Tau Exon 10 Inclusion by PrPC through Downregulating GSK3β Activity

Tau protein is largely responsible for tauopathies, including Alzheimer’s disease (AD), where it accumulates in the brain as insoluble aggregates. Tau mRNA is regulated by alternative splicing, and inclusion or exclusion of exon 10 gives rise to the 3R and 4R isoforms respectively, whose balance is physiologically regulated. In this sense, one of the several factors that regulate alternative splicing of tau is GSK3β, whose activity is inhibited by the cellular prion protein (PrP^C), which has different physiological functions in neuroprotection and neuronal differentiation. Moreover, a relationship between PrP^C and tau expression levels has been reported during AD evolution. For this reason, in this study we aimed to analyze the role of PrP^C and the implication of GSK3β in the regulation of tau exon 10 alternative splicing. We used AD human samples and mouse models of PrP^C ablation and tau overexpression. In addition, we used primary neuronal cultures to develop functional studies. Our results revealed a paralleled association between PrP^C expression and tau 4R isoforms in all models analyzed. In this sense, reduction or ablation of PrP^C levels induces an increase in tau 3R/4R balance. More relevantly, our data points to GSK3β activity downstream from PrP^C in this phenomenon. Our results indicate that PrP^C plays a role in tau exon 10 inclusion through the inhibitory capacity of GSK3β.     

负荷功率模型的最优特征选择研究

负荷功率呈现时空多样的变化特性,其影响因素众多,构建负荷功率模型的关键之一是确定模型的输入特征量。文中着重研究短期负荷功率模型的特征选择,旨在从历史负荷、气象、日期等众多特征中选出最优特征集。首先,采用最大信息系数、基于支持向量机的递归特征消除法和随机森林3种不同特征选择方法分别对输入特征集进行选择;然后,根据对比分析结果提出基于遗传算法的最优特征集搜索策略,选定XGBoost预测模型的误差指标作为适应性函数进行迭代优化搜索;最终,确定负荷功率模型的最优特征输入集。采用某地区220 kV变电站母线负荷数据进行算例分析,对比各方法所选特征集作为功率模型输入得到的负荷预测效果,验证了文中方法的有效性和准确性。     

A Facile Approach toward Thermoplastic Triple-Shape Memory Polymers

In this work, a ternary blend of polyolefin elastomer (POE), lauric acid (LA), and poly(ε-caprolactone) (PCL) with triple-shape memory effect (triple-SME) is reported. LA and PCL exhibit distinct thermal transitions and construct two reversible switching networks capable of fixing and releasing different temporary shapes under a mild condition. The ternary blend shows excellent triple-shape memory properties and good toughness. Besides, the permanent shape can be reconfigured by a simple thermal treatment. These particular features make the novel blend a competitive candidate for diverse applications. And the creative combination of crystalline small molecule and semicrystalline polymer expands the freedom for producing triple-shape memory polymers (triple-SMPs).     

A Dual Physical Cross-Linking Strategy to Construct Tough Hydrogels with High Strength,Excellent Fatigue Resistance,and Stretching-Induced Strengthening Effect

Hydrogels with excellent stiffness, toughness, anti-fatigue, and self-recovery properties are regarded as promising water-containing materials. In this work, a dual physically cross-linked (DPC) sodium alginate (SA)/poly[acrylamide (AAm)-acrylic acid (AAc)-octadecyl methacrylate (OMA)]-Fe³⁺ hydrogel is reported, which is constructed by hydrophobic association (HA) and ionic coordination (IC). The optimal DPC hydrogel demonstrates excellent mechanical performance: tensile modulus of 0.65 MPa, tensile strength of 3.31 MPa, elongation at break of 1547%, and toughness of 27.8 MJ m^–3. SA/P(AAm-AAc-OMA)-Fe³⁺ DPC hydrogels also exhibit prominent anti-fatigue and self-recovery performance (99.1–109.7% modulus recovery and 90.4–108.9% dissipated energy recovery after resting for 5 min without additional stimuli at ambient temperature) through the reconstruction of reversible physical cross-linking. Some of the SA/P(AAm-AAc-OMA)-Fe³⁺ DPC hydrogels even exhibit a stretching-induced strengthening effect, which is similar to the performance of muscle—“the more training, the more strength.” Hence, the combination of HA and IC will provide an effective approach to design DPC hydrogels with desirable mechanical performances and a longer service life for wider applications of soft materials.     

Genetic Susceptibility to Periodontal Disease in Down Syndrome: A Case-Control Study

Severe periodontitis is prevalent in Down syndrome (DS). This study aimed to identify genetic variations associated with periodontitis in individuals with DS. The study group was distributed into DS patients with periodontitis (n = 50) and DS patients with healthy periodontium (n = 36). All samples were genotyped with the “Axiom Spanish Biobank” array, which contains 757,836 markers. An association analysis at the individual marker level using logistic regression, as well as at the gene level applying the sequence kernel association test (SKAT) was performed. The most significant genes were included in a pathway analysis using the free DAVID software. C12orf74 (rs4315121, p = 9.85 × 10⁻⁵, OR = 8.84), LOC101930064 (rs4814890, p = 9.61 × 10⁻⁵, OR = 0.13), KBTBD12 (rs1549874, p = 8.27 × 10⁻⁵, OR = 0.08), PIWIL1 (rs11060842, p = 7.82 × 10⁻⁵, OR = 9.05) and C16orf82 (rs62030877, p = 8.92 × 10⁻⁵, OR = 0.14) showed a higher probability in the individual analysis. The analysis at the gene level highlighted PIWIL, MIR9-2, LHCGR, TPR and BCR. At the signaling pathway level, PI3K-Akt, long-term depression and FoxO achieved nominal significance (p = 1.3 × 10⁻², p = 5.1 × 10⁻³, p = 1.2 × 10⁻², respectively). In summary, various metabolic pathways are involved in the pathogenesis of periodontitis in DS, including PI3K-Akt, which regulates cell proliferation and inflammatory response.     

Natural Polysaccharides as Multifunctional Components for One-Step 3D Printing Tough Hydrogels

Natural polysaccharides (NPS) are regarded as biomolecular and structural components for preparing high-performance tough hydrogels. But the one-step fabrication of NPS-containing hydrogels in seconds and the template-free design of complicated high-resolution structures are still significant challenges in this field. To meet these requirements, various NPS-containing tough hydrogels are fabricated and processed into 2D/3D structures via the combination of Ru(bpy)₃²⁺-mediated photochemistry and extrusion 3D printing technique. The whole fabrication process is one-step, completed in tens of seconds under visible light irradiation. It is found that the used NPS plays a key role in achieving the fabrication of high-performance structured tough hydrogels. The high reactivity of functional groups in the used NPS can shorten their gelation times. Long rigid chains of the used NPS, their hierarchical assemblies, and contrasting multinetworks benefit from the efficient dissipation of mechanical energy and enhancement of its operational stability. Strong supramolecular interactions enable hydrogel precursors to have high viscosities, therefore providing good controllability to design high-resolution and complicated tough hydrogel structures via extrusion 3D printing. It is anticipated that this straightforward fabrication strategy and findings will open new horizons for NPS-containing materials.     

The effect of heat treatment on tensile properties of 2D C/SiC composites

Two-dimensional (2D) carbon fiber reinforced silicon carbide (C/SiC) composites with different initial strength were prepared by chemical vapor infiltration (CVI). After tensile property testing, results exhibited that as the heat-treatment temperature (HTT) increases to 1900°C, the tensile strength and toughness of the low strength specimen (LSS) increased by 110% and 530%, while the high strength specimen (HSS) increased by 5.4% and 550%, respectively. As observed from morphologies, the heat treatment increases the graphitization of the amorphous PyC interphase, which leads to the weakening of interfacial bonding strength (IBS). Meanwhile, the defects arising from heat treatment cause thermal residual stress relaxation. Therefore, the tensile strength and toughness of LSS with relatively high initial IBS increase significantly as HTT increases. For HSS with moderate initial IBS, the heat treatment slightly improves the tensile strength, but significantly improves the toughness. Consequently, the post-heat-treatment tensile properties of 2D C/SiC composites can be regulated by varying HTTs and different initial strength.     

Microstructural evolution and interfacial reactions between Ti and ZrO2/CaTiO3 composites

Various proportions of ZrO₂/CaTiO₃ powders were mixed and hot pressed at 1500°C/30 min for Ti casting. The hot-pressed ZrO₂/CaTiO₃ composites were reacted with pure Ti at 1700°C/10 min in Ar. The interfacial reaction between Ti and ZrO₂/CaTiO₃ composites was investigated through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The ZrO₂/CaTiO₃ composites with less than 10 vol.%, CaTiO₃, and a minor amount of residual TiO₂ were found. When the content of ZrO₂ was increased to larger than 10 vol.%, two Ca₂Zr₅Ti₂O₁₆ and CaZrTi₂O₇ phases appeared in the composites. The amount of CaTiO₃ and CaZrTi₂O₇ in the composites gradually decreased as the amount of ZrO₂ increased. When Ti came in contact with ZrO₂/CaTiO₃ composites with less than 10 vol.% ZrO₂, the resulting eutectic reaction produced a liquid phase and induced melting. When ZrO₂ was increased to more than 30 vol.% in the composites, Ca₂Zr₅Ti₂O₁₆ and CaZrTi₂O₇ changed completely to CaZrO₃, Ti₂O, CaO, and ZrO₂. With more than 30 vol.% ZrO₂, no other reaction phases occurred in the Ti side after contact with the ZrO₂/CaTiO₃ composites, which is conducive for producing ceramic composites for Ti casting applications.     

Performance of Green Solvents in the Extraction of Sunflower Oil from Enzyme-Treated Collets

The main goal of this work is to evaluate the extraction of sunflower oil from enzyme-treated collets using ethanol and isopropanol (IPA) as solvents. The sunflower collets are pretreated with the multienzyme complex Viscozyme L prior to solvent extraction by the Soxhlet method. The influence of the moisture content of the collets, pretreatment, processing time, and solvent type on the amount of total extracted material and the oil extraction efficiency is studied. Some quality parameters such as phospholipid content of the oil and chlorogenic acid content of the residual meal are also analyzed. At low moisture content (7%) the solvents exhibit similar oil extraction ability (98–99%), but with increasing moisture the extraction efficiency of ethanol decreases to about 85%, while no significant differences are observed for IPA. The enzymatic treatment increases the extraction efficiency for all times, especially for ethanol. It is observed that IPA is more efficient in the extraction compared to ethanol, and the amount of nonlipid material is reduced by ≈70%. In addition, the oil extracted with IPA have lower phospholipid content and the residual meal presents a higher chlorogenic acid content. Practical Applications:This work would contribute toward the use of green solvents in the extraction of sunflower oil from collets. Ethanol and isopropanol, used as solvents, present attractive advantages, including low toxicity, good operational security, as well as being obtained from a renewable source. The obtained data provide up-to-date information on the use of these alcohols in the extraction of sunflower oil from collets and the influence of operating conditions, such as moisture content, enzymatic pretreatment of the collets, and the extraction time. Information about oil and meal quality is also reported.     

Effect of SiC nanowhisker addition on microstructure and mechanical properties of regenerated cemented carbides by low-pressure sintering

The hardness and toughness of regenerated cemented carbides, in general, are contradictory. Therefore, it is critical to explore regenerated cemented carbides with both high hardness and high toughness. In this study, regenerated WC-8-wt% Co cemented carbide with SiC nanowhisker were prepared by low-pressure sintering. The influence of SiCw contents on the microstructure and mechanical properties of regenerated WC-8-wt% Co cemented carbide was investigated. The results indicated that the hardness, density, flexural strength, and fracture toughness of regenerated cemented carbide first increased and then decreased with the addition of SiCw. The Vickers hardness, density, flexural strength, and fracture toughness could reach 1575 HV, 14.6 g/cm³, 2204 MPa, 16.85 MPa·m^1/2, respectively, with SiCw content 0.5 wt%, which were increased by 14.4%, 0.7%, 12.2%, and 17.3%, respectively, when compared with the regenerated cemented carbide without SiCw. The lowest friction coefficient and the best wear resistance could be also reached when 0.5-wt% SiCw was added. The fracture mechanism of the regenerated cemented carbide contained both transgranular and intergranular fracture through the microscopic observation of fracture surface via scanning electron microscope.