Effect of Boron Addition on Micro-Aluminum-Particle-Based Multifunctional High-Temperature Coatings

A novel coating concept for high temperature protection based on spherical micro-sized aluminum particles in combination with boron micro-particles has been developed and investigated. Fractions of 10–20 % boron micro-particles were added to slurries of spherical micro-sized Al, and deposited by brushing on the surface of the austenitic steel alloy 321. A single-sized 3–5 μm Al and a multi sized 1–20 μm Al powder were used. After a heat treatment of 5 h at 650 °C, a homogeneous diffusion layer was formed in the substrate as well as an adherent topcoat. The latter consisted of sintered hollow alumina spheres, which has the potential to provide thermal barrier effect by gas phase insulation. The results from exposure experiments up to 3,000 h show that for the 1–20 μm Al particles, the addition of boron yields topcoats with improved adherence, higher stability and resistance to high temperatures, as well as an outstanding sintering degree. Nano-sized whiskers of Al₄B₂O₉ were observed on the surface of the Al₂O₃ particles when boron was added. The formation mechanism of the borate was studied in situ by high temperature X-ray diffraction.     

Effect of olive fruit freezing on oxidative stability of virgin olive oil

Several studies have suggested that the phenolic fraction plays an important role during storage and therefore in the shelf life of virgin olive oil. This investigation examines the effect of freezing olives (–18 °C) before processing into oil on the transfer of the phenolic compounds into the subsequent oil, and the consequential changes in oxidative stability. Oil samples obtained from frozen olives (24 h at –18 °C), crushed with and without preliminary thawing, were compared to a control sample; both oils were obtained using a two‐phase low‐scale mill. The oxidative stability in different samples was assessed in terms of primary and secondary oxidation products as measured by peroxide values and oxidative stability index times, respectively. The quality of the oil samples was also checked through the percentage of free acidity and the phenolic content. Phenols were determined by both spectrophotometric assays (total phenols and o‐diphenols) and HPLC‐DAD/MSD. The antiradical capacity of the phenolic fraction was determined by DPPH and ABTS spectrophotometric tests. These analyses showed that thawing of olives before oil extraction led to a significant loss of oxidative stability and phenols; in contrast, samples obtained from frozen olives that were not thawed before crushing showed qualitative characteristics similar to control samples.     

Rapid FTIR determination of water,phenolics and antioxidant activity of olive oil

A rapid Fourier transformed infrared (FTIR) attenuated total reflectance (ATR) spectroscopic method was applied to the determination of water content (WC), total phenol amount (TP) and antioxidant activity (ABTS ^{. +}) of virgin olive oils (VOO) and olive oils. Calibration models were constructed using partial least squares regression. Oil samples with WC ranging from 289 to 1402 mg water/kg oil, with TP from 46 to 877 mg gallic acid/kg oil and with ABTS ^{. +} from 0 to 5.7 mmol Trolox/kg oil were considered for chemometric analysis. Better results were obtained when selecting suitable spectral ranges; in particular, from 2260 to 1008 cm^?1 for WC, from 3610 to 816 cm^?1 for TP and from 3707 to 1105 cm^?1 for ABTS ^{. +}. Satisfactory LOD values by the FTIR‐chemometric methods were achieved: 9.4 (mg/kg oil) for WC; 12.5 (mg gallic acid/kg oil) for TP, and 0.76 (mmol Trolox/kg oil) for ABTS ^{. +}. The evaluation of the applicability of these analytical approaches was tested by use of validation sample sets (n = 16 for WC, n = 11 for TP and n = 14 for ABTS) with nearly quantitative recovery rates (99–114%). The FTIR–ATR method provided results that were comparable to conventional procedures. Practical applications : The presented method is based on ATR–FTIR in combination with multivariate calibration methodologies and permits a simultaneous evaluation of important quality parameters of VOO (WC, TP and ABTS ^{. +}). This approach represents an easy and convenient means for monitoring olive oil quality with the advantage of ease of operation, speed, no sample pretreatment and no consumption of solvents. The data obtained with this method are comparable to those obtained using the official reference method. Therefore, the technique is highly plausible as an alternative to the standard procedure for routine analysis or control at‐line of production processes.     

Crystallization kinetics of cis‐1,4‐polybutadiene

The isothermal and nonisothermal crystallization kinetics of cis‐1,4‐polybutadiene has been investigated with respect to the content of cis units and the linearity of the main chain. The rate of spherulite growth increases with chain regularity as the presence of branches as well as segments with different configurations slows the crystallization rate. The major parameter that determines the crystallization rate is the presence in the formulation of heterogeneities that favor the formation of primary nuclei and determine an anticipated onset of crystallization. As the activity of the heterogeneous nuclei depends more on the type and number of foreign particle than on any chain parameter, no straightforward information on the influence of the chain structure on the crystallization rate can be derived by mere calorimetric analysis, at least for analyzed samples. It is only with combined analysis by optical microscopy that comprehensive information on the crystallization kinetics of cis‐1,4‐polybutadiene can be derived. The results reported in this contribution point out the importance, in polymer science, of preferring complementary instrumentation and not limiting experimental investigations to a single technique of analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Corrosion behaviour of sol–gel treated and painted AA2024 aluminium alloy

Design, development and scale-up of environmentally friendly coatings are very important in order to replace chromate based coatings for aluminium alloys. Barrier properties, paint adhesion and possibly self-healing ability are relevant aspects for replacement of chromate-based pre-treatments. Sol–gel materials are candidates for use in protective coating applications, as it is possible to form highly adherent and chemically inert oxide films on metal substrates.     

Application of a spectroscopic method to estimate the olive oil oxidative status

A rapid Fourier transformed infrared (FTIR) attenuated total reflectance (ATR) spectroscopic method coupled with partial least squares (PLS), was developed to estimate the oxidation degree of extra virgin olive oil (EVOO). The reference values of EVOO oxidation for the FTIR calibration were obtained by the specific absorptions at 232 and 270 nm, due to the presence of conjugated diene (CD) and conjugated triene (CT) groups, as monitored by the UV spectrophotometric determination. Specific washing procedures were applied to the EVOO to obtain EVOOP and EVOOTP samples, without phenolic compounds and without tocopherols and phenols, respectively. To obtain different oxidation degrees covering wide CD and CT ranges, EVOO, EVOOP, and EVOOTP samples were subjected to a forced oxidation at 60°C for 20 days and aliquots of the oils were daily analyzed. Regression of the FTIR/PLS‐predicted CD and CT of individual oxidized oils EVOO, EVOOP, EVOOTP, and all combined oils (EVOOALL) against UV–Visible reference values demonstrated the good quality of the models in terms of R² and RMSECV values. The results of the study indicated that a strong correlation existed between FTIR and UV–Visible peak intensities. Practical applications: The FTIR‐ATR method coupled with PLS elaboration was developed and applied to predict the oxidation degree of EVOO samples with considerable advantages in terms of simplicity, analysis time, and solvent consumption as compared to the standard method. Moreover, suitable adjustments of the equipment could permit a rapid control at‐line in oil sector.     

Double Mutant Cycles as a Tool to Address Folding,Binding, and Allostery

Quantitative measurement of intramolecular and intermolecular interactions in protein structure is an elusive task, not easy to address experimentally. The phenomenon denoted ‘energetic coupling’ describes short- and long-range interactions between two residues in a protein system. A powerful method to identify and quantitatively characterize long-range interactions and allosteric networks in proteins or protein–ligand complexes is called double-mutant cycles analysis. In this review we describe the thermodynamic principles and basic equations that underlie the double mutant cycle methodology, its fields of application and latest employments, and caveats and pitfalls that the experimentalists must consider. In particular, we show how double mutant cycles can be a powerful tool to investigate allosteric mechanisms in protein binding reactions as well as elusive states in protein folding pathways.     

Functional Inactivation of Drosophila GCK Orthologs Causes Genomic Instability and Oxidative Stress in a Fly Model of MODY-2

Maturity-onset diabetes of the young (MODY) type 2 is caused by heterozygous inactivating mutations in the gene encoding glucokinase (GCK), a pivotal enzyme for glucose homeostasis. In the pancreas GCK regulates insulin secretion, while in the liver it promotes glucose utilization and storage. We showed that silencing the Drosophila GCK orthologs Hex-A and Hex-C results in a MODY-2-like hyperglycemia. Targeted knock-down revealed that Hex-A is expressed in insulin producing cells (IPCs) whereas Hex-C is specifically expressed in the fat body. We showed that Hex-A is essential for insulin secretion and it is required for Hex-C expression. Reduced levels of either Hex-A or Hex-C resulted in chromosome aberrations (CABs), together with an increased production of advanced glycation end-products (AGEs) and reactive oxygen species (ROS). This result suggests that CABs, in GCK depleted cells, are likely due to hyperglycemia, which produces oxidative stress through AGE metabolism. In agreement with this hypothesis, treating GCK-depleted larvae with the antioxidant vitamin B6 rescued CABs, whereas the treatment with a B6 inhibitor enhanced genomic instability. Although MODY-2 rarely produces complications, our data revealed the possibility that MODY-2 impacts genome integrity.     

Extraction and characterization of hydroxyapatite-based materials from grey triggerfish skin and black scabbardfish bones

The conversion of food industry by-products to compounds with high added value is nowadays a significant topic, for social, environmental, and economic reasons. In this paper, calcium phosphate-based materials were obtained from black scabbardfish (Aphanopus carbo) bones and grey triggerfish (Balistes capriscus) skin, which are two of the most abundant fish by-products of Madeira Island. Different calcination temperatures between 400 and 1000°C were employed. Materials obtained from calcination of bones of black scabbard fish were composed by homogeneous mixtures of hydroxyapatite (Ca₁₀(PO4)₆(OH)₂, HAp) and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP). Because of the high biocompatibility of HAp and the good resorbability of β-TCP, these natural biphasic materials could be very relevant in the field of biomaterials, as bone grafts. The ratio between HAp and β-TCP in the biphasic compound was dependent on the calcination temperature. Differently, the material obtained from skin of grey triggerfish contained HAp as the main phase, together with small amounts of other mineral phases, such as halite and rhenanite, which are known to enhance osteogenesis when used as bone substitutes. In both cases, the increase of calcination temperature led to an increase in the particles size with a consequent decrease in their specific surface area. These results demonstrate that from the fish by-products of the most consumed fishes in Madeira Island it is possible to obtain bioceramic materials with tunable composition and particle morphology, which could be promising materials for the biomedical field.