Tribological properties of HVOF as-sprayed and heat treated Co–Mo–Cr–Si coatings

HVOF-sprayed Co–28%Mo–17%Cr–3%Si alloy tribological performance was tested in the as-sprayed condition and after thermal treatments at 200, 400, 600 °C for 1 h. As-sprayed coating possesses low hardness, undergoes adhesive wear against 100Cr6 steel and displays an high-friction coefficient causing relevant thermal effects. The 600 °C-heat treatment increases microhardness, thus preventing adhesive wear and reducing friction.     

Atomic force microscopy of protein films and crystals

A customized atomic force microscopy (AFM) instrument optimized for imaging protein crystals in solution is described. The device was tested on crystals and Langmuir-Blodgett (LB) films of two proteins with quite different molecular weights. This approach enables the periodicity and morphology of crystals to be studied in their mother liquid, thereby preserving the native periodic protein crystal structure, which is typically destroyed by drying. Moreover, the instrument appears to distinguish protein crystals from salt crystals, which under the optical microscope are frequently quite similar, the difference between them often being revealed only during x-ray analysis. AFM estimates of the packing, order, and morphology of the given single proteins appear quite similar in the LB thin film and in the crystals, which means that routine crystal measurements can be performed at high resolution. The AFM consists of a custom-built measuring head and a homemade flexible SPM controller which can drive the head for contact, noncontact and spectroscopy modes, thus providing the user with a high degree of customization for crystal measurement.     

Construction and evaluation of a disposable pH sensor based on a large core plastic optical fiber

The fabrication and characterization of a disposable optical fiber sensor for the detection of pH in the range 5-8 are described. The sensing element is a drop of sol-gel hybrid material containing phenol red and deposited onto the tip of a large core plastic optical fiber. This fiber is also exploited for the optical interrogation. This probe can be used as a disposable part of a measuring system. The dynamic range and temporal response of the sensor are here investigated.     

Simulations of scanning electron microscopy imaging and charging of insulating structures

We present a three‐dimensional simulation of scanning electron microscope (SEM) images and surface charging. First, the field above the sample is calculated using Laplace's equation with the proper boundary conditions; then, the simulation algorithm starts following the electron trajectory outside the sample by using electron ray tracing. When the electron collides with the specimen, the algorithm keeps track of the electron inside the sample by simulating the electron scattering history with a Monte Carlo code. During this phase, secondary and backscattered electrons are emitted to form an image and primary electrons are absorbed; therefore, a charge density is formed in the material. This charge density is used to recalculate the field above and inside the sample by solving the Poisson equation with the proper boundary conditions. Field equation, Monte Carlo scattering simulation, and electron ray tracing are therefore integrated in a self‐consistent fashion to form an algorithm capable of simulating charging and imaging of insulating structures. To maintain generality, this algorithm has been implemented in three dimensions. We shall apply the so‐defined simulation to calculate both the global surface voltage and local microfields induced by the scanning beam. Furthermore, we shall show how charging affects resolution and image formation in general and how its characteristics change when imaging parameters are changed. We shall address magnification, scanning strategy, and applied field. The results, compared with experiments, clearly indicate that charging and the proper boundary conditions must be included in order to simulate images of insulating features. Furthermore, we shall show that a three‐dimensional implementation is mandatory for understanding local field formation.     

Transient kinetic study of the SCR-DeNOx reaction

The unsteady-state kinetics of the selective catalytic reduction (SCR) of NO with NH₃ is studied over V₂O₅–WO₃/TiO₂ model catalysts by means of the transient response method. NH₃ strongly adsorbs onto the catalyst surface whereas NO does not adsorb appreciably. A dynamic mathematical model based on a Temkin-type desorption process for NH₃ and a SCR reaction rate with a complex dependence on the ammonia surface coverage is well suited to represent the data.     

Analytical design method for a modified Schwarzschild optics

An innovative solution for the Schwarzschild optic, based on a modification of the position of the object, is proposed. This solution allows one to reach a larger numerical aperture and hence a better resolution compared with the standard configuration of the Schwarzschild optics. Furthermore, we propose an analytical solution that allows the optical system to be designed without the need of any ray-tracing software.     

Desire for euthanasia or physician-assisted suicide in palliative cancer care.

Objective: To investigate the attitudes of terminally ill individuals toward the legalization of euthanasia or physician-assisted suicide (PAS) and to identify those who would personally desire such a death. Design: In the Canadian National Palliative Care Survey, semistructured interviews were administered to 379 patients who were receiving palliative care for cancer. Patients who expressed a desire for physician-hastened death were followed prospectively. Main Outcome Measures: Attitudes toward the legalization of euthanasia or PAS were determined, as was the personal interest in receiving a hastened death. Demographic and clinical characteristics were also recorded, including a 22-item structured interview of symptoms and concerns. Results: There were 238 participants (62.8%) who believed that euthanasia and/or PAS should be legalized, and 151 (39.8%) who would consider making a future request for a physician-hastened death. However, only 22 (5.8%) reported that, if legally permissible, they would initiate such a request right away, in their current situations. This desire for hastened death was associated with lower religiosity (p = .010), reduced functional status (p = .024), a diagnosis of major depression (p     

Employing virtual humans for education and training in X3D/VRML worlds

Web-based education and training provides a new paradigm for imparting knowledge; students can access the learning material anytime by operating remotely from any location. Web3D open standards, such as X3D and VRML, support Web-based delivery of Educational Virtual Environments (EVEs). EVEs have a great potential for learning and training purposes, by allowing one to circumvent physical, safety, and cost constraints. Unfortunately, EVEs often leave to the user the onus of taking the initiative both in exploring the environment and interacting with its parts. A possible solution to this problem is the exploitation of virtual humans acting as informal coaches or more formal instructors. For example, virtual humans can be employed to show and explain maintenance procedures, allowing learners to receive more practical explanations which are easier to understand. However, virtual humans are rarely used in Web3D EVEs, since the programming effort to develop and re-use them in different environments can be considerable. In this paper, we present a general architecture that allows content creators to easily integrate virtual humans into Web3D EVEs. To test the generality of our solution, we present two practical examples showing how the proposed architecture has been used in different educational contexts.