攀钢含铁尘泥的利用现状及发展方向

简述了攀钢含铁尘泥的基本特性、攀钢含铁尘泥利用技术现状及存在的问题。根据目前国内外钢铁企业含铁尘泥综合利用技术的动态、经验，并结合攀钢的实际情况，提出了攀钢含铁尘泥利用技术的发展方向。     

城市化进程中的小城镇交通初探

通过对小城镇城市结构、路网结构、交通结构和交通管理特征进行详细分析，得出小城镇交通问题症结所在，并初步提出小城镇交通规划和交通治理的对策。     

低温等离子体对血管内金属支架的表面改性

生物材料用于人体必须要具备生物相容性。尤其是与血液相接触的材料如血管内支架必须要具备血液相容性。材料的表面特性直接影响血液系统中是否会出现血栓。本文针对金属血管内支架的表面特性、与血液的界面反应以及用于提高血液相容性的低温等离子表面改性进行了简要综述     

离心式高炉鼓风机扩压叶片断裂事故分析及处理

通过高炉鼓风机扩压叶片断裂事故，从化学分析、物理检验，结合使用情况对扩压叶片断裂原因进行了详细分析，并提出了改进措施。     

PRO——一种新的地震资料处理方法

PRO(影像的参数展开)技术是由俄罗斯地球物理学家开发的一种崭新的地震资料处理技术。本文从PRO基本原理入手,简单介绍了PRO的速度分析原理。PRO速度分析和成像均以信号的椭圆展开和参数展开为基础,其中参数展开方法考虑波型转换、介质的横向不均匀造成传播速度的变化。该技术抛开了传统共中心点叠加的思想,从根本上解决了以CMP方法为基础的传统地震处理技术遇到的困难。通过模型与实例分析对比,PRO比传统CMP方法更优越。     

支持下一代无线宽带应用自适应QoS模型的研究

作为真正完整的下一代网络 ( NGN,Next Generation Network)解决方案 ,NGN需要在固定通信领域和移动通信领域都能够支持综合多媒体特性。NGN中的新一代移动通信网承载在开放式、层次化结构的分组交换网络之上 ,能够为用户提供端到端的 Qo S解决方案。本文分析了下一代移动通信系统中多媒体宽带应用的 Qo S问题 ,从无线通信系统的多层次结构出发 ,建立了业务流的 Qo S指标评判体系 ,为下一代网络中的无线宽带应用提供了一种自适应Qo S控制模型     

中国药典2005年版二部与2000年版收载眼科用药的对比

对比中国药典2005年版二部与2000年版二部中有关眼科用药方面的内容,简要归纳新增或未收载的品种与修改的内容。     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Decreasing miscibility with greater heterogeneity in ternary polymer blend: poly(cyclohexyl methacrylate), poly(α‐methyl styrene) and poly(4‐methyl styrene)

A ternary blend system comprising poly(cyclohexyl methacrylate) (PCHMA), poly(α‐methyl styrene) (PαMS) and poly(4‐methyl styrene) (P4MS) was investigated by thermal analysis, optical and scanning electron microscopy. Ternary phase behaviour was compared with the behaviour for the three constituent binary pairs. This study showed that the ternary blends of PCHMA/PαMS/P4MS in most compositions were miscible, with an apparent glass transition temperature (T_g) and distinct cloud‐point transitions, which were located at lower temperatures than their binary counterparts. However, in a closed‐loop range of compositions roughly near the centre of the triangular phase diagram, some ternary blends displayed phase separation with heterogeneity domains of about 1 µm. Therefore, it is properly concluded that ternary PCHMA/PαMS/P4M is partially miscible with a small closed‐loop immisciblity range, even though all the constituent binary pairs are fully miscible. Thermodynamic backgrounds leading to decreased miscibility and greater heterogeneity in a ternary polymer system in comparison with the binary counterparts are discussed. © 2003 Society of Chemical Industry