Catalyst deactivation in the gas phase destruction of nitrogen-containing organic compounds using TiO2/UV–VIS

Possible application of the TiO₂/UV–VIS photocatalytic process in the destruction of nitrogen-containing malodorous compounds was evaluated. Pyridine (C₅H₅N), propylamine (C₃H₇NH₂) and diethylamine (C₄H₁₀NH) were photodegraded in the presence and in the absence of oxygen. Degradation of nitrogen-containing organic compounds was confirmed by mass balance taking into consideration NH₄⁺ and NO₃⁻ ions trapped at the TiO₂ surface. Photocatalytic deactivation was observed in all cases. On-line mass spectrometry was used to identify byproducts in the gas phase formed during the degradation process. GC–MS analysis of the dichloromethane-extract of aqueous species leached from the surface of deactivated catalyst, as well as pre-concentration in a Tenax column were used to identify intermediates in the gas phase. These byproducts are considered to be the major ones responsible for deactivation of TiO₂.     

Behavioural models for distributed Fractal components

This paper presents a formal behavioural specification framework for specifying and verifying the correct behaviour of distributed Fractal components. The first contribution is a parameterised and hierarchical behavioural model called pNets that serves as a low-level semantic framework for expressing the behaviour of various classes of distributed languages and as a common internal format for our tools. Then, we use this model to define the generation of behavioural models for applications ranging from sequential Fractal components, to distributed objects, and finally to distributed components. Our models are able to characterise both functional and non-functional behaviours and the interaction between the two concerns. Finally, this work has resulted in the development of tools allowing the non-expert programmer to specify the behaviour of his components and (semi)automatically verify properties of his application.     

Adventitial Tertiary Lymphoid Organs as Potential Source of MicroRNA Biomarkers for Abdominal Aortic Aneurysm

Abdominal aortic aneurysm (AAA) is an inflammatory disease associated with marked changes in the cellular composition of the aortic wall. This study aims to identify microRNA (miRNA) expression in aneurysmal inflammatory cells isolated by laser microdissection from human tissue samples. The distribution of inflammatory cells (neutrophils, B and T lymphocytes, mast cells) was evaluated in human AAA biopsies. We observed in half of the samples that adventitial tertiary lymphoid organs (ATLOs) with a thickness from 0.5 to 2 mm were located exclusively in the adventitia. Out of the 850 miRNA that were screened by microarray in isolated ATLOs (n = 2), 164 miRNAs were detected in ATLOs. The three miRNAs (miR-15a-3p, miR-30a-5p and miR-489-3p) with the highest expression levels were chosen and their expression quantified by RT-PCR in isolated ATLOs (n = 4), M1 (n = 2) and M2 macrophages (n = 2) and entire aneurysmal biopsies (n = 3). Except for the miR-30a-5p, a similar modulation was found in ATLOs and the two subtypes of macrophages. The modulated miRNAs were then evaluated in the plasma of AAA patients for their potential as AAA biomarkers. Our data emphasize the potential of miR-15a-3p and miR-30a-5p as biomarkers of AAA but also as triggers of ATLO evolution. Further investigations will be required to evaluate their targets in order to better understand AAA pathophysiology.     

Hydraulic behaviour of a representative structural volume for containment buildings

For particular structures like containment buildings of nuclear power plants, the study of the hydraulic behaviour is of great concern. These structures are indeed the third barrier used to protect the environment in case of accidents. The evolution of the leaking rate through the porous medium is closely related to the changes in the permeability during the ageing process of the structure. It is thus essential to know the relation between concrete degradation and the transfer property when the consequences of a mechanical loading on the hydraulic behaviour have to be evaluated. A chained approach is designed for this purpose. The mechanical behaviour is described by an elastic plastic damage formulation, where damage is responsible for the softening evolution while plasticity accounts for the development of irreversible strains. The drying process is evaluated according to a non-linear equation of diffusion. From the knowledge of the damage and the degree of saturation, a relation is proposed to calculate the permeability of concrete. Finally, the non-homogeneous distribution of the hydraulic conductivity is included in the hydraulic problem which is in fact the association of the mass balance equation for gas phase and Darcy law. From this methodology, it is shown how an indicator for the hydraulic flows can be deduced.     

A versatile access to new halogenated 7-azidocoumarins for photoaffinity labeling: Synthesis and photophysical properties

A versatile methodology for the synthesis of 6/8-halogenated 7-aminocoumarins from the corresponding 7-hydroxy analogs using Pd-catalyzed amination reaction as the key step is presented. Further readily conversion into 7-azidocoumarins was performed and the resulting aryl azides proved higher stability and reactivity than the corresponding non-halogenated parent compound. These new compounds may thus constitute attractive scaffolds for designing novel photoaffinity reagents for various challenging bio-labeling applications.     

Potential of ionic liquids for VOC absorption and biodegradation in multiphase systems

This work aims to evaluate the feasibility of using imidazolium ionic liquids (ILs) in the design of multiphase bioreactors for the removal of volatile organic compounds (VOCs). The IL affinity for three model VOCs (dimethyl sulfide, dimethyl disulfide and toluene) was evaluated by means of the dimensionless partition coefficient (K). It was observed that ILs showed K values comparable to typical liquid solvents used in multiphase bioreactors for VOC biodegradation (K values ranged from 0.009 to 0.011, 0.0012 to 0.0013 and 0.00061 to 0.00096 for dimethyl sulfide, dimethyl disulfide and toluene, respectively). Toxicity tests showed that both ILs at concentrations of 5% and 10% (v/v) inhibited the glucose uptake of an activated sludge during approximately 24 h. After such lag period, the microorganisms were able to recover its metabolic activity. However, VOC biodegradation experiments showed that ILs at 5% (v/v) were toxic for the activated sludge and a toxic synergistic effect of the IL–VOC combination likely occurred. After acclimation to the target VOCs, only the toluene biodegradation capacity was significantly increased in the presence of ILs. These toxic effects represent a key drawback for the potential of IL-based multiphase systems devoted to VOC biodegradation. Therefore, this study suggests that microbial acclimation only to the VOCs is not enough to get an efficient biodegradation in multiphase systems including ILs as non-aqueous phases.     

Live‐Cell Imaging with Water‐Soluble Aminophenoxazinone Dyes Synthesised through Laccase Biocatalysis

Aminophenoxazinone dyes with variable water solubilities were assayed for the first time in a live‐cell imaging application. Among a library of ten sulfonylated chromophores, one compound gave excellent results as an endocytic marker, showing a precise subcellular distribution. The compound was compared to four commercial vital tracers, including Lucifer Yellow. The first laccase‐mediated regioselective synthesis of a diphosphorylated 2‐aminophenoxazinone dye was also described. This compound, water‐soluble at 10^?2 M , displayed modest fluorescence properties and the ability to complex Mg²⁺ and Ca²⁺ cations, therefore giving fluorescence quenching.     

Easy mass spectrometry for metabolomics and quality control of vegetable and animal fats

Easy ambient sonic spray ionization (EASI), a novel desorption/ionization technique for ambient mass spectrometry analysis, is shown to permit the characterization of different types of vegetable and animal fats. The taxonomic markers of the oils, mainly fatty acids and phenols, are extracted with methanol/water (1:1) solution and made alkaline with NH₄OH, then placed and dried on the surface of a glass tip and directly analyzed by EASI‐MS in the negative‐ion mode. EASI provides a supersonic cloud of charged droplets that causes efficient desorption and ionization of the oil markers directly from the surface of the glass tip. As proof‐of‐principle cases, EASI(?)‐MS was applied to genuine samples of olive oil, hazelnut oil, soybean oil, grape seed oil, canola oil, butter, and lard. Characteristic metabolomics EASI(?)‐MS profiles of fatty acids and eventually phenols were obtained.     

Rayleigh-like instability in the ion-shaping of Au-Ag alloy nanoparticles embedded within a silica matrix

We have studied how spherical 23 ± 3 nm Au(45)Ag(55) nanoparticles embedded within a silica matrix transform into prolate nanorods and nanowires by irradiating them with swift heavy ions. Samples were irradiated at room temperature and normal incidence with 74 MeV Kr and 36 MeV S ions for fluences up to 1.0 × 10(15) cm(-2). We demonstrate the existence of two regimes: (i) below a critical fluence, ～ 2.0 × 10(14) cm(-2), the transformation of the spherical nanoparticle into a nanorod is an individual process, i.e. each nanoparticle transforms into a single nanorod; (ii) for larger fluences the transformation from nanorod to nanowire becomes a collective process, i.e. the break up and dissolution of unstable nanorods contribute to the growth of long nanowires. The passage from the first to the second regime can be interpreted in terms of a Rayleigh-like instability under irradiation. The latter becomes active when the diameter of the nanowire approaches its saturation width under irradiation. Furthermore, we show that the composition of the alloy is only slightly modified during the ion-shaping process. Finally, the energy and the fluence thresholds for deformation and the deformation strain-rate are estimated.     

Analysing metals in bottle‐grade poly(ethylene terephthalate) by X‐ray fluorescence spectrometry

After a rigorous cleaning process, recycled food‐grade poly(ethylene terephthalate) (PET), can be mixed with virgin PET resin in different concentrations and used for packaging of soft drinks. Therefore, it is important to have an experimental method to distinguish the presence of recycled polymer in a batch and to check its “true quality.” One of the issues to be verified is the presence of inorganic contaminants due to the recycling process. X‐ray fluorescence technique is one alternative for this kind of analysis. The results obtained in this work show that bottle‐grade PET samples (PET‐btg) are made either via direct esterification or by a transesterification process. Samples that were subjected to thermo‐mechanical processings (superclean® processing, PET‐btg blends processed in our laboratory and soft drink PET packaging) present Fe Kα emission lines with higher intensities than those presented by virgin bottle‐grade PET. After applying principal component analysis, it can be concluded that Fe is an intrinsic contaminant after the recycling process, furnishing a way to indicate class separations of PET‐btg. A calibration and validation partial least squares model was constructed to predict the weight percent of post‐consumption bottle‐grade PET in commercial PET samples. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010