On the solid state heat transport phenomena measurement

The paper deals with theoretical and experimental aspects of lumped capacitance model (LCM) application for the study of heat transport in different materials. Patented construction of the measuring chamber together with special software the fundamental features of which are presented here allows evaluating thermal conductivity k, specific heat capacity c_p and thermal diffusivity α. Obtained results are in relatively very good agreement with those obtained from independent measurement or table values.     

Influence of nitriding on corrosion resistance of martensitic X17CrNi16‐2 stainless steel

Nitriding increases surface hardness and improves wear resistance of stainless steels. However, nitriding can sometimes reduce their corrosion resistance. In this paper, the influence of nitriding on the corrosion resistance of martensitic stainless steel was investigated. Plasma nitriding at 440 °C and 525 °C and salt bath nitrocarburizing were carried out on X17CrNi16‐2 stainless steel. Microhardness profiles of the obtained nitrided layers were examined. Phase composition analysis and quantitative depth profile analysis of the nitrided layers were preformed by X‐ray diffraction (XRD) and glow‐discharge optical emission spectrometry (GD‐OES), respectively. Corrosion behaviour was evaluated by immersion test in 1% HCl, salt spray test in 5% NaCl and electrochemical corrosion tests in 3.5% NaCl aqueous solution. Results show that salt bath nitrocarburizing, as well as plasma nitriding at low temperature, increased microhardness without significantly reducing corrosion resistance. Plasma nitriding at a higher temperature increased the corrosion tendency of the X17CrNi16‐2 steel.     

G-quadruplex formation of oligonucleotides containing ALS and FTD related GGGGCC repeat

A largely increased number of GGGGCC repeats located in the non-coding region of C9orf72 gene have been identified as the leading cause of two related neurological disorders, familial amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD). We examined G-quadruplex forming ability of GGGGCCrepeat containing oligonucleotides with four guanine tracts chosen as the smallest possible model to form a unimolecular G-quadruplex. These oligonucleotides are readily to folded into G-quadruplexes in the presence of K⁺ ions. However, the formation of multiple structures makes structural analysis challenging and time consuming. We observed that flanking sequences on 5'- and 3'-ends as well as mutations of loop residues have a profound effect on folding. Sequence d[(G₄C₂)₃G₄] was chosen for further scrutiny and optimization of nuclear magnetic resonance (NMR) spectroscopic properties with dG to 8Br-dG substitutions at specific positions in the sequence under different folding conditions. Expectedly, folding into desired predominant topology is facilitated when substituted residue adopted a syn conformation in the naturally-occurring structure. Single dG to 8Br-dG substitution at position 21 and fine tuning of folding conditions facilitate folding of d[(G₄C₂)₃GG^BrGG] into (mostly) a single G-quadruplex, and thus enable determination of its high-resolution structure by high-field NMR.

Open image in new window

     

An interpretation of the changes in demographic behaviour at a sub-national level using spatial measures in post-socialist countries: A case study of the Czech Republic and Slovakia

The transformation of fertility and family behaviour in post-socialist countries was quick and the changes were striking. An account of the changes is the subject of dispute and the mechanisms have still not been explained in a fully satisfying manner. Relatively little attention has been paid to the changes in spatial aspects concerning the broadening of changes in family behaviour. The aim of this paper is to answer the question as to whether changes spread stochastically in post-socialist countries or if there are obvious spatial patterns. The study tries to answer the questions whether there are any cores of changes which may be understood as innovations, if there is any spatial clustering and if the extent is hierarchically arranged.     

The Effect of La2O3 Addition on Sol–Gel Derived Mullitization

Monophasic gel with stoichiometric 3Al₂O₃·2SiO₂ composition and gels with 0.99, 1.96, and 2.91 mol% La₂O₃ added were sol–gel derived. The crystallization path, structure evolution, microstructure, and morphology of calcined premullite powders and sintered ceramic bodies have been investigated as a function of La₂O₃ content and sintering temperature. In addition to mullite, spinel phase at about 980°C, and α‐alumina at above 1000°C were determined; however, neither La₂O₃ nor La‐related compounds had crystallized. The La₂O₃ predominately incorporated into the glassy phase, enhanced with La₂O₃ level, which affected both mullite structure and composition, as confirmed by electron microscopy, Rietveld structure refinement, determination of unit cell parameters, electron microscopy, and achieved density of the sintered bodies. Increased thermal treatment changes the alumina/silica ratio in mullite (towards 3:2 below 1200°C, and toward 2:1 above), and decreases the mullite/amorphous ratio. Sintered dense ceramic bodies revealed a positive densification effect and increased sinterability as a result of the lanthanum‐induced increase in glassy phase.     

Analysis of polymer viscoelastic properties based on compressive creep tests during hot embossing for two‐dimensional polyethylene terephthalate nanochannels

Hot embossing is an emerging technology, which enables cost‐effective and high‐productivity nanofabrication. It is important to optimize the processing parameters to achieve high replication accuracy nanostructure fabrication. In this article, to reveal the interrelationship between the hot embossing conditions and replication accuracy of two‐dimensional (2D) polyethylene terephthalate (PET) nanochannels, the numerical simulations were conducted by using the generalized Maxwell model. The constants of the generalized Maxwell model were calculated by a newly established fitting formula based on experimental compressive creep curves rather than tensile stress relaxation curves. Replication accuracy of 2D PET nanochannels was evaluated by a method based on weighted averages. Orthogonal method was employed during numerical simulations to optimize the hot embossing process. Under optimized hot embossing parameters, 2D PET nanochannels, ～80 nm wide, 250 nm deep and 4 mm long, were precision‐imprinted into a PET sheet. POLYM. ENG. SCI., 54:2398–2406, 2014. © 2013 Society of Plastics Engineers     

Shear‐induced shish‐kebab structures in isotactic polypropylene using acicular precipitated calcium carbonate as whisker

It has been reported in the technical literature that whiskers of rodlike single crystals can be used in order to generate shish‐kebab structures or other different lamellae morphologies during isothermal or dynamic crystallization of sheared or presheared polymer melts. The expected advantage of the changed crystalline structure is a reinforcing effect of the composite. A lot of papers reported about the application of inorganic and organic whiskers such as cellulose and chitin whiskers. This study reports on an attempt to use acicular PCC as appropriate whisker for improving mechanical properties of polypropylene. In this article special attention is given to demonstrate the effect of flow induced crystallization under varying shear conditions in order to improve the mechanical properties. The effects were demonstrated using rheology, thermal analysis, tensile testing, and transmission electron microscopy. POLYM. ENG. SCI., 54:2057–2063, 2014. © 2013 Society of Plastics Engineers