Effect of acetylation on rheological properties of fish protein isolates during heating

Rheological properties of concentrated dispersions of muscle Pollack proteins acetylated to different degrees as a function of temperature have been studied. The character of viscosity changes of the partially acetylated isolates is almost identical with that of unacetylated protein. However, the temperatures corresponding to viscosity maxima increase proportionally to the degree of acetylation. A total acetylation of the free lysine ?-amino groups of Pollack protein results in a significant increase in the critical concentration and/or temperature of the sol-gel transition.     

Phase equilibria in the α-Ti-Al-Si region of the Ti-Si-Al system

An experimental investigation of the phase relations in the titanium (Ti)-aluminum (Al)-silicon (Si) system was undertaken by differential thermal analysis, x-ray diffraction, metallography, and microprobe analysis. The present measurements when combined with those from an earlier investigation at this laboratory provide data for 56 alloy compositions in the Ti-Al-Si system. The combined results allowed the construction of a solidus projection, a melting diagram including both solidus and liquidus, partial isothermal sections at 1270 °C and 1250 °C, three isopleths with a constant percentage of one or another component, and a reaction scheme.     

An ensemble-based method for linear feature extraction for two-class problems

In this paper we propose three variants of a linear feature extraction technique based on Adaboost for two-class classification problems. Unlike other feature extraction techniques, we do not make any assumptions about the distribution of the data. At each boosting step we select from a pool of linear projections the one that minimizes the weighted error. We propose three different variants of the feature extraction algorithm, depending on the way the pool of individual projections is constructed. Using nine real and two artificial data sets of different original dimensionality and sample size we compare the performance of the three proposed techniques with three classical techniques for linear feature extraction: Fisher linear discriminant analysis (FLD), Nonparametric discriminant analysis (NDA) and a recently proposed feature extraction method for heteroscedastic data based on the Chernoff criterion. Our results show that for data sets of relatively low-original dimensionality FLD appears to be both the most accurate and the most economical feature extraction method (giving just one-dimension in the case of two classes). The techniques based on Adaboost fare better than the classical techniques for data sets of large original dimensionality.

---

Inner estimation of the united solution set of interval linear algebraic system

It is shown that an algebraic interval solution of interval linear algebraic systems with matrix composed of “reverse” interval elements of the input matrix is a maximum inner estimation for the mited solution set in the sense of inclusion.     

Methods for correction of selectivity of N-(2-sulfoethyl)chitosan-based materials towards platinum(IV) and palladium(II) ions

In this paper, we report methods for correction of selectivity of sorbents based on N-(2-sulfoethyl)chitosan towards platinum(IV) and palladium(II) in HCl solutions. The common method for correction of selectivity of the sorbents is variation of their modification degree with complexing groups. An increase in the degree of sulfoethylation of the chitosan leads to the significant increase in selectivity of sorption of palladium(II) over platinum(IV). Application of the N-(2-sulfoethyl)chitosan with the highest degree of sulfoethylation allows for selective separation palladium(II) from platinum(IV) (рН = 5.0). Palladium is quantitatively desorbed from the surface of the N-(2-sulfoethyl)chitosans by 3.5 mol/dm³ solution of HCl.     

Crosslinking of addition copolymers from tricyclononenes bearing (CH3)3Si‐ and (C2H5O)3Si‐groups as a modification of membrane gas separation materials

Here, we report the synthesis and the study of gas‐transport properties of crosslinked highly permeable copolymers from Si‐containing norbornene derivatives. The initial high‐molecular‐weight copolymers were prepared via addition copolymerization of 3‐trimethylsilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSi1) with 3‐triethoxysilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSiOEt) in good or high yields using a Pd‐catalyst. The obtained copolymers included up to 10 mol% of TCNSiOEt units bearing reactive Si–O–C‐containing substituents. The crosslinking was readily realized by using simple sol–gel chemistry in the presence of Sn‐catalyst. The formed crosslinked copolymers were insoluble in common organic solvents. Permeability coefficients of various gases (He, H₂, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈, n‐C₄H₁₀) in these copolymers before and after crosslinking were determined and the influence of the incorporated TCNSiOEt units as well as the crosslinking on gas transport properties were established. As a result, it was found that only a small reduction of gas‐permeability was observed when TNCSiOEt units were incorporated into the main chains, and the copolymers were crosslinked. At the same time, the selectivity for C₄H₁₀/CH₄ pair was increased. The suggested approach has allowed obtaining crosslinked polymers from Si‐containing monomers without a loss of the main membrane characteristics. POLYM. ENG. SCI., 59:2502–2507, 2019. © 2019 Society of Plastics Engineers     

The Rational Use of Water Resources in the Strategy of Industry 4.0

The article substantiates that the transformation of the world economy associated with Industry 4.0 leads to a significant change in the way resources are used and affects the possibility of implementing the concept of sustainable development. In this regard, a combined analysis of the concept of new industrial development and the concept of sustainable development, as well as an assessment of the current practice of their implementation is required. In this paper, such an analysis was carried out on the example of water resources management. The paper proposes a methodology for assessing the correlation of water management and industrial development levels of regions. This includes the use of both traditional statistical approaches to the analysis of the level of development of economic systems, and elements of data mining. The neural network is constructed in order to estimate the forecasted values of the water intensity of the gross regional product when the indicators of the level of industrial development of the regions change. The results show that the most significant indicators for changing water intensity include advanced production technologies used, the share of value-added to high-tech industries, and innovative activities of organisations.

     

Antagonistic effects on mechanical properties of microfibrillar composites with dual reinforcement: Explanation by FEA model of soft interface

Nanofillers (NF) in microfibrillar composites support melt‐drawing and may lead to improved performance. However, antagonistic effects have also been found. The deterioration of mechanical properties by drawing in the presence of NF, as found by other authors in analogous undrawn systems, has not yet been explained. Experiments indicating the importance of NF migration between the HDPE matrix and the PA6 fibrils in the course of drawing have led to a tentative conclusion of changed crystallinity in the interfacial area resulting in a layer with reduced modulus. This was confirmed by the finite element analysis considering the formation of a “soft” interface as a result of reduced content of HDPE spherulites at the fiber surfaces. The results show a marked impact of this phenomenon on modulus. This original concept presents a basis for explaining some antagonistic effects in multicomponent polymer systems and a tool for the more rational design of composite materials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44712.     

Sorption isotherms of metal ions onto an N-(2-sulfoethyl)chitosan-based material from single- and multi-component solutions

The scope of work is to study the mutual influence of metal ions during their sorption by sulfoethylated chitosan. The sorption isotherms of metal ions from single- and multi-component solutions are obtained. The sorption capacity of the sorbent towards Ag(I) and Cu(II) is revealed to be 1.63 and 1.41 mmol/g in single-, and 1.40 and 0.85 mmol/g in five-component solution. By comparing the affinity parameter and capacity of sulfoethylated chitosan towards ions in single- and multi-component solutions, it is concluded that Ag(I) and Cu(II) ions suppress the sorption of cobalt(II), nickel(II), zinc(II), cadmium(II), magnesium(II), calcium(II), strontium(II), barium(II), manganese(II) and lead(II).