Optimisation of rancidity stability in long‐chain PUFA concentrates obtained from a rainbow trout (Oncorhynchus mykiss) by‐product

This research was focused on the production of polyunsaturated fatty acid concentrates from a farmed rainbow trout (Oncorhynchus mykiss) by‐product (i.e. belly muscle). The effect of different process variables (urea/fatty acids (FA) contents ratio, crystallisation time and temperature and stirring speed of the urea/FA mixture) on the lipid oxidation development during the urea complexation process was investigated. For this purpose, an experimental design (26 runs) following the response‐surface methodology was developed. As a result, peroxide value and TOTOX index showed to be dependent on the crystallisation time and temperature and the urea/FA ratio, while no influence of the crystallisation stirring speed was detected on both indices; additionally, polyene index was affected by the urea/FA ratio and its interaction with the crystallisation time. An optimised desirability score near 1.0 was attained provided values of 2.8 °C, 3.05 h and 3.57 were applied for crystallisation temperature, crystallisation time and urea/FA ratio, respectively.     

Study of the influence of the pH media dissolution, degree of polymerization, and degree of swelling of the polymers on the mechanism of release of diltiazem from matrices based on mixtures of chitosan/alginate

The dissolution profiles of formulations based on mixtures of chitosan/alginate depend on the pH. It is possible to distinguish two processes: (a) a fast kinetic drug release up to 180 min, where the pH value changes from 1.17 to 2.21 and the drug released is controlled by the degree of polymerization and the quantity of chitosan in the formulation; (b) a low kinetic drug release between 210 and 480 min, where the pH value changes from 5.52 to 8.72 and the drug release from the matrix is controlled by the interpolymeric complex. In all formulations the order of release, according to Peppas's model in the range of fast kinetic drug release, was between 0.5 and 1.0. The mechanism of release was non-fickian diffusion, which corresponds to a coupling mechanism of diffusion and relaxation of the polymer.     

VLSI placement and area optimization using a genetic algorithm tobreed normalized postfix expressions

We present a genetic algorithm (GA) that uses a slicing tree construction process for the placement and area optimization of soft modules in very large scale integration floorplan design. We have overcome the serious representational problems usually associated with encoding slicing floorplans into GAs and have obtained excellent (often optimal) results for module sets with up to 100 rectangles. The slicing tree construction process used by our GA to generate the floorplans has a runtime scaling of O(n lg n). This compares very favorably with other recent approaches based on nonslicing floorplans that require much longer runtimes. We demonstrate that our GA outperforms a simulated annealing implementation with the same representation and mutation operators as the GA     

Initial in-orbit results from a low-cost atmospheric ozone monitor operating on board the FASat-Bravo microsatellite

In 1994, a collaborative programme was set up between the University of Surrey and the Chilean Air Force to design and build a low-cost 50 kg microsatellite with instrumentation capable of monitoring the distribution and concentration of stratospheric ozone, particularly over Chilean territory. This resulted in the joint design and development of the ozone-layer monitoring experiment (OLME), which was flown on board the resultant FASat-Bravo microsatellite, launched in July 1998 into an 820 km altitude Sun-synchronous orbit. The nadir-pointing OLME measures the solar ultraviolet light backscattered from the atmosphere in four spectral bands. From these raw radiometric data, total column ozone concentrations can be deduced. Since the launch, a series of high-spatial-resolution measurements have been made over Chilean scientific stations, while continuous low-spatial-resolution measurements have been used to provide global coverage. To date, the University of Surrey has concentrated on these global measurements, and has used a simplified ozone retrieval algorithm to check the results qualitatively against ozone maps produced by NASA's Earth Probe Total Ozone Mapping Spectrometer (TOMS) payload. These initial results look promising, with apparently good correlation between the two datasets. A novel, more-complex retrieval algorithm has been applied to the high-resolution data, and early results have shown agreement with the TOMS.     

Gramicidin Ion Channel-Based Biosensors: Construction, Stochastic Dynamical Models, and Statistical Detection Algorithms

This paper deals with the experimental construction, stochastic modeling, and statistical signal processing of a novel, artificially constructed biosensor comprised of biological ion channels. Such nanoscale biosensors have been built by incorporating dimeric gramicidin A (bis-gA) ion channels into bilayer membranes of giant unilamellar liposomes, and then excising small patches of the membrane loaded with ion channels. We present a stochastic model for the response of the biosensor and present statistical model validation tests to verify the adequacy of the model. We show that in the presence of specific target molecules, the statistics of the gating mechanisms of the gA channels are altered. By capturing the change in real time, we devise a maximum-likelihood detector to detect the presence of target molecules. To test the sensitivity of this model, we conducted patch-clamp experiments with two compounds known to inhibit conduction of the gA channels. We found experimentally that the real-time detection algorithm was able to accurately identify the addition of the compounds even when the alterations in the patch-clamp recordings were very small. This algorithm provides the sensitive detection system for ongoing development of lipid-based nanosensors.     

Continuous Laboratory Gold Solvent Extraction from Cyanide Solutions using LIX 79 Reagent

Continuous laboratory solvent extraction of gold from cyanide solutions has been investigated by using LIX 79 guanidine‐based extractant. Different variables that affected the extraction included aqueous pH, extractant concentration and modifier concentration. Extraction isotherms of the aurocyanide complex with respect to the other cyanoanions were compared, and the following order of selectivity was observed: Au > Ag > Cu > Zn > Fe. According to the pH isotherms, aurocyanide can be extracted in alkaline media, and a better separation with respect to other cyano anions was obtained in the pH range 10.5–11.2. From the McCabe‐Thiele diagrams, better recovery was observed when using LIX 79 and tridecanol at 10 vol.‐%. Stripping gold from the loaded organic was carried out at pH > 12 by using NaOH and NaCN solutions. The pilot plant tests indicate that a two‐stage extraction followed by one strip step are more than adequate to obtain an overall process efficiency of 92 %. However, for those cases where copper is present significantly, a copper wash stage is recommended before gold stripping. In this case, stripping of copper is accomplished at a pH 10.8, whereas the gold stripping was done at a pH of 12.0.     

Base Modification Strategies to Modulate Immune Stimulation by an siRNA

Immune stimulation triggered by siRNAs is one of the major challenges in the development of safe RNAi‐based therapeutics. Within an immunostimulatory siRNA sequence, this hurdle is commonly addressed by using ribose modifications (e.g., 2′‐OMe or 2′‐F), which results in decreased cytokine production. However, as immune stimulation by siRNAs is a sequence‐dependent phenomenon, recognition of the nucleobases by the trigger receptor(s) is also likely. Here, we use the recently published crystal structures of Toll‐like receptor 8 (TLR8) bound to small‐molecule agonists to generate computational models for ribonucleotide binding by this immune receptor. Our modeling suggested that modification of either the Watson–Crick or Hoogsteen face of adenosine would disrupt nucleotide/TLR8 interactions. We employed chemical synthesis to alter either the Watson–Crick or Hoogsteen face of adenosine and evaluated the effect of these modifications in an siRNA guide strand by measuring the immunostimulatory and RNA interference properties. For the siRNA guide strand tested, we found that modifying the Watson–Crick face is generally more effective at blocking TNFα production in human peripheral blood mononuclear cells (PBMCs) than modification at the Hoogsteen edge. We also observed that modifications near the 5′‐end were more effective at blocking cytokine production than those placed at the 3′‐end. This work advances our understanding of how chemical modifications can be used to optimize siRNA performance.     

Study of a SOFC with a bimetallic Cu–Co–ceria anode directly fuelled with simulated biogas mixtures

The present work is focused in the study of the bimetallic Cu–Co formulation combined with CeO₂ as SOFC anode, at 750 °C, direct feed of methane and two different fuel mixtures that simulate biogas. Additionally, the sulphur tolerance of new anode material has been evaluated. Its single cell evaluation, based on a samaria doped ceria (SDC) solid electrolyte and a LSM perovskite cathode, together with the electrochemical characterisation and catalytic activity tests, have allowed to demonstrate the ability of this material to operate directly with simulated biogas mixtures without loss of single cell performance due to the formation of carbon deposits or sulphur anode poisoning. The activity of this material for the exothermic oxidation of methane reduces the energy requirement of the endothermic internal methane reforming process. The cobalt doping of basic copper–ceria formulation enhanced sulphur and carbon coking tolerance of the SOFC anode material.     

Antimicrobial resistance patterns of bovine Salmonella enterica isolates submitted to the Wisconsin Veterinary Diagnostic Laboratory: 2006–2015

Salmonellosis on the dairy continues to have a significant effect on animal health and productivity and in the United States. Additionally, Salmonella enterica ssp. enterica causes an estimated 1.2 million cases of human illness annually. Contributing to the morbidity and mortality in both human and domestic animal species is emergence of antimicrobial resistance by Salmonella species and increased incidence of multidrug-resistant isolates. This study describes serotype distribution and the antimicrobial resistance patterns for various Salmonella serotypes isolated from bovine samples submitted to the Wisconsin Veterinary Diagnostic Laboratory (WVDL) over the past 10 yr. Salmonella serotyping and antimicrobial susceptibility testing data were obtained from the laboratory information management system at WVDL. Data from accessions were limited to bovine samples submitted to the WVDL between January 2006 and June 2015 and those that had both a definitive serotype and complete results for antimicrobial susceptibility testing. A total of 4,976 isolates were identified. Salmonella enterica ser. Dublin was the most prevalent serotype identified among bovine samples submitted to the WVDL, accounting for a total of 1,153 isolates (23% of total isolates) over the study period. Along with Dublin, Salmonella enterica ser. Cerro (795, 16%), Newport (720, 14%), Montevideo (421, 8%), Kentucky (419, 8%), and Typhimurium (202, 4%) comprised the top 6 most commonly isolated serotypes during that time. Overall, resistance of bovine Salmonella isolates in the study population remained stable, although decreases in resistance were noted for gentamicin, neomycin, and trimethoprim sulfamethoxazole during the study period. All isolates remained susceptible to enrofloxacin. These data show that antimicrobial susceptibility for bovine Salmonella has changed in the population served by WVDL in the past 10 yr. This information is important for understanding Salmonella disease ecology in Wisconsin. Our findings are also relevant for animal and public health by improving informed antimicrobial use, new drug development, and regulation of their use in food animals.     

Fluctuation of cardiotocographic tracings during labor in fetal growth retardation

The objective of our study was to analyse the fluctuation of cardiotocographic scores during labor in fetal growth retardation (FGR). The study took place at the University hospital "Principe de Asturias", Alcalá de Henares, Madrid, Spain. 170 at term FGR fetuses and 170 at term fetuses without FGR as control group were compared using modified Fischer scores, which were blindly performed at 3, 5 and 10 cm of cervical dilatation. As results we found out that the mean value of the Fischer score was significantly lower in FGR at 3 cm of cervical dilatation (8.1 +/- 1 vs 8.7 +/- 0.6), as well as at 5 cm (7.6 +/- 0.9 vs 8.1 +/- 0.7) and at 10 cm (6.7 +/- 0.8 vs 7.4 +/- 0.8). Poor prognosis cardiotocograms were also more common in FGR than in the control group in the three cut-offs points studied (7.5% vs 0.6% at 3 cm, 9.8 vs 1.8 at 5 cm and 37.9 vs 11.6 at complete cervical dilatation). The afore mentioned differences were more remarkable as labor advanced. Conclusions are that poor fetal heart rate recordings were detected in FGR at the beginning of labor when compared with control group fetuses and the differences between both groups increased while the labor prolonging.