Efficacy of fluconazole in the treatment of upper gastrointestinal candidiasis in neutropenic patients with cancer: factors influencing the outcome

Fluconazole has proved to be effective in treating oropharyngeal and esophageal candidiasis in immunocompromised patients. However, sufficient data are lacking regarding the efficacy of this agent in neutropenic hosts. The aim of the present study was to determine the clinical and mycological efficacy of fluconazole and to define the factor(s) affecting the outcome of fluconazole therapy in severely neutropenic patients (peripheral neutrophil count, < 500/microL) with cancer who have oropharyngeal and/or esophageal candidiasis. One hundred eleven patients with 129 episodes of candidal infections were treated with intravenous and consequently oral fluconazole (200 mg/d and 100 mg/d, respectively). Overall clinical cure and mycological eradication rates were 82% and 56%, respectively. Persistent neutropenia (P < .01), infection with a non-albicans strain of Candida (P = .012), and administration of antifungal therapy during the second or a later neutropenic episode (P < .002) were independently associated with a worse outcome. We conclude that fluconazole is effective in the treatment of upper gastrointestinal candidiasis in neutropenic patients with cancer. Effective treatment of the underlying malignancy, with the resultant recovery from neutropenia, and the determination of the species of infecting Candida isolates are required for the prediction of the outcome of antifungal therapy.     

A VLSI sequencer chip for ATM traffic shaper and queue manager

The authors propose to control user traffic at two places in an asynchronous transfer model (ATM) network: at the user-network interface (UNI) by a traffic enforcer, and at the network-node interface (NNI) by a queue manager. The traffic enforcer adopted in this work contains a buffer to delay and reshape the violating cells that do not comply with some agreed-upon traffic parameters, and thus is also called a traffic shaper. The queue manager manages the queued cells in network nodes in such a way that higher priority cells are always served first, low-priority cells are discarded when the queue is full, and any interference between same-priority cells is prevented. Architectures for the traffic shaper and the queue manager are proposed. A key component, called the sequencer chip, has been implemented and tested to realize both architectures. The sequencer chip uses 1.2-μm CMOS technology. It contains about 150 K transistors, has a die size of 7.5 mm×8.3 mm, and is packages in a 223-pin ceramic pin-grid-array (PGA) carrier     

Rapid and slow pyrolysis of pistachio shell: effect of pyrolysis conditions on the product yields and characterization of the liquid product

This study reports the experimental results for the pyrolysis of pistachio shell under different conditions in a tubular reactor under a nitrogen flow. For the different conditions of pyrolysis temperature, nitrogen flow rate and heating rate, pyrolysis temperature of 773 K gave the highest bio-oil yield with a value of 27.7% when the heating rate and carrier gas flow rate were chosen as 300 K min⁻¹ and 100 cm³ min⁻¹, respectively. Column chromatography was applied to this bio-oil and its subfractions were characterized by elemental analysis, FT-IR and ¹H-NMR. Aliphatic subfraction was conducted to gas chromatography–mass spectroscopy for further characterization. The results for the characterization show that using pistachio shell as a renewable source to produce valuable liquid products is applicable via pyrolysis. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis, characterization and thermally activated curing of polysulfones with benzoxazine end groups

Polysulfones with benzoxazine end groups (PSU-B-a) were obtained using monomer synthesis method from the phenol terminated polysulfone (PSU-OH), aniline and paraformaldehyde as starting materials. For this purpose, the precursor PSU-OHs with different molecular weights were prepared by condensation of bisphenol-A and bis(p-chlorophenyl) sulfone in presence of potassium carbonate. The structure of the polymers before and after functionalization was confirmed by proton nuclear magnetic resonance spectroscopy (¹H NMR) and Fourier transform infrared spectroscopy (FT-IR). Thermally activated crosslinking behavior of these polymers was investigated by differential scanning calorimetry (DSC). Thermal and tensile properties of the crosslinked polymers obtained from PSU-B-a alone or with low molar mass benzoxazine (P-a) were studied by thermal gravimetric analysis (TGA) and dynamic mechanical analysis (DMA).     

Production of biodiesel from palm fatty acid distillate using sulfonated-glucose solid acid catalyst:Characterization and optimization

A palm fatty acid distillate (PFAD) has been used for biodiesel production. An efficient sulfonated-glucose acid catalyst (SGAC) was prepared by sulfonation to catalyze the esterification reaction. The effect of three variables i.e. methanol-to-PFAD molar ratio, catalyst amount and reaction time, on the yield of PFAD esters was studied by the response surface methodology (RSM). The optimum reaction conditions were:12.2:1 methanol-to-PFAD molar ratio, 2.9%catalyst concentration and 134 min of time as predicted by the RSM. The reaction under the optimum conditions resulted in 94.5%of the free fatty acid (FFA) conversion with 92.4%of the FAME yield. The properties of the PFAD esters were determined according to biodiesel standards.     

COx-free hydrogen production from ammonia decomposition over sepiolite-supported nickel catalysts

Sepiolite, a clay mineral, was utilized as a support for nickel-based catalysts for CO_x-free hydrogen production from ammonia decomposition. First, the physical and chemical properties of sepiolite were changed by calcining it at temperatures varying from 500 to 1000 °C, then nickel was impregnated on these calcined supports and tested for ammonia decomposition at various temperatures following reduction at 650 °C. Results indicated that even though the catalysts contained almost the same amount of nickel, they showed different hydrogen production performance. Detailed characterization of the catalysts before and after reaction illustrated that the support obtained by calcining sepiolite at 700 °C shows good basic properties with a high surface area offering a high degree of nickel dispersion. These properties lead to promising hydrogen production rates which are on par, if not higher, than most of the nickel-based catalysts prepared on supports, which are either not cheap or require tedious preparation procedures.     

Determination of mineral contents of wild-grown edible mushrooms

The aim of this study was to determine the mineral contents of wild edible mushrooms. The phosphorus (P), iron (Fe), calcium (Ca), zinc (Zn), magnesium (Mg), potassium (K), sodium (Na), copper (Cu) and manganese (Mn) contents of thirty wild-grown common edible mushrooms, collected from Erzurum province, Turkey, were analyzed. The minimum and maximum macronutrient contents of mushrooms were determined as mg/g dw for Mg (0.90–4.54), Ca (0.17–8.80), K (12.6–29.1), Na (0.03–4.85) and P (0.64–4.49), while minimum and maximum micronutrient contents of mushrooms were determined as mg/kg dw for Zn (26.7–185), Fe (50.1–842), Cu (9.23–107) and Mn (5.54–135). The potassium content was found to be higher than those of the other minerals in all the mushrooms. The K, P and Cu concentrations were determined to be highest in Suillus granulatus.     

Characterization of bio-oil obtained from fruit pulp pyrolysis

Apricot pulps was pyrolyzed in a fixed-bed reactor under different pyrolysis conditions to determine the role of final temperature, sweeping gas flow rate and steam velocity on the product yields and liquid product composition with a heating rate of 5 °C/min. Final temperature range studied was between 300 and 700 °C and the highest liquid product yield was obtained at 550 °C. Liquid product yield increased significantly under nitrogen and steam atmospheres. For the optimum conditions, pyrolysis of peach pulp was furthermore studied. Liquid products obtained under the most suitable conditions were characterized by FTIR and ¹H-NMR. In addition, gas chromatography/mass spectrophotometer was achieved on all pyrolysis oils. Characterization showed that bio-oil could be a potential source for synthetic fuels and chemical feedstock.     

Metal‐chelated polyamide hollow fibers for human serum albumin separation

We modified microporous polyamide hollow fibers by acid hydrolysis to amplify the reactive groups and subsequent binding of Cibacron Blue F3GA. Then, we loaded the Cibacron Blue F3GA‐attached hollow fibers with different metal ions (Cu²⁺, Ni²⁺, and Co²⁺) to form the metal chelates. We characterized the hollow fibers by scanning electron microscopy. The effect of pH and initial concentration of human serum albumin (HSA) on the adsorption of HSA to the metal‐chelated hollow fibers were examined in a batch system. Dye‐ and metal‐chelated hollow fibers had a higher HSA adsorption capacity and showed less nonspecific protein adsorption. The nonspecific adsorption of HSA onto the polyamide hollow fibers was 6.0 mg/g. Cibacron Blue F3GA immobilization onto the hollow fibers increased HSA adsorption up to 147 mg/g. Metal‐chelated hollow fibers showed further increases in the adsorption capacity. The maximum adsorption capacities of Co²⁺‐, Cu²⁺‐, and Ni²⁺‐chelated hollow fibers were 195, 226, and 289 mg/g, respectively. The recognition range of metal ions for HSA from human serum followed the order: Ni(II) > Cu(II) > Co(II). A higher HSA adsorption was observed from human serum (324 mg/g). A significant amount of the adsorbed HSA (up to 99%) was eluted for 1 h in the elution medium containing 1.0M sodium thiocyanide (NaSCN) at pH 8.0 and 25 mM ethylenediaminetetraacetic acid at pH 4.9. Repeated adsorption–desorption processes showed that these metal‐chelated polyamide hollow fibers were suitable for HSA adsorption. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3346–3354, 2002