Multi-objective design optimization of a new space radiator

In this work different multi-objective techniques are used to the conceptual design of a new kind of space radiator. Called VESPAR (Variable Emittance Space Radiator), the radiator has an effective variable emittance which makes it able to reduce or avoid the demand for heater power to warm up equipment during cold case operations in orbit. The multi-objective approach was aimed on obtaining a radiator that minimize its mass while at the same time minimize the need for heater power during cold case. Four multi-objective algorithms were used: Elitist Non-dominated Sorting Genetic Algorithm (NSGA-II), Multi-Objective Genetic Algorithm (MOGA), Multi-Objective Simulating Annealing (MOSA) and Multi-Objective Generalized Extremal Optimization (M-GEO). The first three algorithms were used under the modeFrontier^® optimization software package, while M-GEO is a recently proposed multi-objective implementation of the Generalized Extremal Optimization (GEO) algorithm. The Pareto frontier showing the trade-off solutions between radiator mass and heater power consumption is obtained by the four algorithms and the results compared. An assessment of the performance of M-GEO on this problem, compared to the other well-known multi-objective algorithms is also made.     

The structure and optical dispersion of the refractive index of tellurite glass

The structure and optical properties of a 80TeO₂-(20−x)Li₂O-xTiO₂ glass system where x = 0, 5, 10, and 15 mol% has been investigated using FTIR spectroscopy and Brewster angle measurements. The sample preparation, linear refractive index and density measurements, and infrared spectroscopic analysis are described. The refractive index and density of the studied tellurite glass samples increase when the amount of Ti in the glass is increased. The dispersion of the phase refractive index was analyzed using Wemple’s model. The dispersion energy E_d is significantly affected by the addition of Ti to TeO₂-based glass. The analysis of FTIR spectra indicate a Te coordination change that is in agreement with the increase of the Te coordination number determined from dispersion data using Wemple’s equation.     

Thermo-Metallurgical Modeling of Nodular Cast Iron Cooling Process

A new numerical model to describe the microstructural evolution of a eutectic nodular cast iron during its cooling is presented. In particular, equiaxial solidification assuming an independent nucleation of austenite and graphite nodules is considered. In this context, the austenite has dendritic growth whereas the graphite grows with a spherical shape. After solidification occurs, the model assumes that the graphite nodules present in the cast iron continue growing since the carbon content in austenite decreases. Once the stable eutectoid temperature is reached, the alloy undergoes the austenite-ferrite transformation. The nucleation of the ferrite takes place at the contour of the spherical graphite nodules where austenite has low carbon concentration. A ferrite shell surrounding the graphite nodules is formed afterward by means of a process governed by carbon diffusion. Then, a ferrite-pearlite competitive transformation occurs when the temperature is below the metastable temperature. This thermo-metallurgical model is discretized and solved by means of the finite element method. The model allows the computation of cooling curves, fraction evolution for each component, and size and distribution of graphite nodules. The present numerical results are compared with experiments using standardized Quick-cup-type cups, and satisfactory numerical predictions of the final microstructure and cooling curves are achieved.     

三相四线整流器的中线电流控制

六开关三相四线PWM整流器拓扑是适合于中大功率高频UPS装置的前级整流器拓扑.与常规的六开关三相三线整流器相比,三相四线整流器输出正负直流母线,并且输入侧存在零序电流通路,如果沿用三相三线整流器的控制方法,必然会引起很大的中线电流.针对此问题.讨论了三相四线PWM整流器输出为正负直流母线电压均衡控制和中线电流控制问题,建立了三相四线整流器数学模型,分析了中线电流产生的机理以及抑制的方法,设计了基于同步旋转坐标系的三相四线整流器的控制算法.在功率40kW的实验样机上验证了控制方法的有效性,保证了输出正负母线电压的平衡及较小的输入电流谐波.     

Solar irradiation and PV module temperature dispersion at a large‐scale PV plant

When evaluating the performance of a photovoltaic (PV) system, it is extremely important to correctly measure the plant operating conditions: incident irradiation and cell temperature. At large‐size PV plants, the possible dispersion of the plant operating conditions may affect the representativeness of the values measured at one single point. The available literature contains many observations on irradiance dispersion (typically associated to high temporal resolution experiments) and its effects on the PV power output (unexpected power transients, power fluctuations, etc.). However no studies have been made on the long‐term energy‐related effects of geographic dispersion of solar irradiation, which could affect, for example, to the uncertainty in determining energy performance indexes like PR. This paper analyses the geographical dispersion in the PV operating conditions observed at low temporal resolutions (day, month and year) at two PV plants located, respectively, in the south of Portugal and the north of Spain. It shows that daily irradiation deviations are significantly higher than is commonly supposed. Furthermore, once the measurement points are a certain distance apart (a few hundred metres), the deviations in irradiation appear to be independent of distance. This could help to determine how many irradiance sensors to install in order to reduce uncertainty. Daily mean temperature differences between different points at a large‐scale PV plant range from 1 to 7 K and are not related to the distance between measurement points. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of α‐cellulose/polypyrrole composite for the removal of reactive red dye from aqueous solution: Kinetics and equilibrium modeling

In this work, a composite from α‐cellulose coated with conducting polypyrrole by in situ polymerization using potassium persulfate as oxidant was obtained. The composite was characterized by fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry, UV/Vis spectroscopy, and scanning electron microscopy (SEM) analysis showed homogeneous coating of α‐cellulose with polypyrrole (PPy) to produce a composite with a conductivity of 3.5 × 10⁻⁵ S/m. Batch aqueous adsorption experiments of the reactive red 120 (RR120) dye onto the synthesized material were conducted. The results showed that this composite is an efficient adsorbent for RR120 dye removal. For the adsorption experiments set to an initial pH of 3.9, the adsorption capacity was 15.6 mg of dye/g of composite for an equilibrium concentration (in the liquid) of RR120 dye equal to 1,000 mg/L, whereas a value of 96.1 mg of dye/g of composite was obtained when the solution pH was set to 2.0 for the same equilibrium concentration. When performing adsorption experiments using pure α‐cellulose, dye adsorption was insignificant at any pH value. Adsorption isotherm for RR120 was described by a typical Freundlich model. The transient adsorption of RR120 on the synthesized composite was described by a general three‐resistance model that includes the transport on the film that surrounds the composite particles, diffusion inside the particles, and adsorption on the surface of the particles. A fitting of the uptake curves was performed allowing the estimation of values for the effective diffusivity, D₀, and the adsorption rate coefficient, k₁. For the adsorption experiments with an initial pH value set to 3.9, D₀ was estimated as 1.05 × 10⁻¹⁰ m²/s, whereas k₁ was 1.65 × 10⁻⁴ Lⁿ/g mg^{n − 1} s; the corresponding values of k₁ at pH = 2 and 9.0 were 3.18 × 10⁻⁴ and 5.16 × 10⁻⁵, respectively. POLYM. COMPOS., 36:312–321, 2015. © 2014 Society of Plastics Engineers