Comparison of positive and negative ion detection of tea catechins using tandem mass spectrometry and ultra high performance liquid chromatography

Tea catechins are an important group of natural compounds associated with health promoting effects and desired commodities for the growing market of dietary supplements and functional foods. Consequently these compounds attract more interest of research groups worldwide. A reliable quantitative analysis of tea catechins is essential for human intervention studies, manufacturers of dietary supplements and quality control by authorities. UHPLC–ESI-MS/MS analytical method was chosen due to rapid runtime, high sensitivity and selectivity. The chromatographic separation of eight tea catechins was achieved within 2.5 min on C₁₈ BEH analytical column (100 mm × 2.1 mm i.d.; 1.7 μm), whilst the gradient elution mode was employed using water:methanol mobile phase with addition of volatile organic acid. The concentration of organic acids in the mobile phase was optimised within the range of 0.01–0.1% (v/v). High sensitivities were achieved in positive (10.2-16.8 fmol/inj.) and negative ion detection mode (102.1-168.1 fmol/inj.), through accurate and complex tuning of MS parameters. The UHPLC-ESI-MS/MS method was validated in terms of linearity (>0.9997; >0.9990), range (0.02–2.40 mg L⁻¹; 0.15-24.00 mg L⁻¹), LOD (3.0–4.8 μg L⁻¹; 30.1–48.0 μg L⁻¹), LOQ (9.9–15.8 μg L⁻¹; 150.5-240.0 μg L⁻¹), intra-day precision (4.4-7.1% RSD; 3.3-5.1% RSD), accuracy (94.06-113.7%; 89.5-108.4%), retention time repeatability (0.0-0.5% RSD; 0.0-0.6% RSD), and peak area repeatability (1.2-4.0% RSD; 2.4-3.5% RSD) for positive and negative ion detection modes, respectively. The statistical comparison of the quantitative results obtained in positive and negative ion detection mode was performed.     

Improved Adhesion, Growth and Maturation of Vascular Smooth Muscle Cells on Polyethylene Grafted with Bioactive Molecules and Carbon Particles

High-density polyethylene (PE) foils were modified by an Ar⁺ plasma discharge and subsequent grafting with biomolecules, namely glycine (Gly), polyethylene glycol (PEG), bovine serum albumin (BSA), colloidal carbon particles (C) or BSA and C (BSA + C). As revealed by atomic force microscopy (AFM), goniometry and Rutherford Backscattering Spectroscopy (RBS), the surface chemical structure and surface morphology of PE changed dramatically after plasma treatment. The contact angle decreased for the samples treated by plasma, mainly in relation to the formation of oxygen structures during plasma irradiation. A further decrease in the contact angle was obvious after glycine and PEG grafting. The increase in oxygen concentration after glycine and PEG grafting proved that the two molecules were chemically linked to the plasma-activated surface. Plasma treatment led to ablation of the PE surface layer, thus the surface morphology was changed and the surface roughness was increased. The materials were then seeded with vascular smooth muscle cells (VSMC) derived from rat aorta and incubated in a DMEM medium with fetal bovine serum. Generally, the cells adhered and grew better on modified rather than on unmodified PE samples. Immunofluorescence showed that focal adhesion plaques containing talin, vinculin and paxillin were most apparent in cells on PE grafted with PEG or BSA + C, and the fibres containing α-actin, β-actin or SM1 and SM2 myosins were thicker, more numerous and more brightly stained in the cells on all modified PE samples than on pristine PE. An enzyme-linked immunosorbent assay (ELISA) revealed increased concentrations of focal adhesion proteins talin and vinculin and also a cytoskeletal protein β-actin in cells on PE modified with BSA + C. A contractile protein α-actin was increased in cells on PE grafted with PEG or Gly. These results showed that PE activated with plasma and subsequently grafted with bioactive molecules and colloidal C particles, especially with PEG and BSA + C, promotes the adhesion, proliferation and phenotypic maturation of VSMC.     

Anodic stripping voltammetric measurement of trace heavy metals at antimony film carbon paste electrode

The antimony film carbon paste electrode (SbF-CPE) was prepared in situ on the carbon paste substrate electrode as a “mercury-free” electrochemical sensor. Its aptitude for measuring some selected trace heavy metals has been demonstrated in combination with square-wave anodic stripping voltammetry in non-deaerated model solutions of 0.01 M hydrochloric acid with pH 2. Some important operational parameters, such as deposition potential, deposition time, and concentration of antimony ions were optimized, and the electroanalytical performance of the SbF-CPE was critically compared with both bismuth film carbon paste electrode (BiF-CPE) and mercury film carbon paste electrode (MF-CPE) using Cd(II) and Pb(II) as test metal ions. In comparison with BiF-CPE and MF-CPE, the SbF-CPE exhibited superior electroanalytical performance in more acidic medium (pH 2) associated with favorably low hydrogen evolution, improved stripping response for Cd(II), and moreover, stripping signals corresponding to Cd(II) and Pb(II) at the SbF-CPE were slightly narrower than those observed at bismuth and mercury counterparts. In addition, the comparison with antimony film electrode prepared at the glassy carbon substrate electrode displayed higher stripping current response recorded at the SbF-CPE. The newly developed sensor revealed highly linear behavior in the examined concentration range from 5 to 50 μg L⁻¹, with limits of detection (3σ) of 0.8 μg L⁻¹ for Cd(II), and 0.2 μg L⁻¹ for Pb(II) in connection with 120 s deposition step, offering good reproducibility of ±3.8% for Cd(II), and ±1.2% for Pb(II) (30 μg L⁻¹, n = 10). Preliminary experiments disclosed that SbF-CPE and MF-CPE exhibit comparable performance for measuring trace concentration levels of Zn(II) in acidic medium with pH 2, whereas its detection with BiF-CPE was practically impossible. Finally, the practical applicability of SbF-CPE was demonstrated via measuring Cd(II) and Pb(II) in a real water sample.     

The comprehensive in vitro evaluation of eight different calcium phosphates: Significant parameters for cell behavior

Eight different calcium phosphate nanoparticles, namely bovine bone bioapatite calcined at 500, 600, and 700°C, Mg-doped brushite, fluorinated calcium phosphate, Ca-deficient hydroxyapatite, hydroxyapatite, and tricalcium phosphate, were characterized employing physico-chemical methods. Their cytocompatibility was evaluated under human osteoblast-like cell line MG-63 culture conditions in elution media and via the direct interaction of cells with calcium phosphate nanoparticles. The main objective was to determine the correlation of the cell indices with the differently determined physical and chemical parameters of the calcium phosphates. Chemical composition, which contributes toward pH changes, and the calcium ion concentration in the medium appear to make up particularly significant factors; moreover, it was proved that the number of material types represents a further important aspect. In the case of a large number of material types, almost no correlation was determined between the analyzed parameters; however, in the case of a small number of apatite types, several positive correlations were found. It can be concluded that it is not possible to identify any monitored parameters that had a major impact on cell behavior or, at least, such an effect which can be generalized. It appears more likely that cell behavior is affected by the interplay of various parameters.     

Temporal trends of synthetic musk compounds in mother's milk and associations with personal use of perfumed products

We analyzed two nitro musks (musk xylene and musk ketone) and five polycyclic musks (HHCB, AHTN, ADBI, ATII, and AHDI) in mother's milk from primiparae women (N = 101) living in Uppsala County, Sweden, 1996-2003. Possible temporal trends in musk concentrations and associations with lifestyle/medical factors, such as use of perfumed products during pregnancy were studied. HHCB showed the highest median concentration (63.9 ng/g lipid) followed by AHTN (10.4 ng/g) and musk xylene (MX) (9.5 ng/g). Concentrations of the other substances were, in most cases, below the quantification limit (2.0-3.0 ng/g). Women with a high use of perfume during pregnancy had elevated milk concentrations of HHCB, and elevated concentrations of AHTN were observed among women reporting use of perfumed laundry detergent. This strongly suggests that perfumed products are important sources of musk exposure both among the mothers and the nursed infants. Concentrations of AHTN and MX declined significantly between 1996 and 2003, suggesting a decline in the industrial use of the compounds in consumer products, or alterations in the consumer use pattern of perfumed products. No temporal trend in HHCB concentrations was seen. The lack of toxicity data makes it difficult to generalize about the safety of musk exposure of breast-fed infants.     

The Incorporation of Curcuminoids in Gamma-Cyclodextrins Improves Their Poor Bioaccessibility,Which Is due to Both Their Very Low Incorporation into Mixed Micelles and Their Partial Adsorption on Food

Scope

Turmeric curcuminoids mainly consist of curcumin (CUR), demethoxycurcumin (dCUR), and bisdemethoxycurcumin (bdCUR). CUR displays low bioavailability, partly due to poor solubilization in the intestinal lumen during digestion, while data for dCUR and bdCUR are scarce. The study aims to investigate the bioaccessibility of curcuminoids from turmeric extracts or from gamma-cyclodextrins, considering potential interactions with food.

Methods and results

Using an in vitro digestion model (correlation with CUR bioavailability: r = 0.99), the study shows that curcuminoid bioaccessibility from turmeric extract without food is low: bdCUR (11.5 ± 0.6%) > dCUR (1.8 ± 0.1%) > CUR (0.8 ± 0.1%). Curcuminoids incorporated into gamma-cyclodextrins display higher bioaccessibilities (bdCUR: 21.1 ± 1.6%; dCUR: 14.3 ± 0.9%; CUR: 11.9 ± 0.7%). Curcuminoid bioaccessibility is highest without food (turmeric extract: 2.0 ± 0.1%; gamma-cyclodextrins: 12.4 ± 0.8%) and decreases with a meat- and potato-based meal (turmeric extract: 1.1 ± 0.2%; gamma-cyclodextrins: 2.4 ± 0.3%) or a wheat-based meal (turmeric extract: 0.1 ± 0.0%; gamma-cyclodextrins: 0.3 ± 0.1%). Curcuminoids exhibit low (<10%) incorporation efficiencies into synthetic mixed micelles (bdCUR > dCUR > CUR).

Conclusions

bdCUR and dCUR show greater bioaccessibilities versus CUR. Food diminishes curcuminoid bioaccessibility, likely by adsorption mechanisms. Gamma-cyclodextrins improve curcuminoid bioaccessibility.     

On the role of 2,3-dihydro-3,5-dihydroxy-6-methyl-(4<Emphasis Type="Italic">H</Emphasis>)-pyran-4-one in antioxidant capacity of prunes

Despite available reports on phenolic composition and antioxidant capacity (AOC) of fresh plums and prunes, there is a scarcity of published knowledge on the antioxidants formed and/or released during the drying process in the literature. To evaluate the compounds participating in reducing capacity of prunes, we compared aqueous and methanol extracts of fresh plums, commercial prunes and home-made prunes prepared at different drying temperatures using an HPLC method with amperometric detection (HPLC-ECD). The prunes dried at high temperature (90 °C, 18 h) in kitchen or laboratory oven with restricted ventilation gave up to 3.3 times higher electrochemical capacity (EC) than fresh plums (dry matter; P. domestica cv. Domestica) in dependence on production protocol. Drying at 60 °C (low-temperature drying) for 18 h did not change the EC significantly. Yet, lower EC was found in commercial tenderized prunes with sorbate; they were by a factor of 1.1–8.2 lower in EC than the prepared low-temperature prunes. The principle responsible for the increase in EC in the prunes prepared at high temperatures is 2,3-dihydro-3,5-dihydroxy-6-methyl-(4H)-pyran-4-one (DDMP). It was not detected until 74 °C was set during isothermal 18 h drying or until 6 h of drying passed at 90oC drying. The ultimate acceptable dwell-time for the preparation of conveniently eatable prunes dried at 90oC under the conditions used was assessed to 12 h. The EC of plums and prunes as well as the role of DDMP was confirmed by the use of several methods for the assessment of AOC-DPPH^• assay, β-carotene bleaching method, Oxipres test and Schaal oven test.     

Fluorine containing self‐crosslinking acrylic latexes with reduced flammability and their application as polymer binders for heterogeneous cation‐exchange membranes

In this study, self‐crosslinking core–shell latexes comprising copolymerized perfluorethyl groups and a novel flame retardant based on phosphazene derivative were prepared by the semi‐continuous non‐seeded emulsion polymerization of 2,2,2‐trifluorethyl methacrylate, methyl methacrylate, butyl acrylate, methacrylic acid, and hexaallylamino‐cyclo‐triphosphazene as main monomers. For interfacial crosslinking, diacetone acrylamide was copolymerized into the shell layer of latex particles to provide sites for subsequent reaction with adipic acid dihydrazide. The heterogeneous cation‐exchange membranes were obtained by dispersing commercial strong acid cation‐exchange resin powder in the latex binder and casting the mixture followed by keto‐hydrazide crosslinking reaction. It was found that the increased concentration of fluorine atoms and phosphazene units in the macromolecular structure of interfacially crosslinked emulsion polymers resulted in a significant enhancement of their flame resistance and shape stability in aqueous environment. Moreover, the easily prepared heterogeneous cation‐exchange membranes based on latexes with higher amounts of fluorine and phosphazene units were shown to exhibit satisfactory physicochemical and electrochemical properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45467.     

Antibacterial modification of nylon-6 nanofibers: structure,properties and antibacterial activity.

Antibacterial nylon 6 (PA6) nanofibers have been prepared in one-step procedure using Nanospider technology. Chlorhexidine (CHX), 1-dodecyltrimethylamonium bromide (DTAB) and benzyltrimethylamonium bromide (BTAB) have been used as antibacterial agents. Samples were characterized by a series of analytical and testing methods to investigate the surface chemistry, zeta potential, structure, morphology, phase composition, mechanical properties and antibacterial activity. Experimental characterization has been combined with molecular modeling to analyze the interaction of nanofibers with modifying molecules for better understanding the effect of nanofibers modification on their properties. Antibacterial modification of PA6 led to significant changes of zeta potential (from -31 mV for PA 6 up to -49 mV for PA6/BTAB), changes in phase composition (decrease of alpha phase content and increase of gamma phase content for PA6/BTAB and PA6/CHX) and to significant increase of fiber diameter for PA6/BTAB. Antibacterial modification resulted in the straightening of nanofibers and to higher permeability of nanofiber textile for all investigated samples. Tensile tests showed the the increase of Young modulus for all the investigated samples. All the modified samples: PA6/DTAB, PA6/BTAB and PA6/CHX exhibit good antibacterial activity.