Synthesis,characterization, and DFT Raman study of pure and Mn-doped LiTaO3 nanofibers

Pure and Mn-doped lithium tantalate nanofibers, with Mn concentrations of 1%, 2.5%, and 5%, were synthesized by the electrospinning method. The morphology, microstructure, and crystal structure of as-spun and annealed composite nanofibers were characterized by scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. Raman spectroscopy has shown to be a powerful tool to detect either local variations or changes of the whole structure. Position and width of one Raman line can be used as markers of a structural change. Some vibrational modes are especially associated with the site of Li or Ta ions and so, they can be affected by the introduction of dopant ions. Any damages or local changes in the microstructure can be detected by a line broadening. With the use of Raman spectroscopy, the sites where Mn ions enter the doped structures were established by recording the shift and broadening of peaks in Mn-doped structures with respect to pure lithium tantalate. Thus it was proven that Mn ions enter the Li sites for low Mn concentration and, on the other hand, for higher concentrations, the dopant substitutes Li and Ta sites. First-principles calculations were performed within the density functional theory, including lattice-dynamic calculations of the phonon modes at the zone center (Γ point), for the pure structure, to find the irreducible representation of the modes.     

Physical and Functional Properties of Blackberry Freeze- and Spray-Dried Powders

The aim of the present work was to develop two products from blackberry juice by freeze and spray drying with potential use as food colorants or healthy ingredients. A characterization of the physical and functional properties of the powdered juices was done. Maltodextrin or a mixture of trehalose and maltodextrin were assessed as carrier matrices. Freeze-dried, maltodextrin-containing powders presented the best retention of bioactive compounds and antiradical activity; however, they showed a narrow relative humidity range for storage in the glassy state. Spray-dried powders showed better physical properties, bearing higher glass transition temperature and lower molecular mobility than freeze-dried formulations.     

OCTN1: A Widely Studied but Still Enigmatic Organic Cation Transporter Linked to Human Pathology and Drug Interactions

The Novel Organic Cation Transporter, OCTN1, is the first member of the OCTN subfamily; it belongs to the wider Solute Carrier family SLC22, which counts many members including cation and anion organic transporters. The tertiary structure has not been resolved for any cation organic transporter. The functional role of OCNT1 is still not well assessed despite the many functional studies so far conducted. The lack of a definitive identification of OCTN1 function can be attributed to the different experimental systems and methodologies adopted for studying each of the proposed ligands. Apart from the contradictory data, the international scientific community agrees on a role of OCTN1 in protecting cells and tissues from oxidative and/or inflammatory damage. Moreover, the involvement of this transporter in drug interactions and delivery has been well clarified, even though the exact profile of the transported/interacting molecules is still somehow confusing. Therefore, OCTN1 continues to be a hot topic in terms of its functional role and structure. This review focuses on the most recent advances on OCTN1 in terms of functional aspects, physiological roles, substrate specificity, drug interactions, tissue expression, and relationships with pathology.     

Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

Site‐Selectively Coated,Densely‐Packed Microprojection Array Patches for Targeted Delivery of Vaccines to Skin

Densely packed dry‐coated microprojections are shown to deliver vaccines to targeted locations within the skin that are rich in immune cells, thus inducing protective immune responses against a lethal virus challenge. Selectively limiting the antigen coating to the tips of the projections, which penetrate the skin, would significantly reduce the amount of vaccine required in immunization. In this paper a simple technique, dip‐coating the microprojections, is introduced to meet this goal. By increasing the coating solution viscosity, an otherwise strong capillary action is mitigated and the desired controlled coating length on projections is achieved. Following application to the skin, most of the coated vaccine material is rapidly released from the projections (82.6% in mass within 2 min) to the target locations within the skin strata and a potent immune response is induced when a conventional influenza vaccine (Fluvax) is tested in a mouse model. The utility of this coating approach to a variety of molecules representative of vaccines (e.g., chicken egg ovalbumin (OVA) protein, DNA, and fluorescent dyes) is demonstrated. These collective attributes, together with the simplicity of the approach, position the dip‐coating method for practical utility in large vaccination campaigns.     

Copper Transfer from Cu–Aβ to Human Serum Albumin Inhibits Aggregation,Radical Production and Reduces Aβ Toxicity

Amyloid‐β peptides (Aβ) and the protein human serum albumin (HSA) interact in vivo. They are both localised in the blood plasma and in the cerebrospinal fluid. Among other functions, HSA is involved in the transport of the essential metal copper. Complexes between Aβ and copper ions have been proposed to be an aberrant interaction implicated in the development of Alzheimer's disease, where Cu is involved in Aβ aggregation and production of reactive oxygen species (ROS). In the present work, we studied copper‐exchange reaction between Aβ and HSA or the tetrapeptide DAHK (N‐terminal Cu‐binding domain of HSA) and the consequence of this exchange on Aβ‐induced ROS production and cell toxicity. The following results were obtained: 1) HSA and DAHK removed Cu^II from Aβ rapidly and stoichiometrically, 2) HSA and DAHK were able to decrease Cu‐induced aggregation of Aβ, 3) HSA and DAHK suppressed the catalytic HO^. production in vitro and ROS production in neuroblastoma cells generated by Cu–Aβ and ascorbate, 4) HSA and DAHK were able to rescue these cells from the toxicity of Cu–Aβ with ascorbate, 5) DAHK was more potent in ROS suppression and restoration of neuroblastoma cell viability than HSA, in correlation with an easier reduction of Cu^II–HSA than Cu–DAHK by ascorbate, in vitro. Our data suggest that HSA is able to decrease aberrant Cu^II–Aβ interaction. The repercussion of the competition between HSA and Aβ to bind Cu in the blood and brain and its relation to Alzheimer's disease are discussed.     

Proton binding onto soil by nonelectrostatic models: isolation and identification of mineral contributions

In this paper a methodological approach is proposed to validate mechanistic modeling for proton binding onto active sites of mineral and soil samples by reducing the uncertainty and arbitrariness of model schematization. This approach is based on the quantitative formulation (X-ray calibration method) of a simulating mineral mixture (SMM) accounting for the main mineral phases in the soil (quartz, goethite, hematite, muscovite, clinochlore). Mineral and organic contributions were separated by comparing titration curves of river sediment and SMM. Specific mineral contributions to the acid properties of SMM were separated by comparing titration models of SMM and single minerals. Different nonelectrostatic models were used for titrations of SMM and single minerals: two-site/three-KH models (one amphoteric plus one monoprotic site) for clay minerals and SMM; one-site/two-KH models (one amphoteric site) for goethite and hematite; and a one-site/one-KH model (one monoprotic site) for quartz. Crossed-comparisons of titration models allow for identifying and quantifying the specific contributions of the distinct edge hydroxyl groups of iron oxides, clay minerals, and quartz in the different pH ranges. In particularthe amphoteric sites of aluminosilicates mainly contribute in the acid-neutral pH range, the amphoteric sites of iron oxides take part in the neutral-basic range, and finally the monoprotic edge hydroxyl groups of quartz react in the upper basic region of pH. The good simulation of the acid-base properties of SMM (according to single mineral titration models and quantitative composition by X-ray) confirms both model schematization and SMM formulation. Speciation diagrams of the active sites of the different mineral components (aluminosilicates, iron oxides, and quartz) were obtained by implementing the database of a dedicated software with the apparent equilibrium constants regressed by titration modeling of single minerals.     

Storage stability of liver oil from two ray (Rhinoptera bonasus and Aetobatus narinari) species from the Gulf of Mexico

The effect of storage time on the quality of liver oil from two commercial rajiform species (Rhinoptera bonasus and Aetobatus narinari) captured in the Gulf of Mexico (State of Campeche coast line) was evaluated. Oil characterisation was conducted by physical (specific gravity, saponification index and water content) and chemical analyses (fatty acid content, carotenes and tocopherols) whilst storage stability (peroxide value, free fatty acids, conjugated dienes, anisidine value and changes in docosahexaenoic acid, DHA and content) was studied for 87 days at 25 °C. Increases (p < 0.05) in free fatty acids, conjugated dienes, peroxide value and anisidine value, and a decrease (p < 0.05) in DHA were observed during the storage time for both oil species as oxidation proceeded. It was concluded that R. bonasus and A. narinari oils lasted for 52 and 66 days under these storage conditions, respectively.