Attenuation statistics in Italy as measured by the SIRIO satellite during its five year lifetime

The results of a campaign of attenuation measurements carried out by means of the Italian satellite SIRIO at the two frequencies 11.6 and 17.8 GHz are presented. The campaign lasted five years (1978- 1982) and yielded almost continuous measurements at the lower frequency (acquired in three Italian stations) and measurements for a considerable fraction of time at the higher one (acquired in two of the three stations). The major aim of these measurements was to acquire long-term statistics to be employed in future earth-space radiolink design. This objective has been fully accomplished, owing to the very long life of the satellite, and the acquired data have been already utilized, properly extrapolated in frequency, for designing the domestic satellite system Italsat planned to start in 1987. Year-to-year and site-to-site variation have been found to be very high. Conversely the ratio between equiprobable values of attenuation at the two frequencies has proved to be very similar in the two stations and rather stable across the attenuation range.     

Extending the lifetime of the running electrolyte in capillary electrophoresis by using additional compartments for external electrolysis

The use of two additional reservoirs to accommodate the electrodes of the power source is proposed to improve the stability of the running electrolyte in capillary electrophoresis. The basic idea is to use salt bridges to connect those reservoirs to the ones containing the capillary ends. Although simple, there are several issues that can be considered in the design and implementation of such system in order to prevent undesired transference of material between the electrolysis and the main reservoirs. The use of a sealed electrolysis reservoir without a gas phase, the use of materials that ensure volume stability, and the use of bridges as long as possible are three basic directions. A compromise is involved in the dimensions of the sectional area of the bridge, because a small area diminishes the amount of a species transferred by diffusion but leads to an undesirable increase of the electrical field during the electrophoretic running. Thus, a bridge composed of a main wide-bore tube connected to a small-bore capillary seems to give the best performance for practical use. A simple electrolysis-separated system was adapted to a preexisting capillary electrophoresis system, and its performance was evaluated with a mixture of tartaric, malic, and succinic acids that was separated in sodium benzoate solution (pH 5.5) using the original equipment and the modified one. Due to the water electrolysis and the small buffering capacity of the electrolyte, there was a significant pH change and consequently changes in the effective mobilities of the analytes and loss of resolution after a few runs using the original equipment. Using the electrolysis-separated system, no significant change in the migration time and resolution was observed even after 15 runs. Besides the freedom to prepare running electrolytes with electroactive species or unbuffered solution, high throughput and the use of small reservoirs, such as the ones used in microfluidic devices, are the main advantages of the system.     

Fully refocused multi-shot spatiotemporally encoded MRI: robust imaging in the presence of metallic implants

Object

An approach has been recently introduced for acquiring arbitrary 2D NMR spectra or images in a single scan, based on the use of frequency-swept RF pulses for the sequential excitation and acquisition of the spins response. This spatiotemporal-encoding (SPEN) approach enables a unique, voxel-by-voxel refocusing of all frequency shifts in the sample, for all instants throughout the data acquisition. The present study investigates the use of this full-refocusing aspect of SPEN-based imaging in the multi-shot MRI of objects, subject to sizable field inhomogeneities that complicate conventional imaging approaches.

Materials and methods

2D MRI experiments were performed at 7 T on phantoms and on mice in vivo, focusing on imaging in proximity to metallic objects. Fully refocused SPEN-based spin echo imaging sequences were implemented, using both Cartesian and back-projection trajectories, and compared with k-space encoded spin echo imaging schemes collected on identical samples under equal bandwidths and acquisition timing conditions.

Results

In all cases assayed, the fully refocused spatiotemporally encoded experiments evidenced a ca. 50?% reduction in signal dephasing in the proximity of the metal, as compared to analogous results stemming from the k-space encoded spin echo counterparts.

Conclusion

The results in this study suggest that SPEN-based acquisition schemes carry the potential to overcome strong field inhomogeneities, of the kind that currently preclude high-field, high-resolution tissue characterizations in the neighborhood of metallic implants.     

Alginate and alginate/hyaluronic acid membranes generated by electrospinning in wet conditions: Relationship between solution viscosity and spinnability

The methodology to create alginate and alginate/hyaluronic acid membranes, which involves wet conditions electrospinning, is presented in this paper. The wet conditions allow simultaneously to work in water solutions avoiding the toxic solvents and to obtain crosslinked alginate. An accurate rheological characterization of all solutions examined is performed. By optimizing the electrospinning parameters, it is possible to obtain alginate membranes with homogeneous nanofibers and a narrow diameter distribution (i.e., around 100 nm) as well as alginate/hyaluronic acid membranes characterized by a network of bimodal distribution of the dimensions, namely nanofibers with a diameter comparable to the ones of the alginate membrane, in which are blocked microfibers with a ribbon like appearance, as observed in the SEM images. In order to facilitate the electrospinning process, poly(ethylene oxide) is added to the solutions and then removed after membranes preparation, as demonstrated by the differential scanning calorimetry results, obtaining membranes made up only biopolymers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46390.     

Shape-Based Retrieval of Construction Site Photographs

Digital photographs of construction site activities are gradually replacing their traditional paper based counterparts. Existing digital imaging technologies in hardware and software make it easy for site engineers to take numerous photographs of “interesting” processes and activities on a daily basis. The resulting photographic data are evidence of the “as-built” project, and can therefore be used in a number of project life cycle tasks. However, the task of retrieving the relevant photographs needed in these tasks is often burdened by the sheer volume of photographs accumulating in project databases over time and the numerous objects present in each photograph. To solve this problem, the writers have recently developed a number of complementary techniques that can automatically classify and retrieve construction site images according to a variety of criteria (materials, time, date, location, etc.). This paper presents a novel complementary technique that can automatically identify linear (i.e., beam, column) and nonlinear (i.e., wall, slab) construction objects within the image content and use that information to enhance the performance of the writers’ existing construction site image retrieval approach.     

Flame-synthesized LaCoO3-supported Pd: 2. Catalytic behavior in the reduction of NO by H2 under lean conditions

A 0.5 wt% Pd/LaCoO₃, prepared by flame-spray pyrolysis (FP), was tested as catalyst for the low-temperature selective reduction of NO by H₂ in the presence of excess O₂. In particular, the effect of the precalcination and prereduction temperature on catalytic activity was compared with that of a similar Pd/LaCoO₃ sample prepared by impregnation with a Pd solution of FP-prepared LaCoO₃. The FP-made catalyst allowed full NO conversion at 150 °C, with 78% selectivity to N₂, thus outperforming the catalytic behavior of the corresponding sample prepared by impregnation. The higher activity of the FP-made catalyst has been attributed to the formation of segregated Co metal particles, not present in the impregnated sample, formed during the precalcination at 800 °C, followed by reduction at 300 °C. Two reaction mechanisms can be deduced from the temperature-programmed experiments. The first of these, occurring at lower temperatures, indicates cooperation between the Pd and Co metal particles, with formation of active nitrates on cobalt, successively reduced by hydrogen spillover from Pd. The second, occurring at higher temperature, allows 50% conversion of NO, with >90% selectivity to N₂, and involves N adatoms formed by dissociative NO adsorption over Pd. Prereduction at 600 °C led to a slight increase in catalytic activity, due to the formation of a PdCo alloy, which is more stable on reoxidization compared with Pd alone. Moreover, the cooperative reaction mechanism seems to be favored by the proximity of Co and Pd in metal particles.     

Learning fuzzy rules with tabu search-an application to control

We present an approach for the automatic definition of the fuzzy rules for a fuzzy controller based on the use of the tabu search (TS) scheme. We show also how the application of the TS process to the learning of a fuzzy rule base can be improved using heuristic symbolic meta rules. The paper is divided in two parts. The first part presents an introduction to TS and different learning schemes which can be used to apply it for the determination of the fuzzy control rules. The second part illustrates the application of the proposed techniques to a specific control problem-the parking of a truck and trailer. In particular, Section V illustrates the definition of a rule base for a static fuzzy controller, while Section VI presents the construction of an adaptive parking controller     

Lymphotoxin alphabeta is expressed on recently activated naive and Th1-like CD4 cells but is down-regulated by IL-4 during Th2 differentiation

Lymphotoxin (LT) is a cytokine that orchestrates lymphoid neogenesis and formation of germinal center reactions. LT exists as a membrane heterotrimer of alpha and beta subunits and is secreted as a homotrimer, LTalpha3. Using LTbetaR.Fc, expression of LTalphabeta on CD4 T cell subsets was investigated in a TCR transgenic model. LTalphabeta was evident 24-72 h after activation of naive T cells with specific Ag, and declined thereafter. Early expression was independent of IFN-gamma and IL-12, however, IL-12 prolonged expression. LTalphabeta was reinduced within 2-4 h after Ag restimulation, but declined by 24 h regardless of IL-12 or IFN-gamma priming. Exposure of naive T cells to IL-4 did not affect early LTalphabeta expression at 24 h, but resulted in subsequent down-regulation. IL-4-differentiated Th2 effectors did not re-express LTalphabeta, and LTalphabeta was transiently found on Th1 clones but not Th2 clones. LTalpha3 and TNF were immunoprecipitated from supernatants and lysates of IL-12 primed cells but not IL-4 primed cells. These studies demonstrate that LTalphabeta is expressed by activated naive CD4 cells, unpolarized IL-2-secreting effectors, and Th1 effectors. In contrast, loss of surface LTalphabeta and a lack of LTalpha3 and TNF secretion is associated with prior exposure to IL-4 and a Th2 phenotype.