Comparison of bioactive phytochemical content and release of isothiocyanates in selected brassica sprouts

The consumption of brassica sprouts as raw vegetables provides a fair amount of glucosinolates (GLs) and active plant myrosinase, which enables the breakdown of GLs into health-promoting isothiocyanates (ITCs). This study reports the determination of the main constituents related to human health found in edible sprouts of two Brassica oleracea varieties, broccoli and Tuscan black kale, and two Raphanus sativus varieties, Daikon and Sango. Radish sprouts exhibited the highest ability to produce ITCs, with Daikon showing the greatest level of conversion of GLs into bioactive ITCs (96.5%), followed by Sango (90.0%). Tuscan black kale gave a value of 68.5%, whereas broccoli displayed the lowest with 18.7%. ITCs were not the exclusive GL breakdown products in the two B. oleracea varieties, since nitriles were also produced, thus accounting for the lower conversion observed. Measuring the release of plant ITCs is a valuable tool in predicting the potential level of exposure to these bioactive compounds after the consumption of raw brassica sprouts.     

Changes in selected biochemical and sensory parameters as affected by the superficial inoculation of Penicillium camemberti on dry fermented sausages

An atoxigenic strain of Penicillium camemberti was superficially inoculated on fermented sausages in an attempt to improve their sensory properties. The growth of this mould on the surface of the sausages resulted in an intense proteolysis and lipolysis, which caused an increase in the concentration of free amino acids, free fatty acids (FFA) and volatile compounds. Many of these were derived from amino acid catabolism and were responsible for the "ripened flavour", i.e. branched aldehydes and the corresponding alcohols, acids and esters. The development of the fungal mycelia on the surface of the sausages also protected lipids from oxidation, resulting in both lower 2-thiobarbituric acid (TBARS) values and lipid oxidation-derived compounds, such as aliphatic aldehydes and alcohols. The sensory analysis of superficially inoculated sausages showed clear improvements in odour and flavour and, as a consequence, in the overall quality of the sausages. Therefore, this strain is proposed as a potential starter culture for dry fermented sausage production.     

Electrochemical behaviour of titanium in fluoride-containing saliva

The effect of fluoride on the electrochemical behaviour of titanium was studied. Open circuit potentials, breakdown potentials (E _b) and potentiostatic transient currents were measured in synthetic salivas of different compositions. Optical and scanning electron microscopic observations were also made. Results show that the growth rate of Ti oxide layer is affected by fluoride anions and tensile stresses are developed. The OCP/time relationship of Ti immersed in salivas A and B obeys a logarithmic law which depends on the saliva composition. The E _b value is influenced by the thickness of the oxide layer, by the composition of the saliva (including fluoride concentration), and by the technique utilised for its evaluation. Thus, results reported in the literature, which seem to be contradictory, could be explained taking into account the experimental conditions assayed. A careful control of the titanium-containing dental materials should be made after long treatments with fluoride-containing prophylactic products or when fluoride-releasing restorative materials are present in the vicinity.     

Experimental Evaluation of Thermal Properties of Grouting Materials

This study is aimed at the thermal analysis of sealant mortar （usually a mixtures of bentonite and cemem with addition of sand） used in geothermal cooling and heating. In particular, thermal conductivity and diffusivity measurements were performed on differem sealant mixtures by using Hot Disk thermal constants analyzer in order to identify the interesting thermal properties of grouting materials. The grouting materials that we considered are of porous nature and, if used in the presence of groundwater, have different levels of imbibitions. It is important to know the thermal behavior of these materials at different water content. A first set of measurements was performed on a not-tinted material at room temperature; then the samples were led to saturation conditions by contact capillary imbibitions with a cotton wool layer moistened in water. The determination of thermal conductivity in these test conditions appears to be critical compared to the measuremems on non-timed sample. The thermal conductivity tests have revealed how the thermal behavior of the samples analyzed is essentially determined by the density and water content of the material： in fact, the thermal conductivity increases of two to three times the value of the not-tinted material.     

Discovery of a Short‐Chain Dehydrogenase from Catharanthus roseus that Produces a New Monoterpene Indole Alkaloid

Plant monoterpene indole alkaloids, a large class of natural products, derive from the biosynthetic intermediate strictosidine aglycone. Strictosidine aglycone, which can exist as a variety of isomers, can be reduced to form numerous different structures. We have discovered a short‐chain alcohol dehydrogenase (SDR) from plant producers of monoterpene indole alkaloids (Catharanthus roseus and Rauvolfia serpentina) that reduce strictosidine aglycone and produce an alkaloid that does not correspond to any previously reported compound. Here we report the structural characterization of this product, which we have named vitrosamine, as well as the crystal structure of the SDR. This discovery highlights the structural versatility of the strictosidine aglycone biosynthetic intermediate and expands the range of enzymatic reactions that SDRs can catalyse. This discovery further highlights how a sequence‐based gene mining discovery approach in plants can reveal cryptic chemistry that would not be uncovered by classical natural product chemistry approaches.     

Evaluation of Cell Migration and Cytokines Expression Changes under the Radiofrequency Electromagnetic Field on Wound Healing In Vitro Model

Wound healing (WH) proceeds through four distinct phases: hemostasis, inflammation, proliferation, and remodeling. Impaired WH may be the consequence of the alteration of one of these phases and represents a significant health and economic burden to millions of individuals. Thus, new therapeutic strategies are the topics of intense research worldwide. Although radiofrequency electromagnetic field (RF-EMF) has many medical applications in rehabilitation, pain associated with musculoskeletal disorders, and degenerative joint disorders, its impact on WH is not fully understood. The process of WH begins just after injury and continues during the inflammatory and proliferative phases. A thorough understanding of the mechanisms by which RF-EMF can improve WH is required before it can be used as a non-invasive, inexpensive, and easily self-applicable therapeutic strategy. Thus, the aim of this study is to explore the therapeutic potential of different exposure setups of RF-EMF to drive faster healing, evaluating the keratinocytes migration, cytokines, and matrix metalloproteinases (MMPs) expression. The results showed that RF-EMF treatment promotes keratinocytes’ migration and regulates the expression of genes involved in healing, such as MMPs, tissue inhibitors of metalloproteinases, and pro/anti-inflammatory cytokines, to improve WH.     

High Performance, Low-Dose Radiography Systems for Space and Remote Site Applications

Medical imaging applications using X- and gamma-rays have reached outstanding levels of complexity and performance, thanks to technology achievements in the fields of radiography, tomography and high resolution synchrotron devices. The operability of the related instrumentation resides in the availability of highly qualified specialists, as well as of medical doctors for diagnoses and treatment. This is a problem for personnel working in difficult ambient conditions as can be found in remote sites like Arctica, Antarctica and under-populated, desolated or mountainous regions on Earth. Astronauts, during long permanence at the Space Station or on future mission to Mars are potentially subject to risks such as traumas, fractures or diseases which would require semi-automated, easy-to-handle application of X-ray radiographic devices. For this purpose, the possible use of imaging instrumentation based on solid state detectors is discussed with special regard to CdZnTe pixel devices, now available with sub-mm resolution. The use of these semiconductor detectors will also allow to perform image diagnostics at much lower doses compared to the current plate-based radiographic techniques.