Scattering center parameterization of wide-angle backscattered datausing adaptive Gaussian representation

We present a scattering center extraction algorithm to parameterize the backscattered data from complex targets collected over large angular apertures. This parameterization is based on a scattering center model of the target, but includes an aspect-dependent amplitude function for each scattering center. A two-dimensional (2-D) adaptive Gaussian representation (AGR) algorithm is used to extract the position and the amplitude function associated with each scattering center. The algorithm is tested with data generated by the Xpatch radar simulation code as well as chamber measurement data. The results show that a very good compression ratio can be achieved, resulting in a compact scattering center model of the target. Once such model is available, we can easily reconstruct range profiles and ISAR images at any aspect on the same plane with good accuracy     

Pattern analysis of airborne dipole antenna in high-frequency region

The Uniform Geometrical Theory of Diffraction (UTD) has been successfully used in pattern analysis of airborne dipole antenna on the A-5 fighter in high-frequency region. In the analysis, several canonical problems are investigated first, then the complicated problem is calculated with compiling these canonical problems. The numerical results are compared with the experimental data, and good agreement has been seen. The effectiveness and practicality of the present analysis are thus verified.     

Modelling and Simulation of Batch and Continuous Fluidized Bed Dryers

The performance of batch and continuous fluidized solids dryers has been modeled, with allowance for diffusional moisture transport in the dense phase particles and for interstitial gas-to-particle mass transfer within the dense phase, as well as for interphase exchange resistance between gas bubbles and the dense phase. Two types of boundary conditions are employed. Variations of the bed temperature and product moisture content in the bed with time are predicted numerically under various batch drying conditions. Exit product moisture contents, bed temperatures and outlet air humidities are also predicted for continuous drying at various mean residence times. The model can be used for homogeneous as well as bubbling fluidized bed drying. It can be used for a wide range of materials, including cereal grains and granular synthetic polymeric materials.     

广义de Bruijn多计算机互连网络

（ｄ，ｍ）ｄｅ Ｂｒｕｉｊｎ多计算机系统互连网络限制网络的规模必须为ｄ＾ｍ。本文把（ｄ，ｍ）ｄｅ Ｂｒｕｉｊｎ网络推广到了任意顶点情形，提出了广义ｄｅ Ｂｒｕｉｊｎ网络，研究了广义ｄｅ Ｂｒｕｉｊｎ网络的自路由性质，设计了路由算法，研究了广义ｄｅ Ｂｒｕｉｊｎ网络顶点度的性质和容错特性。     

层次式级联多网络模型及其性能

本文提出了一种层次式级联多网络结构，论述了其训练算法，并验证了该结构的收敛性。这种结构在处理高阶非线性分布数据的分类问题方面具有优良的性能，用北京谱仪事例过滤进行性能测试结果表明，其训练和泛化性能都优于单个ＢＰ网络。     

基于逻辑器件的可编程增益放大器设计

本文介绍了可编程增益放大器设计的方法。它主要由控制电路、放大电路、显示电路三大模块组成。该系统性能好、成本低、工作可靠,具有一定的工程应用价值,经测试表明,该设计基本上达到了设计的要求。     

电位滴定法研究~(99)Tc-HMDP和~(99)Tc-HEDP中Tc的氧化态

~(99)Tc-HMDP和~(99)Tc-HEDP溶液是在相应的螫合剂存在下,用过量SnCl_2还原~(99)TcO_4-制得。用标准I_2液对SnCl_2进行了剩余量电位滴定,确定了在pH～3的介质中,~(99)Tc-HMDP和~(99)Tc-HE-DP中~(99)Tc的氧化态均为+4。全部实验在N_2气流中进行。~(99)Tc-HMDP和~(99)Tc-HEDP的紫外光谱表明:在用I_2滴定的过程中,~(99)Tc只处于一种氧化态+4;将它们放置在空气中,一小时后仍较稳定。     

经食道心房调搏的放射性核素心血管造影

本文应用反符合电路剔除调搏脉冲干扰的方法,制成经食道心房调搏心电心音门电路触发装置,用于经食道心房调搏的核素心血管造影。参考Tzivoni标准,当逐级增加调搏心率至140次/min或亚极量心率后发现:冠心病人有调搏后EF降低;急性心肌梗塞病人EF减低更为明显,并呈室壁反向运动。因此,心房调搏核素心血管造影有助于冠心病,特别是心肌梗塞的诊断。     

焊接设备中计算机控制系统的抗干扰

本文分析提出焊接设备中影响计算机控制系统的几种主要干扰。结合实际工作,提出了解决的措施和方法。     

Site occupations and ordering behaviour of O phase in Ti2AlNb—based intermetallics

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｏｒｔｈｏｒｈｏｍｂｉｃａｌｌｏｙｓａｒｅｏｆｇｒｅａｔｔｅｃｈ ｎｏｌｏｇ ｉｃａｌｉｎｔｅｒｅｓｔｉｎｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎｓｓｉｎｃｅｔｈｅｙｈａｖｅａｇｏｏｄｂａｌａｎｃｅａｍｏｎｇｓｔ