Exploring Pharmacological Functions of Alternatively Spliced Variants of the Mu Opioid Receptor Gene,Oprm1, via Gene-Targeted Animal Models

The mu opioid receptor has a distinct place in the opioid receptor family, since it mediates the actions of most opioids used clinically (e.g., morphine and fentanyl), as well as drugs of abuse (e.g., heroin). The single-copy mu opioid receptor gene, OPRM1, goes through extensive alternative pre-mRNA splicing to generate numerous splice variants that are conserved from rodents to humans. These OPRM1 splice variants can be classified into three structurally distinct types: (1) full-length 7 transmembrane (TM) carboxyl (C)-terminal variants; (2) truncated 6TM variants; and (3) single TM variants. Distinct pharmacological functions of these splice variants have been demonstrated by both in vitro and in vivo studies, particularly by using several unique gene-targeted mouse models. These studies provide new insights into our understanding of the complex actions of mu opioids with regard to OPRM1 alternative splicing. This review provides an overview of the studies that used these gene-targeted mouse models for exploring the functional importance of Oprm1 splice variants.     

Interfacial stress transfer in nylon‐6/E‐Glass microcomposites: Effect of temperature and strain rate

In this study, the interfacial properties between E‐glass fibers with different commercial sizings have been investigated on model composites with a nylon‐6 matrix. In particular, the fiber critical length was measured by means of the single‐fiber fragmentation test over a wide range of temperatures (from 25 to 175°C) and strain rates (from 0.0008 to 4 min⁻¹). The general trend observed is that the fiber critical aspect ratio increases as the temperature increases and it decreases as strain rate is increased. The fiber critical aspect ratio for unsized fibers resulted to be reasonably well linearly related to the square root of the fiber to matrix modulus ratio. This results is in accordance with the Cox's shear‐lag theoretical model and the Termonia's numerical simulations. Sized fibers display an higher deviation from the theoretical prevision probably because of the presence of interphases whose properties are different from the bulk matrix. As a consequence, the interfacial shear strength values resulted to be dependent on the fiber sizing. In particular, the fibers coated with an epoxy sizing showed a superior thermal stability of the fiber matrix‐interface with respect to the unsized or nylon compatible sized fibers.     

Cathodic protection of carbon steel in natural seawater: Effect of sunlight radiation

Cathodic protection of metals in seawater is known to be influenced by chemical–physical parameters affecting cathodic processes (oxygen discharge, hydrogen evolution and calcareous deposit precipitation). In shallow seawater, these parameters are influenced by sunlight photoperiod and photosynthetic activity. The results presented here represent the first step in studies dedicated to cathodic protection in shallow photic seawater. This paper reports on carbon steel protected at −850 mV vs. Ag/AgCl (oxygen limiting current regime) in the presence of sunlight radiation but in the absence of biological and photosynthetic activity, the role of which deserves future research. Comparison of results obtained by exposing electrochemical cells to daylight cycles in both biologically inactivated natural seawater and in NaCl 3.5 wt.% solutions showed that sunlight affects current densities and that calcareous deposit interfere with light-currents effects. Sunlight radiation and induced heating of the solution have been separated, highlighting results not otherwise obvious: (1) observed current waves concomitant with sunlight radiation depend fundamentally on solar radiation, (2) solar radiation can determine current enhancements from early to late phases of aragonite crystal growth, (3) a three-day-old CaCO₃ layer reduces but does not eliminate the amplitude of the current waves. Theoretical calculations for oxygen limiting currents and additional field tests showed that sunlight, rather than bulk solution heating, is the main cause of daily current enhancements. This was confirmed by polarizations performed at −850 and −1000 mV vs. Ag/AgCl (constant bulk temperature), during which the electrode was irradiated with artificial lighting. This test also confirmed O₂ discharge to be the cathodic process involved. A mechanism of radiation conversion to heat in the oxygen diffusion layer region is proposed.     

An experimental investigation of Fischer–Tropsch synthesis over washcoated metallic structured supports

In principle, the application of monolithic catalysts to the Fischer–Tropsch synthesis can solve many of the problems related to the classical Fischer–Tropsch reactors, in particular concerning the necessity to operate with short diffusion distances and low pressure drops, preferably according to the ideal plug-flow behavior, while still maintaining a reasonable inventory of catalytic material in the reactor volume.The preparation of prototype cobalt-based catalysts, washcoated onto metallic structured supports with different geometries, is described herein, together with the evaluation of the catalytic properties of such systems in the Fischer–Tropsch synthesis at industrially relevant process conditions (220–235 °C, 20 bar, 2.1  mol_H2/mol_CO,  5000 cm³(STP)_CO+H2/h/g_cat). Comparative tests with the same catalyst in the powdered form were also carried out at the same process conditions.It was found that the structured catalysts maintained the activity and the selectivity of the original powdered catalyst, provided that the washcoat thickness is sufficiently thin.     

Lead Free Cu-Containing Frit for Modern Metallic Glaze

A lead-free frit containing high amount of copper and its glaze conceived for fine porcelain stoneware tiles were investigated. The glazes obtained under industrial firing were studied using X-ray photoelectron spectroscopy, X-ray diffraction, optical and scanning electron microscopy with energy dispersion spectroscopy. The mechanism of the red color formation on the surface was explained. The results indicated that the glaze presents a metallic gloss and iridescent colors on the surface, mainly associated to the formation of CuO crystallites and Cu metallic particles. Moreover, the Cu glaze showed a good chemical durability; this is particularly interesting because commercial Cu frits usually present poor chemical properties.     

Synthesis and characterization of ET(P)S-4 and ET(P)S-10

Phosphorus containing ET(P)S-4 and ET(P)S-10 were synthesized from gels of composition xNa₂O–0.6KF–0.2TiO₂–(1.28 − 4y)xHCl–yP₂O₅–1.49SiO₂–39.5H₂O at 190 °C for 3 days. The XRD patterns are almost identical to the corresponding ETS samples. The presence of phosphorus in the initial gel influences the kinetic parameters of the crystallization process, the morphology and the size of the crystals. The ³¹P-NMR of the samples show that part of the phosphorus is attached at the siliceous surface as dihydrogenophosphate SiOPO(OH)₂ groups and cannot be introduced in a tetrahedral or octahedral framework position.     

An experimental comparison of a graphite electrode and a gas diffusion electrode for the cathodic production of hydrogen peroxide

This work studies the production of hydrogen peroxide through the cathodic reduction of oxygen in acidic medium, by comparing the results obtained using a commercial graphite and a gas diffusion electrode. A low pH was required to allow the application of hydrogen peroxide generation to an electro-Fenton process. The influence of applied potential and the gas flow composition were investigated. The gas diffusion electrode demonstrates a higher selectivity for hydrogen peroxide production, without significantly compromising the iron regeneration, thus making its successful application to a cathodic Fenton-like treatment, possible. Unlike the graphite cathode, the gas diffusion cathode also proved to be effective in the air flow.     

Characterization of laser energy consumption in sintering of polymer based powders

This paper presents an analysis of Laser Sintering (LS) process from an energy standpoint. LS has a potential as an environmental benign alternative to traditional processes but only few authors deal with the process optimization including the energy aspects. This work evaluates the effect of the energy density in processing of two polymeric materials: polyamide powder and a phenolic resin coated sand. The different behaviour of the two materials is studied by analysing the geometrical features (depth and width) of linear sintered structures. In particular the volumetric productivity and the energy intensity of the process are calculated to characterize the sintering process.It is shown how an upper limit to the energy consumption can be remarked. Measurements reveal that within the energy density range of 0.02-0.1 J/mm² the whole energy input is useful for the agglomeration process. The use of higher energy density produces different results for both the cases analysed. A proper selection of energy density maintains the energy requirement below the level of 10⁶ J/kg which is considered a lower limit for manufacturing process.     

Effects of cutting angle,edge preparation,and nano-structured coating on milling performance of a gamma titanium aluminide

Gamma titanium aluminides are intermetallic alloys. Recently, they have been evaluated as important contenders for structural applications in the automotive and aerospace sectors. This is due to their excellent high-temperature performances and their significantly lower density compared to nickel-based superalloys. In this paper, an analysis of machinability of a gamma TiAl obtained via an electron beam melting (EBM) process is presented. The effects of tool geometry modifications, in terms of cutting tool angles and cutting edge preparation, were investigated. The reduction of radial rake angle and the drag finishing process for cutting edge preparation resulted in an increase of the tool life of the carbide end mills. Nanogradient tool coatings were also observed to affect tool wear during milling tests, and the results highlight that AlSiTiN coating performs better compared to CrAlSiN coating. A post-coating polishing treatment was also taken into account, and it allowed a further reduction of tool wear. The overall results indicate that the machinability of this difficult-to-cut material can be significantly improved by an adjustment of the cutting edge geometry, and by using an AlSiTiN coating system.