高速线材轧制用硬质合金轧辊的质量控制

通过对高速线材轧制用硬质合金轧辊 (轧槽 )失效机理的分析 ,提出了高速线材轧制用硬质合金轧辊质量控制的基本方法 ,认为轧辊质量控制的关键在于轧辊材料设计、生产工艺过程控制、轧制过程、轧机工况、轧辊储运装卸以及轧制环境因素的控制 ,并建议尽早制订相关的材料和产品质量标准。     

Feature-based classifiers for design optimization

We present a design optimization method for systems with high-dimensional parameter spaces using inductive decision trees. The essential idea is to map designs into a relatively low-dimensional feature space, and to derive a classifier to search for high-performing design alternatives within this space. Unlike learning classifier systems that were pioneered by Holland and Goldberg, classifiers defined by inductive decision trees were not originally developed for design optimization. In this paper, we explore modifications to such classifiers to make them more effective in the optimization problem. We expand the notions of feature space, generalize the tree construction heuristic beyond the original information-theoretic definitions, increase the reliance on domain expertise, and facilitate the transfer of design knowledge between related systems. There is a relatively small but rapidly growing body of work in the use of inductive trees for engineering design; the method presented herein is complementary to this research effort.     

丙烯腈急冷塔喷淋系统流道分析与优化

对国内现有丙烯腈装置急冷塔循环液喷淋器的分流流道进行了研究。对喷头堵塞情况作了理论分析，并运用计算机编程模拟计算出喷淋器中各喷头的流体分布情况。在此基础上提出了分流流道的优化方案，从而改善了急冷塔内的操作状况，减少了丙烯腈在急冷塔内的损失。     

HDPE/CB-GP复合材料体系电性质的研究

当HDPE含量46％（质量分数，以下同）、其它添加剂（如抗氧剂、阻燃剂、交联剂和润滑剂等辅助填料）的含量11％，两种导电填料石墨（GP）和碳黑（CB）的总含量为43％时，研究结果表明石墨含量的变化对HDPE/CB-GP复合材料室温电阻率、阴C强度和后NTC强度有显著的影响．HDPE/CB-GP复合材料中GP的含量〈8．6％时，样品的室温电阻率〈30Ω·m，PTC强度〉7、后NTC强度〈1．3；电阻率．温度曲线经过17次冷热循环后重现性好，复合材料具有实际应用价值；GP在复合材料中为层片状结构。     

AN improved method of optimization for electrical machines

Methods of optimizing the design of electrical machines are discussed. The augmented Lagrangian multiplier method is described, and an algorithm for this method is introduced. The method is compared with the more familiar exterior penalty function method using, as an example, the cost optimization of permanent magnetic variable-speed drive motors. The improved method is shown to be superior, both in its ability to reach an optimum consistently and in the number of required iterations     

MIKEII 软件系统在穆棱河流域面源污染估算中的应用

穆棱河流域面源污染入河量调查和估算采用了MIKEII软件系统，根据水质、水量实测数据，在参数率定和模型验证的基础上．对穆棱河部分河段的水质进行模拟，拟合出面源入河量和年内分布。经验证计算结果较其他方法更合理可靠。     

氮气氛下LTCC基板Cu共烧金属化研究

从PMMA型LTCC素坯膜的制备和PMMA的排胶机理两方面，研究了LTCC基板Cu共烧金属化。结果表明，采用PMMA作为粘结剂的流延浆料具有剪切变稀行为，所得的流延坯膜微观组织均匀，叠压后坯体内部无分层现象。热失重、差热和傅立叶红外光谱联用分析结果表明高纯N2气氛中PMMA以解聚机理热解，热解后释放的主要产物为丙烯酸甲酯。在高纯N2气氛中LTCC与Cu共烧后Cu金属化膜平整、致密，连通良好。经测试，基板表面Cu导体方阻小于5mΩ/□。