Effect of supports on the redox performance of pyrite cinder in chemical looping combustion

Chemical looping combustion (CLC) is a clean and efficient flame-free combustion technology,which combust the fuels by lattice oxygen from a solid oxygen carrier with inherent CO2 capture.The develop-ment of oxygen carriers with low cost and high redox performance is crucial to the whole efficiency of CLC process.As the solid by-product from the sulfuric acid production,pyrite cinder presented excellent redox performance as an oxygen carrier in CLC process.The main components in pyrite cinder are Fe2O3,CaSO4,Al2O3 and SiO2 in which Fe2O3 is the active component to provide lattice oxygen.In order to sys-tematic investigate the functions of supports (CaSO4,Al2O3 and SiO2) in pyrite cinder,three oxygen car-riers (Fe2O3-CaSO4,Fe2O3-Al2O3 and Fe2O3-SiO2) were prepared and evaluated in this study.The results showed that Fe2O3-CaSO4 displayed high redox activity and cycling stability in the multiple redox cycles.However,both Fe2O3-Al2O3 and Fe2O3-SiO2 experienced serious deactivation during redox reactions.It indicated that the inert Fe-Si solid solution (Fe2SiO4) was formed in the spent Fe2O3-SiO2 sample,which decreased the oxygen carrying capacity of this sample.The XPS results showed that the oxygen species on the surface of Fe2O3-CaSO4 could be fully recovered after the 20 redox cycles.It can be concluded that CaSO4 is the key to the high redox activity and cycling stability of pyrite cinder.     

The Synthesis of Covalent Triazine-Based Frameworks via Friedel–Crafts Reactions of Cyanuric Chloride with Thienyl and Carbazolyl Derivatives for Fluorescence Sensing to Picric Acid,Iodine and Capturing Iodine

A multifunctional thiophene-based covalent triazine framework (TTPATTh) with triphenylamine as core is synthesized by Friedel–Crafts reaction of cyanuric chloride with thienyl derivative for the first time. The yield of TTPATTh (99.59%) is far higher than that of the carbazole-based CTF (TTPATCz, 47.03%). TTPATTh and TTPATCz possess high BET surface areas with 1235 and 2501 m² g^–1 as well as high pore volumes with 1.60 and 2.23 cm³ g^–1, respectively. TTPATTh and TTPATCz have high thermal stability with high thermal decomposition temperatures of 514 and 598 °C in nitrogen atmosphere. With the introduction of triazine rings, the fluorescence sensing sensitivities of TTPATTh and TTPATCz to picric acid and iodine are improved significantly. Especially for TTPATTh, the K_sv values reach 5.95 × 10⁵ and 1.61 × 10⁴ L mol^–1, and LODs reach 1.02 × 10^–12 and 1.86 × 10^–12 mol L^–1. To the best of the knowledge, this is the most sensitive value among thiophene-based porous organic polymers to PA and I₂. Furthermore, TTPATTh and TTPATCz can also adsorb iodine in vapor phase, cyclohexane solution and aqueous solution, and release iodine by heating or in ethanol solution. The efficiency of controlling the release of iodine is higher than that in ethanol.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

Characterization of ultrafine La x Sr1−x MnO3 powder prepared by spray pyrolysis

The characterization of La _x Sr_1−x MnO₃ powders produced by spray pyrolysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observation, specific surface area (Brunauer-Emett-Teller), and particle size distribution measurements shows that the resultant large particles are loose agglomerates consisting of many small particles. However, the sintered tiny particles can form hard agglomerates, and the particle size increases remarkably. The structures of the powders before and after sintering were identified by x-ray diffraction (XRD). The study of the electrical property of the powder shows that the powder is a metallic conductor. In a reducing atmosphere, the powder can be decomposed. When the powder is cofired with yttria-stabilized zirconia 5% (YSZ) powder at 1200 °C for 5 h, no new phase is produced, and the powder remains a single provskite hexagonal-rhombohedral structure.     

稀土含量对喷熔层组织及耐蚀性的影响

本文通过在镍基自熔合金粉末中加入不同含量的稀土，研究了稀土含量对喷熔层组织及耐蚀性的影响规律及其作用机制。结果表明，在喷熔材料中加入适量稀土，可使喷熔层组织细化、晶界净化，从而使腐蚀过程中的表面活性点减少，耐蚀性提高。     

测定银的新催化分光光度法研究──藏红T－碘化钾指示反应体系

根据银对藏红Ｔ与碘离子氧化还原反应的催化作用，建立了一种测定微量银的动力学光度法。方法的线性范围为０．５～４．０μｇ／ｍｌ，检测限为０．０２μｇ／ｍｌ。除Ｈｇ２＋严重干扰，Ｆｅ３＋、Ｃｒ６＋有轻度干扰外，其余常见的离子不影响测定。与常见测定银的动力学法相比，本法反应速度很快，且所有测定均可在室温下进行。     

汽车后市场准入门槛亟需设防

任何市场都是有规则的,没有标准的市场是短暂的.经销商要有一个好的经营环境,必须把这个门槛设好. 汽车后市场还需要准入门槛? 李庆云现任天津环渤海汽车城董事长并身兼天津市交易市场协会会长,在没有跨进汽车行业之前,一直觉得这样的问题多余:哪个行业没有准入门槛?等自己在天津建立环渤海汽车城之后,才意识到,中国的汽车后市场是多么需要"设防".     

氰化氢在终冷塔中气液两相之间转移的研究

分析了煤气中氰化氢的形成,论述了氰化氢在煤气和其冷凝液中的平衡机理,讨论了影响氰化氢相平衡的因素,研究了直接终冷、间接终冷时煤气中氰化氢的转移情况。     

Properties of poly(n‐butyl methacrylate) prepared by reverse atom transfer radical polymerization in an aqueous dispersed system

Reverse atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) in waterborne media using Cu(II) complexes with azo initiators (i.e., reverse ATRP) was conducted. The influence of several factors, such as surfactant, catalyst, and reaction time, on the stability of the emulsion, the particle size, the morphology of the emulsion particles, and the control of the polymerization was investigated. The results showed great differences between ATRP and conventional emulsion polymerization, especially the nucleation mechanism and the kinetics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1542–1547, 2003     

铁(Ⅲ)—苯芴酮—聚乙二醇辛基苯基醚显色反应的研究及应用

详细研究了非离子表面活性剂聚乙二醇辛基苯基醚（OP）存在下铁（Ⅲ）与苯芴酮的显色反应。结果表明铁（Ⅲ）与苯芴酮形成了蓝紫色的配合物，其最大吸收波长λmax为614nm，对比度（△λ）为74nm，摩尔吸光系数ε614为6．41×104L·emol(-1)·cm(-1)，铁量在0～16μg／25mL范围内服从比耳定律。所拟方法用于磷矿样中铁的分析与邻菲罗啉法结果一致。