Fuzzy-Fusion Classifier for MMV Full-Polarization Radar Target Recognition Using One-Dimensional Scattering Centers

One-dimensional (1-D) scattering centers on a target can be used for radar target recognition purpose. In this paper, a new classifier based on fuzzy techniques is proposed, which is very much suitable for target recognition using 1-D scattering centers. Furthermore, information fusion techniques for full polarimetric receiver data are utilized at the decision level. The performance of the proposed fuzzy-fusion classifier is evaluated using a dataset of five aircraft models measured by millimeter-wave (MMW) full-polarization stepped-frequency radar in the compact range facility.     

乙醇电氧化的研究进展

简要地叙述了国内外乙醇电催化氧化的研究进展，着重介绍不同电极材料对乙醇电氧化的影响及目前所提山的机理，并对其可能的研究方向提出了建议。     

The use of doped polyaniline as an electrode in the galvanic anodic protection of ferrous metals in industrial acid solutions

In order to investigate the galvanic anodic protection (GAP) of ferrous metals (such as 410, 304 and 316 stainless steels) in acid solutions by doped polyaniline (PANi), separate doped PANi powder-pressed electrodes with different surface areas (the area ratio of the PANi electrode to stainless steel is between 1:1 and 1:2) have been prepared. These were coupled with ferrous metal in the following solutions: 5 M sulphuric acid, 5 M phosphoric acid and industrial phosphoric acid (containing 5 M phosphoric acid and 0.05% chloride ion) to construct a galvanic cell, in which PANi is cathode while ferrous metal is anode. The results indicate that a PANi electrode with sufficient area can provide corrosion protection to stainless steel in these acidic solutions. A pilot scale coupling experiment was carried out. The results indicate that PANi is a promising material as an electrode for the anodic protection of ferrous metals in acidic solutions in industrial situations.     

MGD工艺技术的特点

应炼油厂要求，FCC既要多产柴油，又需多产液化气，石油化工科学研究院开发了MGD工艺。该工工艺遵循催化裂化的反应机理，把分段进料和汽油回炼紧密组合为一个体系，较好地达到了用掺渣油原料多产柴油和液化气的目的，其汽油烯烃和硫含量降低。从而使炼油厂调合汽油达到产品规格。工艺实施容易，改造投入少、见效快，受到炼油厂欢迎，并迅速推广应用。浅释了MGD工艺的反应机理，并提出了应用中应该注意的问题。     

双螺杆反应挤出模型的研究

详细研究了双螺杆中反应挤出聚合物的动力学模型、流动模型和传热模型。通过实验得到了双螺杆反应器中聚合物的停留时间分布及平均停留时间。     

PVC加工助剂的干燥工艺及设备

PVC加工助剂 ACR采用压力式喷雾干燥造粒机进行干燥。针对 ACR的热敏性 ,从进风温度、喷雾压力及干燥塔设计等方面进行阐述     

等离子体横向刻蚀硅的特性研究

研究了用SiO2 +Al作掩模 ,SF6 +O2 混合气体等离子体对Si的横向刻蚀 ,其结果表明 ,在SF6 +O2 等离子体气氛中 ,Al是很好的保护膜 ,可以在待悬浮器件下形成大的开孔。因此 ,预计用这种技术 ,可以在Si片上集成横向尺寸为数百微米 ,具有优良高频性能的MEMSRF/MW无源器件 ,如开关、传输线、电感和电容等。     

硅酸铋晶体的蚀像形貌

本文研究了提拉法生长的硅酸铋晶体(BSO)的蚀像形貌,比较了{100},{110},{211},{111}面族的腐蚀像特征和腐蚀速度,并用周期性键链(PBC)的形貌理论分析了腐蚀形貌。通过蚀像形貌特征便可方便地进行晶体定向,准确地确定各族晶面之间的相对位置和极轴的方向等。     

非晶软磁合金的巨磁阻抗效应及应用

近来在ＦｅＣｏＳｉＢ等Ｃｏ基非晶体丝带中现了巨磁阻抗效应，由于在一小的直流纵向偏置场下该效应能使丝带两端的交流电压发生大而灵敏的变化，因而在磁记录头和传顺技术中具有巨大的应用科学潜能，受到各国学者的关注，本文简单介绍了巨磁阻抗效应的来源，并综述了近年来非晶体软磁合金材料的的巨磁阻抗效应及应用的研究进展，文章最后说明了尚待深入解决的问题。     

Frequency domain transmission properties of multi-VIAS

TheS parameters of multi-vias in Multi-Chip Module(MCM) package are extracted by the Finite Difference Time Domain(FDTD) method combined with the Fourier transform and theory of network. The results demonstrate that excellent transmission properties are available at least below10GHz in Ceramic MCM(MCM-C) package and30GHz in Deposited MCM(MCM-D) package, and the transmission properties are not sensitive to the given distance between two proximate vias.