Effects of Prior Annealing on the Spark Plasma Sintering of Nanostructured Y2O3 Powders

The effects produced by annealing Y₂O₃ nanopowders on their spark plasma sintering (SPS) behavior are systematically investigated in this work. It is found that the annealed powders display higher sinterability with respect to the as‐received ones. Indeed, the maximum densification level reached from pristine powders is about 97.5%, whereas density decreases when further increasing either the sintering temperature or the dwell time. In contrast, the density of SPS products obtained from pretreated powder monotonically increases with temperature and processing time, thus leading to fully dense materials in 30 min at 1050°C and 60 MPa. Correspondingly, it is found that the annealing treatment markedly inhibits grain coarsening during SPS. Thus, dense translucent samples with grain size below 100 nm can be attained from annealed powders. On the other hand, white‐opaque specimens with significantly coarser microstructures (up to 1‐μm‐sized grains) are obtained when pristine powders are directly processed under the same sintering conditions. Furthermore, it is observed that the annealing treatment of SPS samples in air allows for graphite contamination removal, whereas no improvement in term of light transmittance is produced.     

Identification of Aminoimidazole and Aminothiazole Derivatives as Src Family Kinase Inhibitors

Src family kinases (SFKs) are a family of non‐receptor tyrosine kinases (TKs) implicated in the regulation of many cellular processes. The aberrant activity of these TKs has been associated with the growth and progression of cancer. In particular, c‐Src is overexpressed or hyperactivated in a variety of solid tumors and is most likely a strong promoting factor for the development of metastasis. Herein, the synthesis of new 4‐aminoimidazole and 2‐aminothiazole derivatives and their in vitro biological evaluation are described for their potential use as SFK inhibitors. Initially, 2‐aminothiazole analogues of dasatinib and 4‐aminoimidazole derivatives were synthesized and tested against the SFKs Src, Fyn, Lyn, and Yes. Five hits were identified as the most promising compounds, with K_i values in the range of 90–480 nm . A combination of molecular docking, homology modeling, and molecular dynamics were then used to investigate the possible binding mode of such compounds within the ATP binding site of the SFKs. Finally, the antiproliferative activities of the best candidates were evaluated against SH‐SY5Y and K562 cell lines. Compound 3 b [2‐(4‐{2‐methyl‐6‐[(5‐phenylthiazol‐2‐yl)amino]pyrimidin‐4‐yl}piperazin‐1‐yl)ethanol] was found to be the most active inhibitor.     

Oxidative Stress in Obesity: A Critical Component in Human Diseases

Obesity, a social problem worldwide, is characterized by an increase in body weight that results in excessive fat accumulation. Obesity is a major cause of morbidity and mortality and leads to several diseases, including metabolic syndrome, diabetes mellitus, cardiovascular, fatty liver diseases, and cancer. Growing evidence allows us to understand the critical role of adipose tissue in controlling the physic-pathological mechanisms of obesity and related comorbidities. Recently, adipose tissue, especially in the visceral compartment, has been considered not only as a simple energy depository tissue, but also as an active endocrine organ releasing a variety of biologically active molecules known as adipocytokines or adipokines. Based on the complex interplay between adipokines, obesity is also characterized by chronic low grade inflammation with permanently increased oxidative stress (OS). Over-expression of oxidative stress damages cellular structures together with under-production of anti-oxidant mechanisms, leading to the development of obesity-related complications. The aim of this review is to summarize what is known in the relationship between OS in obesity and obesity-related diseases.     

The Anti-Inflammatory Effects of the Methanolic Extract and Fractions from Davilla elliptica St. Hil. (Dilleniaceae) on Bothrops jararaca Envenomation

Inflammation and haemorrhage are the main characteristics of tissue injury in botropic envenomation. Although some studies have shown that anti-venom prevents systemic reactions, it is not efficient in preventing tissue injury at the site of the bite. Therefore, this work was undertaken to investigate the anti-inflammatory effects of the methanolic extract and fractions from D. elliptica and to evaluate the role of matrix metalloproteinases (MMPs) in this process. Effects of the extract and fractions from D. elliptica were evaluated using a carrageenan-induced paw oedema model in rats, and leukocyte rolling was visualized by intravital. The quantification of MMPs activities (MMP-2 and MMP-9) extracted from the dermis of mice treated with extract and fractions alone or incubated with venom was determined by zymographic analyses. Our results show that intraperitoneal (i.p.) injection of fractions significantly reduced paw oedema after the carrageenan challenge. Treatment with the tannins fraction also resulted in considerable inhibition of the rolling of leukocytes and this fraction was able to decrease the activation of MMP-9. These results confirmed the anti-inflammatory activity of the methanolic extract and tannins fraction of D. elliptica and showed that the dermonecrosis properties of B. jararaca venom might be mediated through the inhibition of MMP-9 activity.     

New Insights into Lignin Modification during Chlorine Dioxide Bleaching Sequences (III): The Impact of Modifications in the (EO) versus E Stage on the D1 Stage

Abstract

Chlorine dioxide delignification (D₀) modifies kraft residual lignin by oxidizing phenolic groups to both quinone and muconic acid structures. Alkaline extraction (E), in addition to removing solubilized lignin, converts quinone moieties to polyphenols. These polyphenols are easily oxidized by oxygen in an (EO) stage or by ClO₂ in a D₁ stage to hydroxyquinones (～1.8 mmol/g lignin). Pulps treated by D₀E consume considerably more ClO₂ in the D₁ than D₀(EO), and have lower bleachability, as was quantified by a simple bleaching model. Both D₀E and D₀(EO) pulps approach a common brightness ceiling (～83 ISO) when excess ClO₂ is applied. Examination of the post‐D₁ b* values indicates that D₀E and D₀(EO) also have similar asymptotic b* values (～6), indicating that both pulps have similar residual chromophores. Hydroxyquinone structures appear to be eliminated in the D₁ stage for D₀(EO) pulps, and at high ClO₂ levels for D₀E pulps.     

Thermodynamic consistency of the multi-scale Gibbs–Helmholtz constrained equation of state

The multi-scale Gibbs–Helmholtz constrained (GHC) equation is a new predictive cubic equation of state that constrains the energy parameter in the SRK equation to satisfy the Gibbs–Helmholtz equation. It makes use of internal energies of departure calculated from NTP Monte Carlo simulations at the molecular length scale and a novel up-scaling expression to determine the energy parameter at the bulk phase length scale.     

Integrated combined cycle from natural gas with CO2 capture using a Ca–Cu chemical loop

The integration in a natural gas combined cycle (NGCC) of a novel process for H₂ production using a chemical Ca–Cu loop was proposed. This process is based on the sorption‐enhanced reforming process for H₂ production from natural gas with a CaO/CaCO₃ chemical loop, but including a second Cu/CuO loop to regenerate the Ca‐sorbent. An integration of this system into a NGCC was proposed and a full process simulation exercise of different cases was carried out. Optimizing the operating conditions in the Ca–Cu looping process, 8.1% points of efficiency penalty with respect to a state‐of‐the‐art NGCC are obtained with a CO₂ capture efficiency of 90%. It was demonstrated that the new process can yield power generation efficiencies as high as any other emerging and commercial concepts for power generation from NGCC with CO₂ capture, but maintaining competing advantages of process simplification and compact pressurized reactor design inherent to the Ca–Cu looping system. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2780–2794, 2013     

Effect of thermal conditioning on the initiation threshold of secondary high-explosives

While most performance metrics of high-explosive (HE) based devices like detonation velocity, detonation pressure, and energy output are expected to degrade over time, the evolution of initiation threshold appears less clear, with claims of both increasing and decreasing trends in threshold having been made in the literature. This work analyzes D-optimally designed sequential binary test data for a few thermally conditioned porous-powder and polymer-bonded HE initiator systems using a Bayesian likelihood method employing the probit regression model. We find that in most cases the initiation threshold decreases (i. e., sensitivity increases) upon accelerated thermal conditioning. However, such results are nuanced and influenced by factors like the contact area of initiating stimulus, HE characteristics like density and specific surface area, as well as possible thermally induced changes to other materials and interfaces involved.     

On the formation of blisters in annealed hydrogenated a-Si layers

Differently hydrogenated radio frequency-sputtered a-Si layers have been studied by infrared (IR) spectroscopy as a function of the annealing time at 350°C with the aim to get a deeper understanding of the origin of blisters previously observed by us in a-Si/a-Ge multilayers prepared under the same conditions as the ones applied to the present a-Si layers. The H content varied between 10.8 and 17.6 at.% as measured by elastic recoil detection analysis. IR spectroscopy showed that the concentration of the clustered (Si-H)_n groups and of the (Si-H₂)_n (n ≥ 1) polymers increased at the expense of the Si-H mono-hydrides with increasing annealing time, suggesting that there is a corresponding increase of the volume of micro-voids whose walls are assumed from literature to be decorated by the clustered mono-hydride groups and polymers. At the same time, an increase in the size of surface blisters was observed. Also, with increasing annealing time, the total concentration of bonded H of any type decreases, indicating that H is partially released from its bonds to Si. It is argued that the H released from the (Si-H)_n complexes and polymers at the microvoid surfaces form molecular H₂ inside the voids, whose size increases upon annealing because of the thermal expansion of the H₂ gas, eventually producing plastic surface deformation in the shape of blisters.