Cycloolefin copolymer/fumed silica nanocomposites

We prepared cycloolefin copolymer (COC)/fumed silica nanocomposites by melt compounding to study the effect of the filler dimensions (filler surface area) on the physical properties, with particular attention to their thermal, mechanical, and optical behaviors. Thermogravimetric analysis revealed a positive contribution of silica nanoparticles to the thermal degradation resistance of COC, as the decomposition temperature of the nanofilled samples increased by 40°C with respect to that of the unfilled matrix. Dynamic mechanical thermal analysis and quasi‐static tensile tests of the nanocomposites evidenced a slight stiffening effect, proportional to the nanofiller surface area, without any reduction in the fracture toughness. Creep resistance of the nanocomposites was increased by the addition of silica nanoparticles, especially when high‐surface‐area nanoparticles were used. The positive effect of the nanoparticles on the viscoelastic and fracture behavior was related to the uniform dispersion of silica aggregates in the matrix. Ultraviolet–visible spectrometry measurements evidenced that the original transparency of neat COC was practically maintained after the addition of silica nanoparticles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface electrostatic potentials in carbon nanotubes and graphene membranes investigated with electron holography

We used low-voltage transmission electron holography to probe surface electrostatic potentials in graphene membranes and carbon nanotubes, as the number of graphenes varies. Further, we measured the phase shift induced by an individual graphene, and mapped the phase shift variation throughout a whole few-graphene-crystal as a function of the local number of layers. We found a size/surface effect as the ratio between the surface and the total number of atoms increases for an individual nanotube or graphene membrane. This surface phase term can be related to a fine electrostatic potentials redistributions occurring at the outer layers in carbon nanotubes and graphene membranes.     

The citer-success-index: a citer-based indicator to select a subset of elite papers

The goal of this paper is introducing the citer-success-index (cs-index), i.e. an indicator that uses the number of different citers as a proxy for the impact of a generic set of papers. For each of the articles of interest, it is defined a comparison term—which represents the number of citers that, on average, an article published in a certain period and scientific field is expected to “infect”—to be compared with the actual number of citers of the article. Similarly to the recently proposed success-index (Franceschini et al. Scientometrics 92(3):621–6415, 2011), the cs-index allows to select a subset of “elite” papers. The cs-index is analyzed from a conceptual and empirical perspective. Special attention is devoted to the study of the link between the number of citers and cited authors relating to articles from different fields, and the possible correlation between the cs- and the success-index. Some advantages of the cs-index are that (i) it can be applied to multidisciplinary groups of papers, thanks to the field-normalization that it achieves at the level of individual paper and (ii) it is not significantly affected by self citers and recurrent citers. The main drawback is its computational complexity.     

A Spaceborne Gravity Gradiometer Concept Based on Cold Atom Interferometers for Measuring Earth’s Gravity Field

We propose a concept for future space gravity missions using cold atom interferometers for measuring the diagonal elements of the gravity gradient tensor and the spacecraft angular velocity. The aim is to achieve better performance than previous space gravity missions due to a very low white noise spectral behavior and a very high common mode rejection, with the ultimate goals of determining the fine structures of the gravity field with higher accuracy than GOCE and detecting time-variable signals in the gravity field better than GRACE.     

Growth on poly(l-lactic acid) porous scaffold preserves CD73 and CD90 immunophenotype markers of rat bone marrow mesenchymal stromal cells

Few data are available on the effect of biomaterials on surface antigens of mammalian bone marrow-derived, adult mesenchymal stromal cells (MSCs). Since poly(l-lactic acid) or PLLA is largely used in tissue engineering of human bones, and we are developing a reverse engineering program to prototype with biomaterials the vascular architecture of bones for their bioartificial reconstruction, both in humans and animal models, we have studied the effect of porous, flat and smooth PLLA scaffolds on the immunophenotype of in vitro grown, rat MSCs in the absence of any coating, co-polymeric enrichment, and differentiation stimuli. Similar to controls on plastic, we show that our PLLA scaffold does not modify the distribution of some surface markers in rat MSCs. In particular, the maintained expression of CD73 and CD90 on two different subpopulations (small and large cells) is consistent with their adhesion to the PLLA scaffold through specialized appendages, and to their prominent content in actin. In addition, our PLLA scaffold favours retention of the intermediate filament desmin, believed a putative marker of undifferentiated state. Finally, it preserves all rat MSCs morphotypes, and allows for their survival, adhesion to the substrate, and replication. Remarkably, a subpopulation of rat MSCs grown on our PLLA scaffold exhibited formation of membrane protrusions of uncertain significance, although in a size range and morphology compatible with either motility blebs or shedding vesicles. In summary, our PLLA scaffold has no detrimental effect on a number of features of rat MSCs, primarily the expression of CD73 and CD90.     

Interface Functionalities in Multilayer Stack Organic Light Emitting Transistors (OLETs)

Herein is described a multidisciplinary approach to understand the performance limitations of small molecule organic light emitting transistors (OLETs) based on a layered architecture, an innovative architecture potentially competitive with the state of the art and more flexible for spectral emission control. The processes of charge injection and field‐effect transport at metal/organic and organic/organic interfaces are analysed using microscopic and spectroscopic techniques in coordination. Atomic force microscopy and ultrasonic force microscopy are employed to characterize the interface morphology and the initial growth stages of organic films where charge transport actually occurs. X‐ray diffraction and near edge X‐ray dichroic absorption with linearly polarised light allow to determine the unit cell packing and the molecular orientation at the active organic interfaces, as well as the amount of non‐ordered domains. Moreover, chemical reactivity at the interfaces is measured by X‐ray photoelectron spectroscopy. It is found that a strong reaction occurs at the metal‐organic interfaces, with molecular fragmentation. Additionally, the transport properties strongly depend on the nature of the materials forming the organic stack. Specifically, amorphous conjugated films as bottom layers can promote an increased molecular disorder in the upper active layer, with a concomitant deterioration of the conduction properties.     

Post‐Deposition Activation of Latent Hydrogen‐Bonding: A New Paradigm for Enhancing the Performances of Bulk Heterojunction Solar Cells

Small conjugated molecules (SM) are gaining momentum as an alternative to semiconducting polymers for the production of solution‐processed bulk heterojunction (BHJ) solar cells. The major issue with SM‐BHJs is the low carrier mobility due to the scarce control on the phase‐segregation process and consequent lack of preferential percolative pathways for electrons and holes to the extraction electrodes. Here, a new paradigm for fine tuning the phase‐segregation in SM‐BHJs, based on the post‐deposition exploitation of latent hydrogen bonding in binary mixtures of PCBM with suitably functionalized electron donor molecules, is demonstrated. The strategy consist in the chemical protection of the H‐bond forming sites of the donor species with a thermo‐labile functionality whose controlled thermal cleavage leads to the formation of stable, crystalline, phase‐separated molecular aggregates. This approach allows the fine tuning of the nanoscale film connectivity and thereby to simultaneously optimize the generation of geminate carriers at the donor–acceptor interfaces and the extraction of free charges via ordered phase‐separated domains. As a result, the PV efficiency undergoes an over twenty‐fold increase with respect to control devices. This strategy, demonstrated here with mixtures of diketopyrrolopyrrole derivatives with PCBM can be extended to other molecular systems for achieving highly efficient SM‐BHJ solar cells.     

Xylanase Inhibitors: Defense Players in Plant Immunity with Implications in Agro-Industrial Processing

Xylanase inhibitors (XIs) are plant cell wall proteins largely distributed in monocots that inhibit the hemicellulose degrading activity of microbial xylanases. XIs have been classified into three classes with different structures and inhibition specificities, namely Triticum aestivum xylanase inhibitors (TAXI), xylanase inhibitor proteins (XIP), and thaumatin-like xylanase inhibitors (TLXI). Their involvement in plant defense has been established by several reports. Additionally, these inhibitors have considerable economic relevance because they interfere with the activity of xylanases applied in several agro-industrial processes. Previous reviews highlighted the structural and biochemical properties of XIs and hypothesized their role in plant defense. Here, we aimed to update the information on the genomic organization of XI encoding genes, the inhibition properties of XIs against microbial xylanases, and the structural properties of xylanase-XI interaction. We also deepened the knowledge of XI regulation mechanisms in planta and their involvement in plant defense. Finally, we reported the recently studied strategies to reduce the negative impact of XIs in agro-industrial processes and mentioned their allergenicity potential.     

Role of Oxidative Stress in Peyronie’s Disease: Biochemical Evidence and Experiences of Treatment with Antioxidants

Background: Peyronie’s disease (PD) is a chronic inflammatory condition affecting adult males, involving the tunica albuginea of the corpora cavernosa of the penis. PD is frequently associated with penile pain, erectile dysfunction, and a secondary anxious–depressive state. The etiology of PD has not yet been completely elucidated, but local injury is generally recognized to be a triggering factor. It has also been widely proven that oxidative stress is an essential, decisive component in all inflammatory processes, whether acute or chronic. Current conservative medical treatment comprises oral substances, penile injections, and physical therapy. Aim: This article intends to show how antioxidant therapy is able to interfere with the pathogenetic mechanisms of the disease. Method: This article consists of a synthetic narrative review of the current scientific literature on antioxidant therapy for this disease. Results: The good results of the antioxidant treatment described above also prove that the doses used were adequate and the concentrations of the substances employed did not exceed the threshold at which they might have interacted negatively with the mechanisms of the redox regulation of tissue. Conclusions: We believe new, randomized, controlled studies are needed to confirm the efficacy of treatment with antioxidants. However, we consider the experiences of antioxidant treatment which can already be found in the literature useful for the clinical practice of urologists in the treatment of this chronic inflammatory disease.