Inactivation of Oxidative Enzymes by High-Intensity Pulsed Electric Field for Retention of Color in Carrot Juice

The effects of high-intensity pulsed electric fields (HIPEF) on oxidative enzymes and color of fresh carrot juice were studied. A response surface methodology (RSM) was used to evaluate the effect of pulse polarity (mono or bipolar mode), pulse width (from 1 to 7 μs), and pulse frequency (from 50 to 250 Hz) on color and peroxidase (POD) inactivation of carrot juice treated by HIPEF. The total treatment time and the electric field strength were set at 1,000 μs and 35 kV/cm, respectively, at a temperature below 35°C. The physicochemical characteristics of carrot juice were measured. There was a linear relationship between electrical conductivity and temperature of the carrot juice. The results showed that HIPEF-treated carrot juice at 35 kV/cm for 1,000 μs applying 6 μs pulse width at 200 Hz in bipolar mode led to 73.0% inactivation of POD. The color coordinates did not change significantly. Therefore, HIPEF was effective in POD inactivation and carrot juice color preservation.     

Driving factors of the phytoplankton functional groups in a deep Mediterranean reservoir

The control of phytoplankton growth is mainly related to the availability of light and nutrients. Both may select phytoplankton species, but only if they occur in limiting amounts. During the last decade, the functional groups approach, based on the physiological, morphological and ecological attributes of the species, has proved to be a more efficient way to analyze seasonal changes in phytoplankton biomass. We analysed the dynamics of the phytoplankton functional groups sensu Reynolds, recognising the driving forces (light, mixing regime, and nutrients) in the Sau Reservoir, based on a one-year cycle (monthly surface-water sampling). The Sau Reservoir is a Mediterranean water-supply reservoir with a canyon-shaped basin and a clear and mixed epilimnion layer. The long stratification period and high light availability led to high phytoplankton biomass (110.8 fresh-weight mg L⁻¹) in the epilimnion during summer. The reservoir showed P-limitation for phytoplankton growth in this period. All functional groups included one or more species (X2-Rhodomonas spp.; Y-Cryptomonas spp.; F-Oocystis lacustris; K-Aphanocapsa spp.) selected by resources, especially phosphorus. Species of Cryptomonas (group Y) dominated during the mixing period (winter season) in conditions of low light and relatively high availability of dissolved nutrients. Increases in water-column stability during spring stratification led to phytoplankton biomass increases due to the dominance of small flagellate functional groups (X2 and X3, chrysophyceans). The colonial chlorophycean O. lacustris (group F) peaked during the mid-summer stratification, when the mixed epilimnion was clearly depleted in nutrients, especially SRP. High temperature and increases in nutrient concentration during the end-summer and mid-autumn resulted in a decrease of green algae (group F) and increase of Aphanocapsa spp. (cyanobacteria, group K) and dinoflagellates (group L_o). The study also revealed the important role of physical processes in the seasonal gradient, in selecting phytoplankton functional groups, and consequently in the assessment of ecological status. The Q index (assemblage index) based on functional groups indicated the overall good ecological status of the Sau Reservoir, which varied as a function of the mixing regime. This is the first application of the Assemblage Index to a European water-supply reservoir.     

Cathodic protection monitoring of buried carbon steel pipeline: measurement and interpretation of instant-off potential

The criterion used to verify the cathodic protection condition of a structure is based on structure-to-electrolyte potential measurement, which can include an ohmic drop contribution. Among the available techniques, the use of potential probes with internal reference electrode and of corrosion coupons with a so-called soil-access tube represents the most appropriate way to measure the IR-free potential, eliminating the ohmic drop contribution. An alternative is represented by on-off technique if equalising, galvanic or stray currents are not present. Laboratory tests have been carried out in soil-simulating solution on cathodically protected carbon steel in order to evaluate the effectiveness of off-potential for the assessment of cathodic protection. Instant-off potential is not reliable in overprotection condition; moreover, the accuracy of the measurement is strongly influenced by the presence of external current as galvanic or equalising currents. The effect of low-pass filter in the data acquisition system on the potential reading is discussed.     

DNS of turbulent thermal boundary layers up to Reθ = 2300

A technique, based on the Lund et al. (1998) [1] approach, is introduced in order to numerically prescribe time-dependent turbulent inflow conditions in spatially-developing thermal boundary layers. A major difference with Lund’s approach is that the new multi-scale approach considers different scaling laws for the inner and outer parts of the boundary layer. Direct numerical simulations (DNS) are performed for incompressible zero (ZPG) and adverse (APG) pressure gradient flows. To the best of our knowledge, the present DNS in ZPG flows at a momentum thickness Reynolds numbers (Re_θ) of 2300 represents the evolving thermal boundary layer simulations at the highest Re_θ in the turbulence community. The temperature is treated as a passive scalar with isothermal walls as a boundary condition and a molecular Prandtl number of 0.71. The predicted Stanton number shows fairly good agreement with empirical correlations, and experimental and numerical data from the literature. Moreover, the influences of the Reynolds number and the APG strength on thermal parameters are also examined. Furthermore, the budget of the temperature variance shows a significant increase of production, turbulent diffusion, and dissipation in the buffer layer at higher Reynolds numbers. The main effects of adverse pressure gradients on the temperature field are manifested by a decreasing trend of thermal fluctuations but an increasing trend of the wall-normal turbulent heat fluxes when normalized by wall units as the APG strength is augmented.     

Mortar composition defined according to rheometer and flow table tests using factorial designed experiments

This paper reports the effects of distinct contents of silica fume (SF), superplasticizer (SP) and water/binder ratio (W/B) in mortars. Samples with SF (0–10 wt%), SP (1.0–1.2 wt%) and W/B ratio (0.30–0.35) were produced. Flow table test and rheometry were used as parameters to formulate mortars by means of a factorial design experiment. Setting time, water absorption, apparent porosity and compressive strength of mortars at 28 days were also determined. Mortar formulations with lower fluidity are restricting when a rheometer was used. For higher torques, adjustments with the regressive equation of the Bingham model are less accurate, since the flow behavior is less constant. On the other hand, mortars with higher fluidity it is limited by spread test. The spread value on flow table test is more related to yield stress than to plastic viscosity. The design experiments identified the main factors (SF, SP and W/B) and their interactions for all properties on the fresh and hardened state, showing that experimental design with multiple regression equations is an appropriate tool to be applied in this case. Water content was the controlling parameter for practically all properties studied.     

Natural and human forcing in recent geomorphic change; case studies in the Rio de la Plata basin

An analysis of geomorphic system's response to change in human and natural drivers in some areas within the Río de la Plata basin is presented. The aim is to determine whether an acceleration of geomorphic processes has taken place in recent years and, if so, to what extent it is due to natural (climate) or human (land-use) drivers. Study areas of different size, socio-economic and geomorphic conditions have been selected: the Río de la Plata estuary and three sub-basins within its watershed. Sediment cores were extracted and dated (²¹⁰Pb) to determine sedimentation rates since the end of the 19th century. Rates were compared with time series on rainfall as well as human drivers such as population, GDP, livestock load, crop area, energy consumption or cement consumption, all of them related to human capacity to disturb land surface. Data on river discharge were also gathered. Results obtained indicate that sedimentation rates during the last century have remained essentially constant in a remote Andean basin, whereas they show important increases in the other two, particularly one located by the São Paulo metropolitan area. Rates in the estuary are somewhere in between. It appears that there is an intensification of denudation/sedimentation processes within the basin.Rainfall remained stable or varied very slightly during the period analysed and does not seem to explain increases of sedimentation rates observed. Human drivers, particularly those more directly related to capacity to disturb land surface (GDP, energy or cement consumption) show variations that suggest human forcing is a more likely explanation for the observed change in geomorphic processes. It appears that a marked increase in denudation, of a “technological” nature, is taking place in this basin and leading to an acceleration of sediment supply. This is coherent with similar increases observed in other regions.     

Outsourcing practices in automotive supply networks: an exploratory study of full service vehicle suppliers

Most automotive companies outsource the design, manufacturing and assembly of some complete cars to independent suppliers or full service vehicle companies (FSVs). FSVs represent a relatively unexplored form of outsourcing which combines joint efforts in developing a modular product with the externalisation of specific niche manufacturing processes. On the basis of comparative cases and of qualitative information collected within three FSVs and three OEMs, this study aims to investigate the associated advantages and risks for FSVs, commonalities/differences from the practices of outsourcing to component/module specialists that can be found in other industries and why and for what kind of products FSVs can be appropriate in automotive supply networks. The study contributes to the debate on outsourcing in the automotive industry by providing an original interpretation on why FSVs have recently seen a shakeout with some growing whilst others have faltered.     

Hydrogen production through anaerobic co-digestion of food waste and crude glycerol at mesophilic conditions

Hydrogen production from mesophilic anaerobic co-digestion of food waste (FW) and crude glycerol (GLC) was investigated in this study. Batch experiments were carried out at 35 °C for 36 h to assess the effect of supplementation of different glycerol concentrations (1%, 3% and 5% (v/v)) on dark fermentation of FW. The maximum hydrogen yield (180 mLH₂/gVS) was obtained at 5% GLC while the maximum specific production rate (around 13 mLH₂/(gVS.h)) was similar for all experiments with glycerol addition. Besides contributing to increase H₂ productivity, the presence of glycerol reduced the microorganisms acclimation time (Lag phase) in comparison to the control tests conducted without this co-substrate. In addition, the increment of glycerol concentration also enhanced volatile fatty acids generation and favoured the production of 1,3-propanediol (1,3-PDO). In the experimental conditions studied (i.e., 1–5% (v/v) of GLC), the results revealed that co-digestion of FW and GLC is promising and can be potentially used to maximize energy production while contributing to the management and treatment of these wastes.