Comparison of different methods for the determination of the oil content in oilseeds

The investigation and assessment of the oil content of oilseeds are important criteria, especially for the oil milling trade. Standard methods for the determination of the oil content of oilseeds are very time consuming, with extraction periods of 4 to 8 h. Three different oilseeds—rapeseed, sunflower, and soybean—are extracted by supercritical fluid extraction (SFE), accelerated solvent extraction, microwave-assisted extraction, solid fluid vortex extraction, and Soxtherm, and the results are compared with the result of the German Fat Science Society (DGF) standard method B-I 5 (87). Besides, the extracts are analyzed regarding the content of tocopherols as a parameter for mild extraction conditions and the content of diglycerides and free fatty acids as parameters for the content of more polar lipids. The results of the determination of the oil content under optimal conditions are comparable with the results of the DGF standard method B-I 5 (87). There are no significant differences between the different methods. The content of tocopherols is dependent upon the extraction method and the type of oilseed. The highest content is obtained by SFE. The content of diglycerides and free fatty acids varied according to the oilseed.     

Regiospecific analysis of conifer seed triacylglycerols by gas-liquid chromatography with particular emphasis on Δ5-olefinic acids

Dibutyroyl derivatives of monoacylglycerols (DBMAG) from conifer seed oil triacylglycerols (TAG) were prepared by partial deacylation of TAG with ethylmagnesium bromide followed by diesterification with n-butyryl chloride. The resulting mixtures were analyzed by gas-liquid chromatography (GCL) with 65% phenylmethyl silicon open tubular fused-silica capillary column operated under optimal conditions and separated according to both their fatty acid structures and their regiospecific distribution. Seed oils of 18 species from 5 conifer families (Pinaceae, Taxaceae, Cupressaceae, Cephalotaxaceae, and Podocarpaceae) were analyzed. The chromatograms showed a satisfactory resolution of DBMAG containing palmitic (16∶0) stearic (18∶0), taxoleic (cis-5, cis-9 18∶2), oleic (cis-9 18∶1), cis-vaccenic (cis-11 18∶1), pinolenic (cis-5, cis-9, cis-12 18∶3), linoleic (cis-9, cis-12 18∶2), α-linolenic (cis-9 cis-12, cis-15 18∶3), and an almost baseline resolution of DBMAG containing gondoic (cis-11 20∶1), cis-5, cis-11 20∶2, sciadonic (cis-5, cis-11, cis-14 20∶3), dihomolinoleic (cis-11 cis-14 20∶2), juniperonic (cis-5, cis-11, cis-14, cis-17 20∶4), and dihomo-α-linolenic (cis-11, cis-14, cis-17 20∶3) acids. We have observed that results for Pinus pinaster and P. koraiensis seed oils obtained with this new simple method compared favorably with literature data established with other usual regiospecific analytical techniques. Δ5-Olefinic acids are esterified mainly at the external positions of the glycerol backbone in all cases, in agreement with data obtained by other methodologies allowing validation of the GLC regiospecific method. To date, 45 gymnosperm species (mostly Coniferophytes) from 21 genera belonging to 9 families have been analyzed, all of them showing a definite enrichment of Δ5-olefinic acids in the external positions of TAG. These fatty acids (FA), with one exception only, represent between-2 and 8% of FA esterified to the internal positions. For some species, i.e., P. koraiensis and P. pinaster, this asymmetrical distribution was established by at least three analytical procedures and confirmed by stereospecific analysis of their seed TAG.     

Heterogeneous asymmetric reactions. 23. Enantioselective hydrogenation of ethyl pyruvate over cinchonine- and α-isocinchonine-modified platinum catalysts

The enantioselective hydrogenation of ethyl pyruvate to (S)-ethyl lactate over cinchonine- and -isocinchonine-modified Pt/Al₂O₃ catalysts was studied as a function of modifier concentration and reaction temperature. The maximum enantioselectivities obtained under the applied mild conditions were 89% ee using cinchonine (0.014 mmoldm^–3, 1 bar H₂, 23°C, 6% AcOH in toluene), and 76% ee in the case of -isocinchonine (0.14 mmoldm^–3, 1 bar H₂, –10°C, 6% AcOH in toluene). Since -isocinchonine of rigid structure exists only in anti-open conformation these data provide additional experimental evidence to support the former suggestion concerning the dominating role of anti-open conformation in these cinchona-modified enantioselective hydrogenations.     

Incorporation and distribution of saturated and unsaturated fatty acids into nuclear lipids of hepatic cells

Liver nuclear incorporation of stearic (18∶0), linoleic (18∶2n−6), and arachidonic (20∶4n−6) acids was studied by incubation in vitro of the [1-¹⁴C] fatty acids with nuclei, with or without the cytosol fraction at different times. The [1-¹⁴C] fatty acids were incorporated into the nuclei as free fatty acids in the following order: 18∶0>20∶4n−6≫18∶2n−6, and esterified into nuclear lipids by an acyl-CoA pathway. All [1-¹⁴C] fatty acids were esterified mainly to phospholipids and triacylglycerols and in a minor proportion to diacylglycerols. Only [1-¹⁴C] 18∶2n−6-CoA was incorporated into cholesterol esters. The incorporation was not modified by cytosol addition. The incorporation of 20∶4n−6 into nuclear phosphatidylcholine (PC) pools was also studied by incubation of liver nuclei in vitro with [1-¹⁴C]20∶4n−6-CoA, and nuclear labeled PC molecular species were determined. From the 15 PC nuclear molecular species determined, five were labeled with [1-¹⁴C]20∶4n−6-CoA: 18∶0–20∶4, 16∶0–20∶4, 18∶1–20∶4, 18∶2–20∶4, and 20∶4–20∶4. The highest specific radioactivity was found in 20∶4–20∶4 PC, which is a minor species. In conclusion, liver cell nuclei possess the necessary enzymes to incorporate exogenous saturated and unsaturated fatty acids into lipids by an acyl-CoA pathway, showing specificity for each fatty acid. Liver cell nuclei also utilize exogenous 20∶4n−6-CoA to synthesize the major molecular species of PC with 20∶4n−6 at the sn-2 position. However, the most actively synthesized is 20∶4–20∶4 PC, which is a quantitatively minor component. The labeling pattern of 20∶4–20∶4 PC would indicate that this molecular species is synthesized mainly by the de novo pathway.     

Mechanistic aspects of methanol oxidation on platinum-based electrocatalysts

An understanding of the overall mechanism of the electrooxidation of methanol is of considerable interest in relation to the optimization of the direct methanol fuel cell. This paper describes in detail the different steps in the oxidation of methanol on platinum-based electrocatalysts with the identification of the key adsorption steps and of the different intermediates involved. From these fundamental studies, it is shown how it is possible to design multimetallic electrocatalysts for the electrooxidation of methanol under experimental conditions suitable for fuel cell application.     

Catalytic use of zeolites in the Prins reaction of arylalkenes

The Prins reaction of various arylalkenes with paraformaldehyde on different zeolites as solid acid catalysts was studied. The main product of the reaction under the experimental conditions used was found to be the corresponding 1,3-dioxane. Of the catalysts tested, beta (75) zeolite proved the most active and selective in the Prins reaction of styrene, with a selectivity of 41.4% and a conversion of 95%. Other zeolites such as USY and, especially, ZSM-5, provided much lower yields. The reactions of other arylalkenes were found to be strongly influenced by the substituents on the double bond.     

Experimental analyses of the poly(vinyl chloride) foams' mechanical anisotropic behavior

Assessing a full set of mechanical properties is a rather complicate task in the case of foams, especially if material models must be calibrated with these results. Many issues, for example anisotropy and heterogeneity, influence the mechanical behavior. This article shows through experimental analyses how the microstructure affects different experimental setups and it also quantifies the degree of anisotropy of a poly(vinyl chloride) foam. Monotonic and cyclic experimental tests were carried out using standard compression specimens and non‐standard tensile specimens. Results are complemented and compared with the aid of a digital image correlation technique and scanning electron microscopy analyses. Mechanical properties (e.g., elastic and plastic Poisson's ratios) are evaluated for compression and tensile tests, for two different material directions (normal and in‐plane). The material is found to be transversely isotropic. Differences in the results of the mechanical properties can be as high as 100%, or even more depending on the technique used and the loading direction. Also, the experimental analyses show how the material's microstructure behavior, like the evolution of the herein identified “yield fronts” and a “spring back” phenomenon, can influence the phenomenological response and the failure mechanisms as well as the hardening curves. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Influence of β‐nucleation on polymorphism and properties in random copolymers and terpolymers of propylene

The competition between α, β, and γ polymorphs has been studied in several random copolymers and terpolymers of propylene, by performing X‐ray diffraction and differential scanning calorimetry experiments. Formation of β‐crystals, achieved by the addition of a β‐nucleating agent, was found to be highly dependent on comonomer type and crystallization conditions. Additionally, the mechanical properties have been evaluated from stress‐strain, microhardness and dynamic‐mechanical thermal analyses. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Preparation and characterization of β‐cyclodextrin‐linked chitosan microparticles

Hydrophobically modified chitosan containing β‐cyclodextrin (CD) units was synthesized by using tosylated β‐CD. The final product was characterized by Fourier transform infrared (FTIR) spectroscopy, elemental analysis and TGA, and rheometry. The polymer bearing β‐CD moieties was used to obtain crosslinked microparticles by spray‐drying which could then be used in a controlled release system for drugs. FTIR confirmed the formation of an amide linkage between cyclodextrin and chitosan. As fluorescence spectroscopy demonstrated, hydrophobic microenvironments were formed by chitosan bearing cyclodextrin in solution at lower concentrations than for chitosan. Rheometry and FTIR showed the crosslinking of the new polymer using genipin, a molecule of natural origin. Microspheres (MS) obtained by spray‐drying showed narrow size distribution when β‐CD was grafted onto chitosan and ξ‐potential of MS was slightly lower although it remained positive. In conclusion, β‐CD linked chitosan polymer can be considered as a very promising controlled drug delivery system for drugs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Novel copolymer for SiO2 nanoparticles dispersion

High performance polymers exhibiting multifunctional characteristics can be achieved by the introduction of inorganic nanoparticles like SiO₂ into the functional polymers. In the present work a copolymer epoxy poly(dimethylacrylamide) was synthesized to disperse the SiO₂ nanoparticles. The aim of the work is to develop a new method/process/material for the dispersion of nanoparticles and evaluating the performance of these composites. FT‐IR studies of the polymer adsorbed SiO₂ nanoparticles confirmed that the polymer molecules chain was anchored on the surface of the SiO₂ nanoparticles. The improved interfacial interaction between the particles and polymer enhanced the thermal properties of the composites. The results also show the newly synthesized polymer disperse the nanoparticles well as evidenced by SEM analysis, the uniformly dispersed SiO₂ nanoparticles in the polymer matrix and the particles almost remained in their original shape and size even after incorporation in to the polymer matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012