变长线扫描选择性激光烧结快速成型工艺的质量和效率优势分析

本文分析变长线扫描选择性激光烧结快速成型工艺对点扫描工艺的质量和效率优势.对二者光学系统结构作分析对比,对焦斑和线束上的功率密度作计算对比.变长线扫描系统采用的扫描方式和聚焦元件使线束宽度小且恒定,线束功率密度与点扫描焦斑的相当.变长线扫描选择性激光烧结快速成型工艺的质量优势是明显的,效率比点扫描工艺提高一倍左右.     

Use of radial forces for fault detection in tapping

A model-based method for fault detection in tapping based on torque and radial forces is proposed. The method allows the identification of faults typical of a tapping operation including axial misalignment, tap runout, tooth breakage both singly and together. The validation experiments have been run on aluminum 356 workpieces for different combinations of process faults. Results have shown that the model predictions are in good agreement with the experimental radial force and torque signals under various fault conditions.     

宽带线性调频信号产主技术研究

本文介绍了采用数字基带产生结合倍频链扩展带宽的方法设计与实现了大带宽线性调频信号产生系统。详细分析研究了实现系统的三项关键技术，给出并分析了相应环节的输出信号。对系统进行了预失真补偿处理，成功实现了ＶＨＦ／ＵＨＦ波段、带宽达３００ＭＨｚ线性调频信号的产生。经脉冲压缩处理，主瓣旁瓣比（ＰＳ１Ｒ）在－３７ｄＢ以下。     

纳米技术与“纳米涂料”之我见

概述了纳米技术、纳米材料、“纳米涂料”的现状 ,重点讨论了纳米技术在涂料中应用遇到的问题和建议措施 ,对纳米技术的科研方向及其在涂料中应用的发展提出了看法。     

中关村中心区水文地质及工程地质特征

本文全面、系统地分析了北京市中关村中心区的水文地质及工程地质特征 ,为该地区的工程建设提供可靠的地质资料     

我国“十五“电力供需预测分析

分析“十五”期间我国电力需求预测和电力预测中的不确定因素,提出建议采取的措施。     

巨型结构的抗震分析

采用ANSYS有限元程序对巨型框架结构、巨型框架隔震结构进行了抗震动力时程分析,讨论了两种结构在多条地震波作用下的动力位移及内力等地震响应,其计算结果对于确保巨型框架结构的抗震安全性具有较大的意义,对巨型框架结构的抗震设计有较大的参考价值。     

Influence of ethyl methacrylate content on the volume‐phase transition of temperature‐sensitive poly[(N‐isopropylacrylamide)‐co‐(ethyl methacrylate)] microgels

A novel series of temperature‐sensitive poly[(N‐isopropylacrylamide)‐co‐(ethyl methacrylate)] (p(NIPAM‐co‐EMA)) microgels was prepared by the surfactant‐free radical polymerization of N‐isopropylacrylamide (NIPAM) with ethyl methacrylate (EMA). The shape, size dispersity and volume‐phase transition behavior of the microgels were investigated by transmission electron microscopy (TEM), ultraviolet–visible (UV–Vis) spectroscopy, dynamic light scattering (DLS) and differential scanning calorimetry (DSC). The transmission electron micrographs and DLS results showed that microgels with narrow distributions were prepared. It was shown from UV–Vis, DLS and DSC measurements that the volume‐phase transition temperature (VPTT) of the p(NIPAM‐co‐EMA) microgels decreased with increasing incorporation of EMA, but the temperature‐sensitivity was impaired when more EMA was incorporated, causing the volume‐phase transition of the microgels to become more continuous. It is noteworthy that incorporation of moderate amounts of EMA could not only lower the VPTT but also enhance the temperature‐sensitivity of the microgels. The reason for this phenomenon could be attributed to changes in the complicated interactions between the various molecules. Copyright © 2004 Society of Chemical Industry     

Delay Analysis of Interacting Queues with an Approximate Model

An approximate model of coupled Markov chains is proposed and analyzed for a slotted ALOHA system with a finite number of buffered nodes. This model differs from earlier ones in that it attempts to capture the interdependence between the nodes. The analytical results lead to a set of equations that, when solved numerically, yield the average packet delay. Comparison between computational and simulation results for a small number of nodes show excellent agreement for most throughput values, except for values near saturation. Numerical comparisons for a two-node system show that a nonsymmetric loading of the system provides better delay-throughput performance than a symmetric one.