Application of the dry‐spinning method to produce poly(ε‐caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

We designed and manufactured a polymeric system with combined hydrophilic–hydrophobic properties by loading gelatin nanoparticles (GNPs) containing bovine serum albumin (BSA) into poly(ε‐caprolactone) (PCL) fibers. Our ultimate goal was to create a device capable of carrying and releasing protein drugs. Such a system could find several biomedical applications, such as those in controlled release systems, surgical sutures, and bioactive scaffolds for tissue engineering. A two‐step desolvation method was used to produce GNPs, whereas PCL fibers were produced by a dry‐spinning method. The morphological, mechanical, and thermal properties of the produced system were investigated, and the distribution of nanoparticles both inside and on the surface of the fibers was examined. The effect of the particles on the biodegradability of the fibers was also evaluated. In vitro preliminary tests were performed to study the release of BSA from nanoparticle‐laden fibers and to compare this with its release from free nanoparticles. Our results indicate that the distribution of particles inside the fibers was quite homogeneous and only a few of them were present on the surface. The presence of the particles in the fibers did not affect the thermal properties of the PCL polymer matrix, although it created voids that affected the degradation characteristics so the PCL fibers favored faster erosion compared to the plain fibers. Preliminary results indicate that the release from GNP‐laden fibers occurred much more slowly compared to that in the free GNPs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44233.     

Effect of polypropylene morphology on thermal cis-trans isomerization and photofading of some azo dyes: A kinetic study

Five polypropylene films were prepared having different crystallinity and morphology, the latter having been modified by stretching. They were colored with azo dyes XC₆H₄N?NC₆H₄N(C₂H₅)₂ (where X?H, OCH₃, CN, and NO₂). The kinetics of the thermal cis-trans isomerization of these dyes has been studied in the range 21–41°C, much above the glass transition temperature of the polymer. The isomerization process was found to be strictly first-order; the kinetic parameter values have been correlated with the free volume extent in the amorphous regions of the matrix. Lightfastness of the dyes in the polymer matrices has been also investigated: It appeared to be more important for the unoriented samples with respect to the stretched ones and substantially independent on the crystalinity degree.     

Rationally designed inhibitors as tools for comparing the mechanism of squalene-hopene cyclase with oxidosqualene cyclase

The inhibition of squalene-hopene cyclase (SHC) (E.C. 5.4.99.-), an enzyme of bacterial membranes catalyzing the formation of pentacyclic sterol-like triterpenes, was studied by using different classes of compounds originally developed as inhibitors of oxidosqualene cyclase (OCS) (E.C. 5.4.99.7), the enzyme of eukaryotes responsible for the formation of tetracyclic precursors of sterols. The mechanism of cyclization of squalene by SHC, beginning with a protonation of the 2,3 double bond by an acidic residue of the enzyme, followed by a series of electrophilic additions of the carbocationic intermediates to the double bonds, is similar to the mechanism of cyclization of 2,3-oxidosqualene by OSC. The inhibitors studied included: (i) analogs of the carbocationic intermediates formed during cyclization, such as aza-analogs of squalene and 2,3-oxidosqualene; (ii) affinity-labeling inhibitors bearing a methylidene reactive group; and (iii) vinyldioxidosqualenes and vinylsulfide derivatives of the substrates. Comparison of the results obtained with the two enzymes, SHC and OSC, showed that many of the most effective inhibitors of OSC were also able to inhibit SHC, while some derivatives acted as specific inhibitors. Differences could be easily explained on the basis of the different substrate specificity of the two enzymes.     

Advanced testing procedures for high performance coatings

In the first part of this work, an integrated approach incorporating electrochemical (electrochemical impedance spectroscopy), calorimetric (differential scanning calorimetry), mechanical (dynamic mechanical thermal analysis), and infrared spectroscopy (Fourier transform infrared spectroscopy) techniques was used to characterize some organic coatings from the automotive industry. Comparison of the results obtained with different techniques allows not only a higher precision in the evaluation of natural or artificial degradation, which is very difficult to obtain using traditional techniques, but also better data interpretation and, therefore, the possibility of understanding the different degradation mechanisms. In the second part, some preliminary results concerning the comparison of salt spray exposure and EIS measurements are discussed. The statistical analysis of the results showed that the degradation mechanism in the two cases is completely different and, therefore, the information which is obtained with the two testing approaches is also different. With EIS measurements obtained in immersion, it is possible to monitor, in particular, the barrier properties of the coatings, which are dominated by the presence of defects. In the case of salt spray (without scratch), the main property to be measured is the loss of adhesion which causes blister formation. Presented at the 77th Annual Meeting of the Federation of Societies for Coatings Technology, on October 18–22, 1999, in Dallas, TX. Dept. of Materials Engineering, Via Mesiano 77, Trento, Italy. e-mail: Flavio.Deflorian@ing.unitn.it; Stefano.Rossi@ing.unitn.it; Bonora@ing.unitn.it. Dept. ICMMPM, Via Eudossiana, Rome, Italy. e-mail: Lorenzo.Fedrizzi@ing.unitn.it.     

Dilatometry: A Tool to Measure the Influence of Cooling Rate and Pressure on the Phase Behavior of Nucleated Polypropylene

The pressure and cooling rate dependence of the phase diagram of isotactic polypropylene (iPP) with the nucleating agent 1,3:2,4‐bis(3,4‐dimethylbenzylidene)‐sorbitol (DMDBS) is investigated. A custom designed dilatometer is used to measure the specific volume of the blends for a wide range of cooling rates and elevated pressures. The crystallization line in the phase diagram shifts to higher temperatures with increase in the pressure and decrease in the cooling rate, independent of the concentration. The influence of cooling rate and pressure is related to the final morphology determined from X‐ray diffraction. Dilatometry can be used as an interesting alternative to extract information on the phase behavior and crystallinity, for conditions hard or not at all obtainable with standard techniques like DSC or SALS.

     

Peptide-containing aggregates as selective nanocarriers for therapeutics

New nanocarriers are obtained by assembling two amphiphilic monomers: one containing the bioactive peptide CCK8 spaced, by a polydisperse poly(ethylene glycol), from two hydrophobic tails ((C18)2PEG2000CCK8), and the other containing a chelating agent able to give stable radiolabeled indium-111 complexes linked to the same hydrophobic moiety ((C18)2DTPAGlu). The size and shape of the supramolecular aggregates were structurally characterized by dynamic light scattering, small-angle neutron scattering, and cryogenic transmission electronic microscopy. Under the experimental conditions we investigated (pH 7.4 and molar ratio between monomers 30:70), there is the presence of high polydisperse aggregates: rod-like micelles with a radius of approximately 40 A and length >700 A, open bilayer fragments with thickness approximately 65 A, and probably vesicles. The presence of the bioactive peptide well exposed on the external surface of the aggregate allows selective targeting of nanocarriers towards the cholecystokinin receptors overexpressed by the cancerous cells. In vitro binding assays and in vivo biodistribution studies by nuclear medicine experiments using indium-111 are reported. Moreover, preliminary data concerning the drug loading capability of the aggregates and their drug efficiency on the target cells is reported by using the cytotoxic drug doxorubicin. Incubation of receptor-positive and control cells with peptide-containing aggregates filled with doxorubicin shows significantly lower cell survival in receptor-expressing cells relative to the control, for samples incubated in the presence of doxorubicin.     

Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications

Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer blend and two different inorganic nanofillers (an organo-modified clay and a calcium carbonate with a hydrophobic coating) are used for the preparation of the nanocomposites. A detailed investigation of obtained materials is performed through rheological, mechanical, and optical characterizations. Adding nanofillers led to an increase of rigidity and tear strength of blown films without negatively affecting their ductility.     

Insights into the Action Mechanism of the Antimicrobial Peptide Lasioglossin III

Lasioglossin III (LL-III) is a cationic antimicrobial peptide derived from the venom of the eusocial bee Lasioglossum laticeps. LL-III is extremely toxic to both Gram-positive and Gram-negative bacteria, and it exhibits antifungal as well as antitumor activity. Moreover, it shows low hemolytic activity, and it has almost no toxic effects on eukaryotic cells. However, the molecular basis of the LL-III mechanism of action is still unclear. In this study, we characterized by means of calorimetric (DSC) and spectroscopic (CD, fluorescence) techniques its interaction with liposomes composed of a mixture of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-rac-phosphoglycerol (POPG) lipids as a model of the negatively charged membrane of pathogens. For comparison, the interaction of LL-III with the uncharged POPC liposomes was also studied. Our data showed that LL-III preferentially interacted with anionic lipids in the POPC/POPG liposomes and induces the formation of lipid domains. Furthermore, the leakage experiments showed that the peptide could permeabilize the membrane. Interestingly, our DSC results showed that the peptide-membrane interaction occurs in a non-disruptive manner, indicating an intracellular targeting mode of action for this peptide. Consistent with this hypothesis, our gel-retardation assay experiments showed that LL-III could interact with plasmid DNA, suggesting a possible intracellular target.     

Graphene nanoplatelets composite membranes for thermal comfort enhancement in performance textiles

The advent of 2D nanostructured materials as advanced fillers for polymer matrix composites has opened the doors to a plethora of new industrial applications requiring both electric and thermal management. Unique properties, in fact, can arise from accurate selection and processing of 2D fillers and their matrix. Here, we report an innovative family of nanocomposite membranes based on polyurethane (PU) and graphene nanoplatelets (GNPs), designed to improve thermal comfort in functional textiles. GNP particles were thoroughly characterized (through Raman, atomic force microscopy, high-resolution TEM, scanning electron microscope), and showed high crystallinity (I_D/I_G = 0.127), low thickness (D50 < 6–8 layers), and high lateral dimensions (D50 ≈ 3 μm). When GNPs were loaded (up to 10% wt/wt) into the PU matrix, their homogeneous dispersion resulted in an increase of the in-plane thermal conductivity of composite membranes up to 471%. The thermal dissipation of membranes, alone or coupled with cotton fabric, was further evaluated by means of an ad hoc system designed to simulate a human forearm. The results obtained provide a new strategy for the preparation of membranes suitable for technical textiles, with improved thermal comfort.