Real-time scalable hardware architecture for 3D-HEVC bipartition modes

This article presents a real-time scalable hardware architecture for the bipartition modes of 3D high-efficiency video coding (3D-HEVC) standard, which includes the depth modeling modes 1 (DMM-1) and 4 (DMM-4). A simplification of the DMM-1 algorithm was done, removing the refinement step. This simplification causes a small BD-rate increase (0.09 %) with the advantage of better using our hardware resources, reducing the necessary memory required for storing all DMM-1 wedgelet patterns by 30 %. The scalable architecture can be configured to support all the different block sizes supported by the 3D-HEVC and also to reach different throughputs, according to the application requirements. Then, the proposed solution can be efficiently used for several encoding scenarios and many different applications. Synthesis results considering a test case show that the designed architecture is capable of processing HD 1080p videos in real time, but with other configurations, higher resolutions are also possible to be processed.     

Periodic orbits of oval billiards on surfaces of constant curvature

In this paper, we define and study the billiard problem on bounded regions on surfaces of constant curvature. We show that this problem defines a two-dimensional conservative and reversible dynamical system, defined by a Twist diffeomorphism, if the boundary of the region is an oval. Using these properties and defining good perturbations for billiards, we show that having only a finite number of nondegenerate periodic orbits for each fixed period is an open property for billiards on surfaces of constant curvature and a dense one on the hyperbolic plane. We finish this paper studying the stability of these nondegenerate orbits.     

Self-cleaning and colour-preserving efficiency of photocatalytic concrete: case study of the Jubilee Church in Rome

ABSTRACT

The Jubilee Church in the south-eastern outskirts of Rome is one of the first buildings constructed with super white reinforced concrete with self-cleaning photocatalytic cement. However, 16 years after the opening of the building, the self-cleaning and colour-preserving properties arising from the titania particles (TiO2) within the concrete mix are not meeting the design requirements and the concrete is showing premature evidence of decay. While the form of the decay is affecting the appearance of the building and not its structural soundness, the ageing pattern of the building's components is resulting in a high maintenance cost, one not easily affordable within the ordinary budget supported by a small parish. This study comprises the first comprehensive step in understanding the causes of the accelerated ageing pattern of the concrete, highlighting methods to improve the long-term durability of the concrete and therefore reduce the cost of its maintenance. Moreover, this research offered the opportunity to test the durability and the effectiveness of the TiO₂ in the real conditions on an actual building featuring non-standard geometries. The findings highlight how the ageing pattern directly connects with the geometry of the building and inadequate consideration of the local weathering at the design stage.     

A strategy for the efficient full-wave description of complex waveguide networks

The mode-matching analysis of rectangular waveguide networks requires a complex segmentation of the structure into simple elements. The way these elements are connected has a strong influence on the computing performance of the code. Moreover, for complex structures the size of the coefficient matrix of the main system can easily reach unaffordable dimensions, so that the use of an efficient solving strategy becomes indispensable. A new approach to the optimum automatic choice of the interconnections is presented, leading to a highly stable and outperforming method of analysis. A Butler 4 × 4 matrix, with six branch guide couplers and four phase shifters, containing 336 uniform waveguide sections and bifurcations, has been studied, and the presented strategy has allowed a performance increase up to two orders of magnitude. © 1996 John Wiley & Sons, Inc.     

The Association between Gut Microbiota and Osteoarthritis: Does the Disease Begin in the Gut?

Some say that all diseases begin in the gut. Interestingly, this concept is actually quite old, since it is attributed to the Ancient Greek physician Hippocrates, who proposed the hypothesis nearly 2500 years ago. The continuous breakthroughs in modern medicine have transformed our classic understanding of the gastrointestinal tract (GIT) and human health. Although the gut microbiota (GMB) has proven to be a core component of human health under standard metabolic conditions, there is now also a strong link connecting the composition and function of the GMB to the development of numerous diseases, especially the ones of musculoskeletal nature. The symbiotic microbes that reside in the gastrointestinal tract are very sensitive to biochemical stimuli and may respond in many different ways depending on the nature of these biological signals. Certain variables such as nutrition and physical modulation can either enhance or disrupt the equilibrium between the various species of gut microbes. In fact, fat-rich diets can cause dysbiosis, which decreases the number of protective bacteria and compromises the integrity of the epithelial barrier in the GIT. Overgrowth of pathogenic microbes then release higher quantities of toxic metabolites into the circulatory system, especially the pro-inflammatory cytokines detected in osteoarthritis (OA), thereby promoting inflammation and the initiation of many disease processes throughout the body. Although many studies link OA with GMB perturbations, further research is still needed.     

Inactivation of Oxidative Enzymes by High-Intensity Pulsed Electric Field for Retention of Color in Carrot Juice

The effects of high-intensity pulsed electric fields (HIPEF) on oxidative enzymes and color of fresh carrot juice were studied. A response surface methodology (RSM) was used to evaluate the effect of pulse polarity (mono or bipolar mode), pulse width (from 1 to 7 μs), and pulse frequency (from 50 to 250 Hz) on color and peroxidase (POD) inactivation of carrot juice treated by HIPEF. The total treatment time and the electric field strength were set at 1,000 μs and 35 kV/cm, respectively, at a temperature below 35°C. The physicochemical characteristics of carrot juice were measured. There was a linear relationship between electrical conductivity and temperature of the carrot juice. The results showed that HIPEF-treated carrot juice at 35 kV/cm for 1,000 μs applying 6 μs pulse width at 200 Hz in bipolar mode led to 73.0% inactivation of POD. The color coordinates did not change significantly. Therefore, HIPEF was effective in POD inactivation and carrot juice color preservation.     

Cathodic protection monitoring of buried carbon steel pipeline: measurement and interpretation of instant-off potential

The criterion used to verify the cathodic protection condition of a structure is based on structure-to-electrolyte potential measurement, which can include an ohmic drop contribution. Among the available techniques, the use of potential probes with internal reference electrode and of corrosion coupons with a so-called soil-access tube represents the most appropriate way to measure the IR-free potential, eliminating the ohmic drop contribution. An alternative is represented by on-off technique if equalising, galvanic or stray currents are not present. Laboratory tests have been carried out in soil-simulating solution on cathodically protected carbon steel in order to evaluate the effectiveness of off-potential for the assessment of cathodic protection. Instant-off potential is not reliable in overprotection condition; moreover, the accuracy of the measurement is strongly influenced by the presence of external current as galvanic or equalising currents. The effect of low-pass filter in the data acquisition system on the potential reading is discussed.     

Mortar composition defined according to rheometer and flow table tests using factorial designed experiments

This paper reports the effects of distinct contents of silica fume (SF), superplasticizer (SP) and water/binder ratio (W/B) in mortars. Samples with SF (0–10 wt%), SP (1.0–1.2 wt%) and W/B ratio (0.30–0.35) were produced. Flow table test and rheometry were used as parameters to formulate mortars by means of a factorial design experiment. Setting time, water absorption, apparent porosity and compressive strength of mortars at 28 days were also determined. Mortar formulations with lower fluidity are restricting when a rheometer was used. For higher torques, adjustments with the regressive equation of the Bingham model are less accurate, since the flow behavior is less constant. On the other hand, mortars with higher fluidity it is limited by spread test. The spread value on flow table test is more related to yield stress than to plastic viscosity. The design experiments identified the main factors (SF, SP and W/B) and their interactions for all properties on the fresh and hardened state, showing that experimental design with multiple regression equations is an appropriate tool to be applied in this case. Water content was the controlling parameter for practically all properties studied.     

Outsourcing practices in automotive supply networks: an exploratory study of full service vehicle suppliers

Most automotive companies outsource the design, manufacturing and assembly of some complete cars to independent suppliers or full service vehicle companies (FSVs). FSVs represent a relatively unexplored form of outsourcing which combines joint efforts in developing a modular product with the externalisation of specific niche manufacturing processes. On the basis of comparative cases and of qualitative information collected within three FSVs and three OEMs, this study aims to investigate the associated advantages and risks for FSVs, commonalities/differences from the practices of outsourcing to component/module specialists that can be found in other industries and why and for what kind of products FSVs can be appropriate in automotive supply networks. The study contributes to the debate on outsourcing in the automotive industry by providing an original interpretation on why FSVs have recently seen a shakeout with some growing whilst others have faltered.