Catalytic aerobic oxidation of ethylbenzene over Co/SBA-15

Co(II)O was highly dispersed in the mesopores of SBA-15 by alcoholic impregnation method and characterized by XRD, TEM, UV–VIS DRS, TPR, and XRF techniques. It was found that tetrahedral coordinated Co(II)O was stabilized by SBA-15 at low Co-loading. Co/SBA-15 showed much higher activity than Co(OAc)₂ or Co₃O₄ in the liquid-phase aerobic oxidation of ethylbenzene under solvent-free condition.     

涂层转移法精密铸造技术在子午线轮胎模具制造中的应用

子午线轮胎模具计算机辅助快速制造系统是由ＣＡＤ技术、快速成型技术、涂层转移法精密铸造技术、材料技术等多项高新技术组合而成的一项独特的先进制造技术。该系统充分利用液态材料成型任意性和高再现性的特点，具有适应性强、重复性好、加工周期短、制造成本低的特点。     

一种低温高光泽艺术陶瓷装饰用大红釉的研制

使用低温含铅透明釉为基础釉，选用适宜的包裹红色料，研制成功一种艺术瓷用高光泽大红釉，并探讨了不同因素对大红釉呈色的影响。     

Preparation of porous poly(lactic acid)/Sio2 hybrid microspheres

With 3‐aminopropyltriethoxysilane (APTES) as coupling agent, poly(lactic acid) (PLA)/SiO₂ hybrid material was prepared to produce poly(lactic acid)/SiO₂ hybrid microspheres (PLAHs) with porous structure bythe oil‐in‐water, single‐emulsion solvent evaporation method. Field scanning electron microscopy results show that the PLAHs were porous microspheres about 20 μm in diameter. The holes in the PLAHs opened outside and were not complicated. A nitrogen adsorption–desorption experiment showed that the nitrogen adsorbed in the holes was easily desorbed, and the specific surface area of the PLAHs was calculated to be 6.87 m²/g according to the Brunauer–Emmett–Teller equation. Fourier transform infrared spectroscopy results show that PLA was amidated with APTES successfully and formed a kind of organic–inorganic hybrid material by hydrolysis and con‐condensation with tetraethoxysilane. Moreover, the molecular structure of the hybrid material was confirmed by X‐ray photoelectron spectroscopy. Differential scanning calorimetry results show that the melting point ofthe PLAHs was higher than that of PLA by about 11.2°C. These PLAHs may be used in the controlled release of drugs by the embedding of the drugs in the holes of the PLAHs, and the drug loading amount can be controlled by the size and number of holes in the PLAHs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 679–683, 2006     

纳米电路交叉冗余容错技术研究

提出了一种针对纳米电路的数字电路容错设计新方法．该方法基于交叉冗余原理,利用两种二进制错误的不对称性,采用模块化方法对纳米电路进行容错设计．以阵列乘法器为例,采用新方法对电路进行设计和仿真,并结合实验结果与传统的可重构和三模冗余容错方法进行比较．交叉冗余方法无需检测模块及表决器,不会增加系统延时,并且在资源消耗方面远低于传统方法,对纳米电路尤其适用．     

虚拟机在计算机实践教学中的应用

针对目前计算机实践教学中存在的问题,提出了一种虚拟机技术的解决方法。该方法不仅充分有效地利用现有设备,而且对硬件及系统具有很好的安全性,并能够增加学生的实践动手机会。教学上更加灵活、方便地设计实践项目,从而提高实践教学的质量。     

Spacecraft formation control strategy on Sun-Earth Lissajous orbit

To carry out the deep space exploration tasks near Sun-Earth Libration point L2, the CRTBP dynamic model was built up and the numerical conditional quasi-periodic orbit (Lissajous orbit) was computed near L2. Then, a formation controller was designed with linear matrix inequality to overcome the difficulty of parameter tuning. To meet the demands of formation accuracy and present thruster’s capability, a threshold scheme was adopted for formation control. Finally, some numerical simulations and analysis were completed to demonstrate the feasibility of the proposed control strategy.     

基于小波神经网络的无线电引信目标识别新方法

设计了基于小波神经网络的无线电引信目标识别新方法.根据无线电引信回波多普勒信号功率主要集中在低频部分的特点,对淹没在噪声中的无线电引信同波信号进行小波分解,提取在不同频带内信号能量作为特征,用小波神经网络对目标进行检测.针对不同信噪比,对某典型无线电引信回波信号进行定量研究,实验结果表明该方法处理信号信噪比达-7 dB.     

物探方法在隧道勘查中的应用探讨

通过对若干隧道的物探勘查表明,合理的运用高密度电法、地震折射波法和瞬态瑞雷波法以及声波测井法,可以有效的查明隧址区第四系覆盖层厚度、基岩垂向分带情况,推定断裂等构造破碎带的位置和产状,计算岩体波速、划分围岩级别,为隧址区的工程评价和隧址的合理选择提供科学依据。指出目前折射波法勘探存在的局限性,强调综合物探的合理性。提出采用高密度电阻率法、声波测井法和瞬态瑞雷波法的综合勘查方法进行隧道工程物探勘查,期望能为今后的隧道物探勘查提供指导。     

现代城市综合管理的本质、功能与体系再认识

城市综合管理需要建立一个超越部门的协调体制,包括建构一个市长牵头的城市综合管理委员会,下设专门的办公室,并与专门设置或指定的城市综合管理部门合署办公,同时建立与城市基础功能有关的部门、单位之间的公务协助机制,制定履行城市综合管理职能的评价指标和奖惩标准,完善城市综合管理的相关法规或文件,引入数字技术等现代化手段和社会公众等监督与评价机制。