A 3D oxalate-bridged [CuIIFeII] coordination polymer as molecular precursor for CuFe2O4 spinel—photocatalytic features

A 3D heterometallic oxalate-bridged coordination polymer [Cu^IIFe^II₂(H₂O)(terpy)(C₂O₄)₃]_n (terpy = 2,2′:6′,2″-terpyridine) ( 1 ) was investigated both as photocatalyst for the organic dye removal and as a single-source precursor for the preparation of the copper ferrite (CuFe₂O₄) nanocrystals by thermal processing. The dual functionality of 1 was supported by the degradation of aqueous solutions of rhodamine B (RhB) and methylene blue (MB) solutions under visible (Vis) and ultraviolet (UV) light irradiation, powder X-ray diffraction data collection at room temperature, and the optical and scanning electron microscopy analyses. A close inspection of the X-ray diffraction patterns unveiled qualitative and quantitative information on the phase composition obtained after the single-source molecular precursor route to spinel oxide. By optimizing the temperature levels and setting the controlled heating rate at 6 h of holding time, the phase composition of thermal processing of 1 was evaluated—thermal treatment of 1 at 950°C for 6 h and a heating/cooling rate of 10°C min⁻¹ resulted in the formation of solely tetragonal spinel phase of CuFe₂O₄, whereas the formation of both tetragonal and cubic CuFe₂O₄ phases was observed at 950°C by the heating rate of 30°C min⁻¹. To obtain the high-temperature cubic CuFe₂O₄ oxide, compound 1 was heated and then quenched at 925°C, which led to the formation of the cubic spinel ferrite as the main crystalline oxide phase. Moreover, the photocatalytic properties of the t-CuFe₂O₄ spinel were investigated under the same conditions as for 1 . The optical bandgap energies were estimated from UV–Vis absorption spectra for both metal oxide and precursor powder.     

Stability of a chitosan layer deposited onto a polyethylene surface

A two‐step procedure was applied to obtain antimicrobial films; this procedure involved a corona treatment of the polyethylene (PE) surface and its chemical activation with 1‐ethyl‐3‐[3‐dimethylaminopropyl] carbodiimide hydrochloride and N‐hydroxysuccinimide, and this led to the covalent bonding of chitosan on the PE surface. Electrochemical methods were used to investigate the stability of the deposited chitosan layer. The potentiometric and polyelectrolyte titrations showed that some amount of chitosan desorbed faster from the surface until equilibrium was reached and also that the grafted chitosan layer was more stable than the physically adsorbed one. The chitosan immobilized on the PE surface exhibited the expected antibacterial activity when tested against three bacteria, which included two Gram‐negative bacteria, Salmonella enteritidis and Escherichia coli, and one Gram‐positive bacterium, Listeria monocytogenes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2444–2457, 2013     

Structural Study of the Partially Disordered Full‐Length δ Subunit of RNA Polymerase from Bacillus subtilis

The partially disordered δ subunit of RNA polymerase was studied by various NMR techniques. The structure of the well‐folded N‐terminal domain was determined based on inter‐proton distances in NOESY spectra. The obtained structural model was compared to the previously determined structure of a truncated construct (lacking the C‐terminal domain). Only marginal differences were identified, thus indicating that the first structural model was not significantly compromised by the absence of the C‐terminal domain. Various ¹⁵N relaxation experiments were employed to describe the flexibility of both domains. The relaxation data revealed that the C‐terminal domain is more flexible, but its flexibility is not uniform. By using paramagnetic labels, transient contacts of the C‐terminal tail with the N‐terminal domain and with itself were identified. A propensity of the C‐terminal domain to form β‐type structures was obtained by chemical shift analysis. Comparison with the paramagnetic relaxation enhancement indicated a well‐balanced interplay of repulsive and attractive electrostatic interactions governing the conformational behavior of the C‐terminal domain. The results showed that the δ subunit consists of a well‐ordered N‐terminal domain and a flexible C‐terminal domain that exhibits a complex hierarchy of partial ordering.     

Dewetting and Adsorption in Homopolymer Films Containing Triblock Copolymers: Role of Chain Architecture and Anchoring Block Molar Fraction

Triblock copolymer additives are found to stabilize thin-film dewetting of B-type homopolymers with degree of polymerization (DOP) P deposited on silicon oxide. The triblock copolymers’ architectures are ABA and BAB, where A and B represent anchoring and nonadsorbing blocks with DOP's N _A and N _B, respectively. Upon adding 1 vol.% of the ABA additive, dewetting is only observed for anchoring block molar fractions, f _A, below 4%. Dewetting is arrested in films containing 1 vol.% ABA, BAB, or AB that have similar values of f _A ～ 8%, showing that chain architecture is not the only indicator of a successful additive. Compared with films containing diblock copolymers, the interfacial excess, z*, of triblock copolymers at the melt/substrate interface is relatively small as measured by low-energy forward-recoil spectrometry. Because adsorbed copolymers can reduce the capillary driving force for dewetting and participate in entanglements with matrix chains, the higher coverage and grafting density observed for diblock copolymers suggests that diblocks are more effective than triblocks in improving thin-film stability.     

Spray-dried nanoparticle-loaded pectin microspheres for dexamethasone nasal delivery

Abstract

In this study, we present the development of an innovative dry powder dexamethasone (Dex) nasal delivery system comprising Dex-loaded lipid/alginate nanoparticles incorporated within pectin microspheres (Dex/NPs-loaded pectin microspheres; DNM). DNM microspheres were characterized by the mean diameter of 2.76?±?0.10?µm, zeta-potential of –36.2?±?1.1?mV, and drug loading of 3.3?±?0.3%. The morphology study revealed irregular microsphere surface forming external voids. In contact with simulated nasal fluid, DNM microspheres demonstrated desirable property of moderate swelling and ensured stronger mucoadhesion compared with conventional Dex-loaded pectin microspheres. The strategy of Dex incorporation within the lipid/alginate NPs resulted in prolonged Dex release in relation to Dex being directly entrapped within the conventional pectin microspheres. DNM microspheres showed excellent biocompatibility and rendered Dex permeation across the selected epithelial cell model similar to that of Dex solution. In conclusion, balanced biopharmaceutical properties of the proposed nasal Dex delivery system provides the potential for prolonged contact time with nasal mucosa, prolonged therapeutic effect, and improved patient compliance.     

Application of Modified Lignosulfonates in Adhesives for Insulation Board Manufacture Based on Mineral Wool

Extensive laboratory investigations and mill scale trials confirmed the applicability of ultrafiltrated high molecular weight Ca-ligno-sulfonates in adhesive composition with phenolic resin for insulation board manufacture based on mineral wool. Insulation materials produced with adhesive components with a formulation of lignosulfonate/PF resin between 10/90 and 30/70 have appropriate technical and commercial properties.     

Assessing Optical Properties and Refractive Index of Combustion Aerosol Particles Through Combined Experimental and Modeling Studies

The variability of optical properties of combustion particles generated from a propane diffusion flame under varying fuel-to-air (C/O) ratios was studied with a three-wavelength nephelometer, a particle soot absorption photometer, and an integrating sphere photometer. Information on particle size distribution, morphology, and elemental carbon to total carbon (EC/TC) ratios were obtained from scanning mobility particle sizer measurements, transmission electron microscopy analyses, and thermal-optical analyses. Particles generated under a low C/O ratio (0.22) showed high elemental carbon fraction (EC/TC = 0.77) and low brown carbon to equivalent black carbon (BrC/EBC) ratio (0.01), and were aggregates composed of small primary particles. Rayleigh–Debye–Gans theory reproduced experimental single-scattering albedo, ω, absorption, and scattering Ångström exponents within 56, 3, and 18%, respectively. In contrast, particles produced under a high C/O ratio (0.60) showed low elemental carbon fraction (EC/TC = 0.09) and high BrC/EBC ratio >100, and were smaller and spherical in shape. Their optical properties were better modeled with Mie theory. By minimizing the difference between calculated and measured ω and Ångström exponents, refractive indices of OC at three visible wavelengths were deduced. Contrary to the widely accepted assumption that refractive index of BC is wavelength independent, BC-rich particles exhibited absorption Ångström exponent >1.0 which implies some degree of wavelength dependence.

Copyright 2015 American Association for Aerosol Research     

Thermodynamics of Nitric Acid Extraction with Iso-Butanol. I. Water Activity In Iso-Butanol

A numerical procedure was employed to evaluate hydrated water attached to the extractable nitric acid/iso-butanol complex. The hydratation number was found to be 11, a value favourable in comparison to the hydratation numbers published for straight chain alcohols extractants. Of several tested approaches, the fourth order interaction Scatchard equation offers water activity coefficients in the alcohol phase which are in close agreement with the measured ones.