Lipase PS-catalyzed transesterification of citronellyl butyrate and geranyl caproate: Effect of reaction parameters

Pseudomonas sp. lipase PS was immobilized by adsorption and tested for its ability to catalyze the synthesis of citronellyl butyrate and geranyl caproate by transesterification in n-hexane. The reaction parameters investigated were: enzyme load, effect of substrate concentration, added water, temperature, time course, organic solvent, pH memory, and enzyme reuse. Yields as high as 96 and 99% were obtained for citronellyl butyrate and geranyl caproate, respectively, with 300 units (approx. 15% w/w of reactants) of lipase PS. Increasing amounts of terpene alcohol inhibited lipase activity, while excess acyl donor (triacylglycerol) concentration enhanced ester production. Optimal yields were obtained at temperatures from 30–50°C after 24-h incubation time. Yields of 90 and 99% were obtained for citronellyl and geranyl esters, respectively, with 2% added water. Solvents with log P values ≥ 2.5 showed the highest conversion yields. pH 7 and 6–8 seemed to be ideal for citronellyl butyrate and geraniol caproate, respectively. The lipase remained active after reusing 12 times.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

Preparation and properties of raney nickel electrodes on Ni-Zn base for H2 and O2 evolution from alkaline solutions Part I: electrodeposition of Ni-Zn alloys from chloride solutions

Experimental results for the electrodeposition of Ni-Zn alloys from chloride solutions, with addition of H₃BO₃ and without other additives, in a laboratory cell with a perforated nickel sheet cathode and with recirculating electrolyte are presented. The dependence of the zinc content in the alloy on the following operating conditions was investigated: cathodic current density, 1.0–20.0 A dm^–2; temperature, 35–65°C; pH 1.5–5.5; total molarity,M _tot=M _Ni ²⁺ +M _Zn ²⁺ =1.1–2.8 M; and, molar ratio,P=M _Ni ²⁺ /M _Zn ²⁺ =1.0–15. Depending on the operating conditions the Zn content in the alloy varied over the range 22–88 mol%. In separate experiments galvanostatic polarization curves were measured in the direction of increasing and then decreasing cathodic current density in the range 0.1–20.0 A dm^–2 with all other operating conditions as used for electroplating experiments. In all cases significant hysteresis effects were observed. It was found that the current efficiency for the electrodeposition of Ni-Zn alloys from chloride solutions as a function of the zinc content in the alloy showed a sharp minimum of about 55% atX _Zn=55 mol % irrespective of other operating conditions.     

Wearable cognitive assistants in a factory setting: a critical review of a promising way of enhancing cognitive performance and well-being

Cognition, Technology & Work - Rapid technological innovations are constantly influencing the complexification and automatization of the work lines pushing human operators to use diverse...     

Runout effects in milling: Surface finish, surface location error, and stability

This paper investigates the effect of milling cutter teeth runout on surface topography, surface location error, and stability in end milling. Runout remains an important issue in machining because commercially-available cutter bodies often exhibit significant variation in the teeth/insert radial locations; therefore, the chip load on the individual cutting teeth varies periodically. This varying chip load influences the machining process and can lead to premature failure of the cutting edges. The effect of runout on cutting force and surface finish for proportional and non-proportional tooth spacing is isolated here by completing experiments on a precision milling machine with 0.1 μm positioning repeatability and 0.02 μm spindle error motion. Experimental tests are completed with different amounts of radial runout and the results are compared with a comprehensive time-domain simulation. After verification, the simulation is used to explore the relationships between runout, surface finish, stability, and surface location error. A new instability that occurs when harmonics of the runout frequency coincide with the dominant system natural frequency is identified.     

Knowledge base support for dynamic information system management

Enterprise activities are governed by regulations and laws that are multiple, heterogeneous and not always easy to understand. The arising and/or the modification of these regulations and laws can cause a significant impact in the business context, especially in terms of enterprise information systems adaptation. Currently, there are many methodological and technological tools that facilitate the application of regulations and procedures, but they are not integrated enough to ensure a complete problem management. Therefore, they are not sufficient to support organizations and companies in the management of their business processes. In this paper we propose a methodological and technological solution, able to model, manage, execute and monitor business processes of complex domains. The system allows both the design of an information system and its prototyping as a web application, by the extension of an appropriately selected Business Process Management suite. During both the design and the usage phases of the prototyped information system, it is possible to interface with a knowledge base that contains information about regulations and aspects that characterize the enterprise (organizational chart, tasks, etc.).     

Note: flowing ion population from a resonance cavity source

The experimental low energy plasma for hemispherical analyzers nominal testing thermal plasma facility of Dartmouth College uses a microwave plasma source which generates an ionosphere-like plasma through a two-step process. The plasma is initially generated inside a cylindrical, insulated, resonance cavity. This initial plasma must pass through a sheath in order to enter the main experimental region. This process imparts a significant flow velocity to the ions which has been neglected in previous analysis of this plasma source. We predict the flow energy of the ions to be between 12-15 eV depending on conservation laws and show agreement with experimental results.     

In-focus electron microscopy of frozen-hydrated biological samples with a Boersch phase plate

We report the implementation of an electrostatic Einzel lens (Boersch) phase plate in a prototype transmission electron microscope dedicated to aberration-corrected cryo-EM. The combination of phase plate, C_s corrector and Diffraction Magnification Unit (DMU) as a new electron-optical element ensures minimal information loss due to obstruction by the phase plate and enables in-focus phase contrast imaging of large macromolecular assemblies. As no defocussing is necessary and the spherical aberration is corrected, maximal, non-oscillating phase contrast transfer can be achieved up to the information limit of the instrument. A microchip produced by a scalable micro-fabrication process has 10 phase plates, which are positioned in a conjugate, magnified diffraction plane generated by the DMU. Phase plates remained fully functional for weeks or months. The large distance between phase plate and the cryo sample permits the use of an effective anti-contaminator, resulting in ice contamination rates of <0.6 nm/h at the specimen. Maximal in-focus phase contrast was obtained by applying voltages between 80 and 700 mV to the phase plate electrode. The phase plate allows for in-focus imaging of biological objects with a signal-to-noise of 5-10 at a resolution of 2-3 nm, as demonstrated for frozen-hydrated virus particles and purple membrane at liquid-nitrogen temperature.     

'Tacitus' project: identifying multi-sensory perceptions in creative 3D practice for the development of a haptic computing system for applied artists

This paper outlines the major motivating factors concerning a novel collaborative project between Edinburgh College of Art and Edinburgh Virtual Environment Centre. The Tacitus project will investigate the use of multi-modal virtual environments, specifically, the haptic (touch) modality, with regards to the creative processes employed by designers working within the field of applied arts. The salient areas of research are described, and the methods by which information regarding these areas will be obtained are considered. Initial investigations have revealed a strong need to mimic the traditional applied artists' workspaces, with co-location of visual and haptic cues a priority.