Auto synchronous bandpass filter based on indium-doped CdS

Samples were grown on glass substrates of CdS doped with different levels of indium via the chemical bath technique. The samples obtained were optically characterized to determine their band-gap. A capacitor of parallel plates is constructed with the CdS samples placed between the plates; afterward, light with energy above the band-gap is used to generate carriers in the CdS to modify its dielectric properties and therefore the capacitance. The sample that causes greater current through the capacitor is used to form part of the tank circuit of a bandpass filter because this tank circuit determines the frequency of resonance or passage of the filter, thus forming a bandpass filter whose resonance frequency depends on the intensity of light that impinges on the CdS sample. Finally, the frequency responses of the filter when the sample is not illuminated compared to that when it is illuminated are studied to demonstrate a filter whose resonance frequency can be effectively controlled by light via the use of indium-doped CdS.     

Large scale cathodic exfoliation of graphite using deep eutectic solvent and water mixture

A short-time and low-cost synthesis route was used to produce large lateral size (from 2 to 15 μm) from monolayers to few layers of graphene by a two-step process of electrochemical exfoliation with a deep eutectic solvent in a mixture with water that can be reused, and ultrasonic bath. The graphene was characterized by SEM, TEM, AFM, Raman and electrochemical activity. During the electrochemical exfoliation, high expanded graphene particles were obtained and these were dispersed in a mixture of water with 5%wt ethylene glycol by an ultrasonic bath in order to complete the exfoliation process. An enhancement of the electrical conductivity of these dispersions was obtained with the increase of graphene concentration, 0.38 mg/mL, which best result was achieved with 30 wt% water and a DC voltage of 10 V. It was possible to add a conductive layer to a glass substrate with the graphene obtained and Tyndall effect was observed.     

Exploring the recovery of fatigue damage in bituminous mixtures: the role of rest periods

Recovery capability of bituminous materials plays a significant role in the development of new technologies for extending the service life of asphalt pavements. This capability originates from various phenomena such as thixotropy, cooling, relaxation of hardening, or healing. However, their real effect on mechanical response is not clear. This article aims to investigate how rest periods (RPs) available between traffic loads can contribute to the damage recovery of bituminous materials. For this purpose, different types and durations of RPs were applied during the laboratory evaluation of fatigue resistance of these materials using the University of Granada Fatigue Asphalt Cracking Test method. The results indicate that the addition of RPs to the loading regime could lead to an extension in the fatigue life of bituminous materials. Additionally, an increase in the RP duration showed a positive impact on the resistance of the materials against cyclic loading. Nonetheless, these benefits are not only related to the recovery of lost properties during RPs, but also a growth in the amount of plastic deformations as a result of the applying RPs could delay the appearance of damages (i.e. cracking). Consequently, the bituminous material can tolerate a higher number of load cycles during fatigue test.     

Temporary feeding shocks increase the productivity in a continuous biohydrogen-producing reactor

Continuous hydrogen production stability and robustness by dark fermentation were comprehensively studied at laboratory scale. Continuous bioreactors were operated at two different hydraulic retention times (HRT) of 6 and 10 h. The reactors were subjected to feeding shocks given by decreases in the HRT, and therefore the organic loading increases, during 6 and 24 h. Results indicated that the H₂ productivity was significantly improved by the temporary organic shock loads, increasing the hydrogen production rate up to 40%, compared to the rate obtained at the steady-state condition. Besides, it was observed that after the shock load, the stability of the reactor (measured as the hydrogen production rate) was recovered attaining the values observed before the feeding shocks. The bioreactor operated at shorter HRT (6 h) showed better H₂ productivity (17.3?±?1.1 L H₂/L-d) in comparison with the other one operated at 10-h HRT (12.4?±?1.6 L H₂/L-d).     

Privacy protection vs. utility in visual data

Multimedia Tools and Applications - Ubiquitous and networked sensors impose a huge challenge for privacy protection which has become an emerging problem of modern society. Protecting the privacy of...     

Precise segmentation of the bulbar conjunctiva for hyperaemia images

Hyperaemia is an excess of blood in a tissue that causes the appearance of an unusual red hue in the affected area. It is a common occurrence in the bulbar conjunctiva, where it can be related to multiple pathologies, such as conjunctivitis or dry eye syndrome. Specialists grade hyperaemia by means of a tedious, subjective, non-repeatable and time-consuming process. These drawbacks can be solved with the automatisation of the process by means of image processing techniques. The automatic segmentation of the conjunctiva is an important part of the process, as it ensures the absence of noise in posterior stages of the methodology. However, there are several issues of illumination and focus in the input videos that difficult the process. In this work, several segmentation algorithms are proposed and compared in order to obtain an accurate location of the bulbar conjunctiva.