一种高效的电子政务系统的设计与应用

计算机网络技术的出现,全球信息化改变着人们的生活方式,世界各国高度重视发展电子政务,它是一个国家及城市竞争力水平的标志之一.在这样严峻的社会形势下,建立一个高效的电子政务系统是十分必要的.首先,分析了建立电子政务系统的必要性、特点、功能;然后,提出了电子政务系统的体系模型,设计出了功能结构图和网络结构图,详细地描述了方案思路;最后,把此模型应用到商洛市旅游行业中,经过调查数据研究分析,政务系统的出现给旅游业带来巨大的变化,整个城市的经济、影响力大幅度上升.     

微信加密通信原理分析简

基于移动客户端的保密通信原理,本文讨论了现阶段主流社交软件微信系统的通信方式和加密原理,其基于RSA加密、随机AES私钥的加密方式设计是通信保密的关键核心,也是目前绝大部分移动端社交软件的主流加密方式。     

Mathematical model of shear rate of polymer melt dynamic extruding through capillary

With superimposing a sine vibration of displacement on the extruding direction of a polymer melt, the characterization formula of the shear rate of a polymer melt within a capillary was set up. By making use of the experimental equipment of a constant velocity type dynamic rheometer of capillary (CVDRC) designed by the authors, the calculating steps of the shear rate of the polymer melt at the wall of the capillary under a vibration force field were established. Through measuring and analyzing the instantaneous data of capillary entry pressure, capillary volume rate, and their phase‐difference under the superimposed vibration, the polymer melt's shear rate at the wall of the capillary can thus be calculated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1056–1061, 2005     

FGTO — A fine structured GTO-thyristor with improved switching characteristics

Contents A fine structured GTO thyristor, abbreviated FGTO, has been developed to improve the switching characteristics. The new device has a cathode finger width of only 20 m and can be turned off without a negative gate bias at an anode current level of more than 200 A/cm². The turn-off time can be shortened down tot _off 500 ns by increasing the negative gate current. A snubber circuit is not necessary to turn off the FGTO's. The maximum rate of rise of anode voltage du/dl reaches more than 10 kV/s. Analytical models are developed to describe the turn-off transients of the FGTO's. Good agreement between the theoretical and experimental results could be achieved.

---

FGTO — Ein feinstrukturierter GTO-Thyristor mit verbessertem Schaltverhalten

Übersicht Zur Verbesserung des Schaltverhaltens ist ein feinstrukturierter GTO-Thyristor, abgekürzt FGTO, entwickelt worden. Dieses neue Bauelement hat eine Kathoden-streifenbreite von nur 20 m und kann ohne negative Gatevorspannung bei einer Anodenstromdichte von mehr als 200 A/cm² abgeschaltet werden. Die Abschaltzeit läßt sich durch Erhöhung des negativen Gatestroms bis zut _off 500 ns verkürzen. Beim Abschalten von FGTOs ist keine RC-Beschaltung erforderlich. Der maximale du/dl-Wert erreicht mehr als 10 kV/s. Zur Beschreibung des Abschalt-verhaltens von FGTOs werden analytische Modelle entwickelt, die eine gute Übereinstimmung mit den Meßergebnissen liefern.

     

改进R-FCN模型的小尺度行人检测

目的 为了有效解决传统行人检测算法在分辨率低、行人尺寸较小等情境下检测精度低的问题,将基于区域全卷积网络（region-based fully convolutional networks,R-FCN）的目标检测算法引入到行人检测中,提出一种改进R-FCN模型的小尺度行人检测算法。方法 为了使特征提取更加准确,在ResNet-101的conv5阶段中嵌入可变形卷积层,扩大特征图的感受野;为提高小尺寸行人检测精度,在ResNet-101中增加另一条检测路径,对不同尺寸大小的特征图进行感兴趣区域池化;为解决小尺寸行人检测中的误检问题,利用自举策略的非极大值抑制算法代替传统的非极大值抑制算法。结果 在基准数据集Caltech上进行评估,实验表明,改进的R-FCN算法与具有代表性的单阶段检测器（single shot multiBox detector,SSD）算法和两阶段检测器中的Faster R-CNN（region convolutional neural network）算法相比,检测精度分别提高了3.29%和2.78%;在相同ResNet-101基础网络下,检测精度比原始R-FCN算法提高了12.10%。结论 本文提出的改进R-FCN模型,使小尺寸行人检测精度更加准确。相比原始模型,改进的R-FCN模型对行人检测的精确率和召回率有更好的平衡能力,在保证精确率的同时,具有更大的召回率。     

一种属性不一致性加权的K近邻分类方法

针对传统的K近邻算法在计算样本之间相似度时将每个属性视为同等重要的问题,提出了一种基于推土机距离的方法来计算每个条件属性的权重。首先根据近邻关系划分用于比较一致性的两个分布;之后根据推土机距离设计不一致性评价函数,用于衡量每个属性下各个样本的近邻样本集与这一集合由决策属性细化的等价划分之间的不一致性程度;最后将近邻的不一致性程度转换为相应属性的重要性,用于实现属性加权K近邻分类器。通过在多个数据集上进行实验,该方法对参数的敏感程度低,在多个参数下可以显著提高K近邻的分类精度,并且在多个指标下的表现优于现有的一些分类方法。结果表明,该方法可以通过属性加权选择出更加准确的近邻样本,可广泛应用于基于近邻的机器学习方法中。     

Effect of deposition time on microstructures and growth behavior of ZrC coatings prepared by low pressure chemical vapor deposition with the Br<Subscript>2</Subscript>-Zr-C<Subscript>3</Subscript>H<Subscript>6</Subscript>-H<Subscript>2</Subscript>-Ar System

ZrC coatings were deposited on graphite substrates by low pressure chemical vapor deposition (LPCVD) with the Br₂-Zr-C₃H₆-H₂-Ar system. The effects of deposition time on the microstructures and growth behavior of ZrC coatings were investigated. ZrC coating grew in an island-layer mode. The formation of coating was dominated by the nucleation of ZrC in the initial 20 minutes, and the rapid nucleation generated a fine-grained structure of ZrC coating. When the deposition time was over 30 min, the growth of coating was dominated by that of crystals, giving a column-arranged structure. Energy dispersive X-ray spectroscopy showed that the molar ratio of carbon to zirconium was near 1:1 in ZrC coating, and X-ray photoelectron spectroscopy showed that ZrC was the main phase in coatings, accompanied by about 2.5mol% ZrO₂ minor phase.     

Seismic cracking analyses of two types of face slab for concrete-faced rockfill dams

Estimating the cracking capacity of the face slab and recommending effective crack-control measures are important for the anti-seismic safety of concrete-faced rockfill dams (CFRDs). In this paper, two-dimensional analyses of CFRDs are performed to simulate the seismic cracking behavior of conventional reinforced concrete (RC) face slab and a type of composite face slab. The composite face slab is composed of a ductile fiber-reinforced cement-based composite (DFRCC) layer and an RC substrate. For this purpose, a co-axial rotating smeared crack model for concrete and DFRCC is coupled with the generalized plasticity model for the rockfill material, and then implemented in a finite element program. The results show that during strong earthquakes, an RC slab is more likely to develop a penetrating macro-crack in its thickness dimension. In contrast, the crack-controlling composite slab demonstrates excellent resistance to seismic cracking, and no penetrating macro-cracks are observed. Major harmful cracks that form in the concrete substrate are stopped by the DFRCC layer in composite slabs.     

Differential amplification method for flow structures analysis of centrifugal pump between design and off-design points

Journal of Central South University - The three-dimensional internal flow field of centrifugal pump is complex and variable with design parameters and operation conditions. The post-processing...     

Controllable preparation and superior rate performance of spinel LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> hollow microspheres as cathode material for lithium-ion batteries

Spinel LiMn₂O₄ microspheres and hollow microspheres with adjustable wall thickness have been prepared using controllable oxidation of MnCO₃ microspheres precursors and following solid reactions with lithium salts. Scanning electron microscopy (SEM) investigations demonstrate that the microsphere morphology and hollow structure of precursors are inherited. The effect of hollow structure properties of as-prepared LiMn₂O₄ on their performance as cathode materials for lithium-ion batteries has been studied. Electrochemical performance tests show that LiMn₂O₄ hollow microspheres with small wall thickness exhibit both superior rate capability and better cycle performance than LiMn₂O₄ solid microspheres and LiMn₂O₄ hollow microspheres with thick wall. The LiMn₂O₄ hollow microspheres with thin wall have discharge capacity of 132.7 mA·h·g^-1 at C/10 (14.8 mA·g^-1) in the first cycle, 94.1% capacity retention at C/10 after 40 cycles and discharge capacity of 116.5 mAh·g^-1 at a high rate of 5C. The apparent lithium-ion diffusion coefficient (D _app) of as-prepared LiMn₂O₄ determined by capacity intermittent titration technique (CITT) varies from 10^-11 to 10^-8.5 cm²·s^-1 showing a regular “W” shape curve plotted with test voltages. The Dapp of LiMn₂O₄ hollow microspheres with thin wall has the largest value among all the prepared samples. Both the superior rate capability and cycle stability of LiMn₂O₄ hollow microspheres with thin wall can be ascribed to the facile ion diffusion in the hollow structures and the robust of hollow structures during repeated cycling.