Confinement-Shear Lattice Model for Concrete Damage in Tension and Compression: II. Computation and Validation

The concrete material model developed in the preceding Part I of this study is formulated numerically. The new model is then verified by comparisons with experimental data for compressive and tensile uniaxial tests, biaxial tests, and triaxial tests, as well as notched tests of mode I fracture and size effect.     

Effects of reinforcing fibers on the crystallization of polypropylene

The effects of the incorporation of different types of fibers on the crystallization kinetics and thermodynamics of isotactic polypropylene (iPP) are investigated. The study is mainly performed by thermal analysis, both in isothermal and constant cooling rate conditions, utilizing differential scanning calorimetry (DSC). The crystallization kinetics of the studied composites is successfully described by the Avrami model. Moreover, the effects of different kind of fibers are studied comparing the values of kinetics parameters such as the Avrami exponent n, the kinetic constant of the crystallization rate, Kn and the half‐time of crystallization, T 1/2. The results of the investigation show that the fibers behave as effective nucleant agents for the crystallization of polypropylene. In fact, a dramatic decrease of the half‐time of crystallization, T1/2, as well as a sensible increase of the overall crystallization rate, Kn, are observed in the presence of all the fibers analyzed. These effects are more marked in the presence of aramid fibers. The Avrami model is successfully applied to describe the crystallization kinetics of the composites. The kinetic curves obtained under non‐isothermal conditions confirm the results obtained under isothermal conditions and demonstrate the nucleating action of the fibers on the PP crystallization. Furthermore, the spherulite growth and the transcrystallinity on the surface of the fibers are investigated by optical polarizing microscopy. It is observed that transcrystallinity takes place in all kind of fibers studied, but also in this case, aramid fibers are the most effective in promoting transcrystallinity.     

Chemical characterisation of Thymus populations belonging from Southern Italy

The genus Thymus L. consists of many species of herbaceous perennials and sub-shrubs. A chemical characterisation of a collection of Thymus spp. originated from regions of Southern Italy was performed using GC and GC/MS. The accessions were collected from various natural habitats of the Basilicata and Puglia Regions and transferred into a new uniform environment. The study showed that amongst the 22 components of the oils the most recurrent ones were geraniol, thymol and α-terpinene followed by linalool, citral and trans-caryophillene. Cluster analysis led to the identification of two chemotypes: geraniol and thymol/α-terpinene; only a biotype remained separate from all others, probably because of its high content linalool (58%).     

Incorporation of nisin in poly (ethylene-co-vinyl acetate) films by melt processing: a study on the antimicrobial properties

Both industry and academia have shown a growing interest in materials with antimicrobial properties suitable for food packaging applications. In this study, we prepared and characterized thin films of ethylene-co-vinyl acetate (EVA) copolymer with antimicrobial properties. The films were prepared with a film blowing process by incorporating a nisin preparation as an antimicrobial agent in the melt. Two grades of EVA containing 14 and 28% (wt/wt) vinyl acetate (EVA 14 and EVA 28, respectively) and two commercial formulations of nisin with different nominal activities were used. The effect of the nisin concentration also was evaluated. The films with the highest antimicrobial activity were those formulated with nisin at the highest activity and EVA with the highest content of vinyl acetate. The use of the commercial formulation of nisin with high activity in the EVA films allowed reduction in the amount of nisin needed to provide antimicrobial properties. Consequently, the mechanical properties of these films were only slightly inferior to those of the pure polymers. In contrast, films prepared by incorporating more of the nisin with lower activity had poor mechanical properties. The effect of different processing temperatures used in the preparation of the films on the antimicrobial properties of the films also was evaluated. The materials displayed antimicrobial properties even when they were prepared at temperatures as high as 160 °C, probably because of the very short processing time (60 to 90 s) required for preparation.     

Toxic metals (Hg, Cd, and Pb) in fishery products imported into Italy: suitability for human consumption

Mercury, cadmium, and lead concentrations were determined in various fishery products (fishes, cephalopod molluscs, and crustaceans) imported into Italy from many European and non-European coastal countries. Considerable differences were found in the concentrations of these metals among the products tested. The highest mean Hg concentration was found in fishes (0.21 μg g(-1) wet weight), whereas cephalopods had the highest mean Cd concentration (0.35 μg g(-1) wet weight). Swordfish (0.80 μg g(-1) wet weight), longtail tuna (0.53 μg g(-1) wet weight), and thornback ray (0.52 μg g(-1) wet weight) had the highest concentrations of Hg, whereas maximum Cd concentrations were found in samples of common cuttlefish (0.85 μg g(-1) wet weight) and common octopus (0.64 μg g(-1) wet weight). The majority of the samples analyzed were in compliance with European Union legislation, except for a few cases. The calculated mean weekly intakes of Hg, Cd, and Pb through consumption of the fishery products tested were all below the legislated respective provisional tolerable weekly intakes. In general, the samples analyzed were considered safe to eat with regard to the metal concentrations found and the allowable intakes based on legislation. Nevertheless, the consumption of some species may be of significant importance for consumer health.     

NMR structure of the (+)-CPI-indole/d(GACTAATTGAC)-d(GTCAATTAGTC) covalent complex

We report the NMR solution structure of (+)-CPI-indole (CPI, 1,2,8,8a-tetrahydrocyclopropa[c]pyrrolo[3,2-e]indol-4(5H)-one), an agent belonging to the CC-1065/duocarmycin family of antitumor compounds. This (+)-CPI-indole structure is covalently bound to d(G(1)ACTAATTGTC(11))-d(G(12)TCAATTAGTC(22)), a synthetic DNA duplex containing a high-affinity binding site. The three-dimensional structure has been determined by several cycles of restrained molecular dynamics calculations with a total of 563 NMR-derived constraints, both in vacuo and by using the generalized Born solvent continuum model. In-depth analysis of the structure of this ligand-DNA complex led to a detailed knowledge of the bound state conformation of the CPI-indole, the most simplified agent related to CC-1065 and duocarmycins, the parent members of a family of extremely potent antitumor compounds. Comparison of the CPI-indole bound conformation with those previously found for (+)-duocarmycin SA (DSA), its unnatural enantiomer (-)-DSA, and the demethoxylated analogue (+)-DSI in their DNA complexes provided additional evidence of the tight correlation between the catalytic effect exerted by DNA on the alkylation reaction and the extent of angular twist between the two planar heteroaromatic subunits of these agents. Additionally, comparison of the structural features of the DNA-bound state of a "naked" ligand, such as CPI-indole, with those of various other duocarmycin agents provided useful information for the interpretation of the observed effects on chemical reactivity of the different substitution patterns at the hemispheres of these types of complex.     

A cyclic CCK8 analogue selective for the cholecystokinin type A receptor: design, synthesis, NMR structure and binding measurements

A cyclic CCK8 analogue, cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 (Dpr=L-2,3-diaminopropionic acid), has been designed on the basis of the NMR structure of the bimolecular complex between the N-terminal fragment of the CCK(A) receptor and its natural ligand CCK8. The conformational features of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 have been determined by NMR spectroscopy in aqueous solution and in water containing DPC-d(38) micelles (DPC=dodecylphosphocholine). The structure of the cyclic peptide in aqueous solution is found to be in a relaxed conformation, with the backbone and Dpr29 side chain atoms making a planar ring and the N-terminal tripeptide extending approximately along the plane of this ring. In DPC/water, the cyclic peptide adopts a "boat-shaped" conformation, which is more compact than that found in aqueous solution. The cyclic constraint between the Dpr29 side chain and the CCK8 carboxyl terminus (Lys34) introduces a restriction in the backbone conformational freedom. However, the interaction of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 with the micelles still plays an important role in the stabilisation of the bioactive conformation. A careful comparison of the NMR structure of the cyclic peptide in a DPC micelle aqueous solution with the structure of the rationally designed model underlines that the turn-like conformation in the Trp30-Met31 region is preserved, such that the Trp30 and Met31 side chains can adopt the proper spatial orientation to interact with the CCK(A) receptor. The binding properties of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 to the N-terminal receptor fragment have been investigated by fluorescence spectroscopy in a micellar environment. Estimates of the apparent dissociation constant, K(d), were in the range of 70-150 nM, with a mean value of 120+/-27 nM. Preliminary nuclear medicine studies on cell lines transfected with the CCK(A) receptor indicate that the sulfated-Tyr derivative of cyclo(29,34)[Dpr(29),Lys(34)]-CCK8 displaces the natural ligand with an IC(50) value of 15 microM.     

Physicochemical aspects of host-guest compounds

The macro properties of crystalline inclusion compounds depend on their structures. Their thermal stabilities are a function of the strength and the directionality of the various nonbonded interactions occurring in the host-guest assembly. Their lattice energies, as measured by the method of atom-atom potentials, correlate with the thermodynamics of the guest-release reactions and the selectivity that a given host displays for a particular guest. The kinetics of solid-host:vapor-guest reactions and of guest exchange are important in our understanding of catalytic processes. Crystal engineering, in which materials of predetermined properties may be synthesized, is still at the empirical stage.