程度不同的原因，为今后设计不同价态锝配合物结构提供理论依据。     

Variations of physical properties in pellets containing alumina/carbon powder mixtures during reduction and nitridation

Surface area and porosity of pellets containing alumina/carbon powder mixtures during reduction and nitridation were determined. The experimental results indicated that surface area and porosity of solid samples were decreased by increasing the reaction temperature, grain size, forming pressure and the amount of catalyst. Increasing the molar ratio of C/Al₂O₃ and gas flow rate could decrease the surface area and increase the porosity of the solid sample.     

粗苯放散气体回收系统的开工调试经验

介绍了焦化厂粗苯放散气体回收系统开工调试的经验。     

Thermal conductivities of powder-filled epoxy resins

Effective thermal conductivities of powder-filled epoxy composites were experimentally obtained using a transient method. Fillers used were aluminum and cupric oxide. Comparisons of these data with published correlations indicate that Agari's model can give better fits. Nielsen's model may also give a good prediction of the shape of particles can be determined and values of parameters A and ?m are available. An alternative method of dealing with parameter C₂ in Agari's model is suggested. © 1993 John Wiley & Sons, Inc.     

Free vibration of laminated plates using a finite strip method based on a higher-order plate theory

The finite strip method based on the higher-order plate theory is developed for determining the natural frequencies of laminated plates. This method can accurately predict the through thickness effect of transverse shear deformation. Furthermore, only a few degress of freedom are required in the finite strip method. Some numerical results for various span-to-thickness ratios, material properties and stack sequences are presented for illustrative purposes. The present model provides a better way to obtain more accurate natural frequency results.     

A new process of fabricating inverted-staggered tri-layer thin-filmtransistors

A new method of fabricating a-Si:H TFT with etching-stop structure has been proposed. Only one plasma-enhanced chemical vapor deposition is required in this new method and a PH₃/H₂ plasma treatment during the deposition has been used to form the TFT contact and thus saved another plasma deposition. With this method, a TFT of 500 Å active layer has been fabricated successfully. The drain current and saturation mobility of this device is 2.4×10^-7 A and 0.1 cm²/V sec, respectively, which is comparable to the conventional fabricating method. The plasma treatment will also form an additional leakage path on the TFT top surface and increase the TFT subthreshold slope. However, a current of less than 1 pA at V_G=-2.4 V can still be obtained. The possible mechanism of the contact formation by the plasma treatment is also discussed     

10MeV中子引起的~（238）U，~（209）Bi，Fe和~9Be的次级中子

１０ＭｅＶ中子引起的￣（２３８）Ｕ，￣（２０９）Ｂｉ，Ｆｅ和￣９Ｂｅ的次级中子双微分截面测量祁步嘉，唐洪庆，周祖英，周陈维，沈冠仁，柯尊建，孙振强，夏海鸿（中国原子能科学研究院核物理所，北京２７５－４６信箱，１０２４１３）次级中子双微分截面是核工程设...     

Robust controller with disturbance rejection for hydraulic servosystems

A controller is presented that improves the performance and reduces the sensitivity of hydraulic servo systems in the presence of parameter variations, nonlinear effects, and other disturbances. The control system has enhanced closed-loop stability and can recover from steady-state and transient error quickly and completely. It consists of a servo controller, an auxiliary controller, and a robust controller. Simulation and experimental results demonstrate the validity of the controller