Volatile Emissions Triggered by Multiple Herbivore Damage: Beet Armyworm and Whitefly Feeding on Cotton Plants

Plants are commonly attacked by more than one species of herbivore, potentially causing the induction of multiple, and possibly competing, plant defense systems. In the present paper, we determined the interaction between feeding by the phloem feeder silverleaf whitefly (SWF), Bemisia tabaci Gennadius (B-biotype = B. argentifolii Bellows and Perring), and the leaf-chewing beet armyworm (BAW), Spodoptera exigua Hübner, with regard to the induction of volatile compounds from cotton plants. Compared to undamaged control plants, infestation with SWF did not induce volatile emissions or affect the number and density of pigment glands that store volatile and nonvolatile terpenoid compounds, whereas infestation by BAW strongly induced plant volatile emission. When challenged by the two insect herbivores simultaneously, volatile emission was significantly less than for plants infested with only BAW. Our results suggest that tritrophic level interactions between cotton, BAW, and natural enemies of BAW, that are known to be mediated by plant volatile emissions, may be perturbed by simultaneous infestation by SWF. Possible mechanisms by which the presence of whiteflies may attenuate volatile emissions from caterpillar-damaged cotton plants are discussed.     

Eicosapentaenoic acid (20∶5n-3) from the marine microalgaPhaeodactylum tricornutum

Eicosapentaenoic acid (EPA, 20∶5n-3) was obtained from the marine microalgaePhaeodactylum tricornutum by a three-step process: fatty acid extraction by direct saponification of biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds, and EPA isolation by semipreparative high-performance liquid chromatography (HPLC). Alternatively, EPA was obtained by a similar two-step process without the PUFA concentration step by the urea method. Direct saponification of biomass was carried out with two solvents that contained KOH for lipid saponification. An increase in yield was obtained because the problems associated with emulsion formation were avoided by separating the biomass from the soap solution before adding hexane for extraction of insaponifiables. The most efficient solvent, ethanol (96%) at 60°C for 1 h, extracted 98.3% of EPA. PUFA were concentrated by the urea method with a urea/fatty acid ratio of 4∶1 at a crystallization temperature of 28°C and by using methanol and ethanol as urea solvents. An EPA concentration ratio of 1.73 (55.2∶31.9) and a recover yield of 78.6% were obtained with methanol as the urea solvent. This PUFA concentrate was used to obtain 93.4% pure EPA by semipreparative HPLC with a reverse-phase, C₁₈, 10 mm i.d.×25-cm column and methanol/water (1% acetic acid), 80∶20 w/w, as the mobile phase. Eighty-five percent of EPA loaded was recovered, and 65.7% of EPA present inP. tricornutum biomass was recovered in highly pure form by this three-step downstream process. Alternatively, 93.6% pure EPA was isolated from the fatty acid extract (without the PUFA concentration step) with 100% EPA recovery yield. This two-step process increases the overall EPA yield to 98.3%, but it is only possible to obtain 20% as much EPA as that obtained by three-step downstream processing.     

Antimony Solubility and Speciation in Aqueous Sulphuric Acid Solutions at 298 K

This work is an experimental and theoretical study of antimony speciation and the solubility of Sb₂O₅, Sb₂O₃ and Sb₂(SO₄)₃ at 298 K in aqueous sulphuric acid solutions (0 to 6 kmol/m³). A thermodynamic model was developed to quantify the solubility products and aqueous metal speciation. Main dissolved species were H₃SbO_3(aq) and H₃SbO_4(aq). The solubility of antimony increases with increasing solution acidity and with the presence of hydrogen peroxide in the solution. The following standard equilibrium constants at 298 K were obtained: Log K⁰_(Sb2O5) = 11.7±0.5, Log K⁰_(Sb2O3) = 32±1, and Log K⁰_(Sb2(SO4)3) = 55±2.     

Al ionic radius influence on molecular dynamics simulations ofγ-Al2O3

Molecular dynamics (MD) simulations of-Al₂O₃, using a pairwise additive interaction potential of Pauling's type with four different radii for aluminum atoms, were analysed in order to determine the influence of the radius on the modification of coordination numbers of A1 relative to the ideal structure, at two different temperatures of 300 and 1500 K. It is found that the best choice is the radius of penta-coordinated aluminum, reproducing structural and vibrational properties of the compound in excellent agreement with experimentally observed properties.     

Digestibility and nutritional value of crude oil from three amaranth species

Oils from a selection ofAmaranthus caudatus, A. hypochondriacus andA. cruentus were extracted with hexane. The crude oils were analyzed for acid value, saponification and iodine number, and were included in basal casein diets for rat studies at 5 and 10% levels to replace equal amounts of refined cottonseed oil. The oils fromA. cruentus andA. hypochondriacus were similar in the oil properties studied and different fromA. caudatus. At either 5 or 10% food intake levels, weight gain and PER were not statistically different from values reported for cottonseed oil. True digestibility of amaranth oil was lower than that of cottonseed oil.A. cruentus oil gave the lowest digestibility. Oil levels induced statistical differences in food intake and digestibility. Oils fromA. caudatus, A. hypochondriacus and cottonseed induced similar serum cholesterol levels, while oil fromA. cruentus gave statistically higher values. Hemoglobin, hematocrit and serum proteins were similar among all groups. Microscopic analysis of the organs of the rats revealed some changes that were also found in cottonseed oil-fed rats. It was concluded that crude amaranth oil has lower digestibility than cottonseed oil, but that it is not responsible for growth-depressing effects when the seed is fed raw as compared to processed materials.     

The role of temperature in copper electrocrystallization in ammonia-chloride solutions

This paper presents the analysis of temperature effect on the copper electrocrystallization process from the stainless steel/Cu(II)-Cu(I)-NH₄Cl-NH₃-H₂O system. Electrochemical techniques and scanning electron microscopy with energy dispersion spectroscopy were employed. An increment in temperature had a favorable effect in increasing the kinetic and nucleation parameters, favoring the copper reduction on the stainless steel substrate. From the chronoamperometric study, it was possible to find the transfer coefficient (α), which does not have a significant variation with temperature, and the exchange current density (i₀) for different temperatures, where a 50.63 kJ/mol value was estimated for the activation energy. The potentiostatic study suggested the presence of two processes involved: an electron transfer reaction and a 3D nucleation—growth process, under combined charge transfer and diffusion limitations. In addition, an important current contribution could be accounted for on the basis of the existence of a capacitive component in the system. This capacitive behavior was associated to the oxide layer (Cr₂O₃)-chloride interactions on the stainless steel surface. Current transients analyses at different potentials, based on the models of: Milchev (low overpotential), Scharifker-Mostany (SM) and Heermann-Tarallo (HT) (high overpotential) allowed to obtain the values of nucleation parameters, such as: the nucleation rate constant (A), the active nucleation sites number (N₀), the stationary nucleation rate (I_st = A × N₀) and the nuclei saturation number (N_s). Finally, the deposits obtained were analyzed by SEM, showing an acceptable correlation between the nucleation parameters and morphology of the deposits obtained. An increment in temperature favored the growth of the cluster before the coalescence occurred.     

Encapsulation of Hydroxyapatite Microspheres with Fluorapatite Using a Diffusion Process

Modification of hydroxyapatite surfaces can improve the properties of biomedical devices. The objective of this work was to encapsulate hydroxyapatite particles with a fluorapatite layer. A suspension of hydroxyapatite microspheres was prepared in a solution at different pH and treated with ammonium fluoride. pH, calcium, and fluoride were monitored in real time and particles subjected to fluoride analysis. After addition of fluoride, it was found that more material is released from the particle surface at low pH conditions, but leads to a high fluoride uptake from solution. Low solution fluoride levels produce a fluorapatite layer, but higher fluoride levels produce calcium fluoride.     

Composition of phospholipids of white muscle of six tuna species

A comparative study of the phospholipids of white muscle of six of the comercially utilized tuna species, including quantitative analyses of phospholipid classes and studies of the acyl composition of the major components. Plasmalogen compounds also were identified and quantified. Choline and ethanolamine glycerophospholipids were the most abundant classes in all the samples, as well as the only molecules containing plasmalogens (16∶0, 18∶0, and 18∶1 alkenyl ether chains). The patterns of fatty acid distribution within each of the phospholipid classes showed general similarities in the species analyzed. However, ratios between certain saturated and polyunsaturated fatty acids in different phospholipid classes showed remarkable diffences. The high content of n−3 polyunsaturated fatty acids in the principal phospholipids, such as the plasmalogens, and taking into account the fatty acids possible importance in human nutrition, indicates that the white muscle of tuna species may be a potentially important dietary item.     

Aldol condensation of campholenic aldehyde and MEK over activated hydrotalcites

In this paper, activated Mg-Al hydrotalcites were used as catalysts in the aldol condensation of campholenic aldehyde and methyl ethyl ketone (MEK). These materials represent an attractive alternative to less environmentally friendly liquid bases in a number of base-catalyzed reactions involved in the pharmaceutical and fragrance industries. The presence of basic hydroxyl groups in the interlayer space leads to very active materials. However, the relation between the activity of reconstructed hydrotalcites and the rehydration procedure is still not well understood. Different rehydration protocols in combination with extensive characterization studies were performed, including XRD, SEM, IR spectroscopy and TPD of CH₃CN and CH₃NO₂. The materials were tested as catalysts in the aldol condensation of campholenic aldehyde and MEK, and relationships between the catalytic performance of the activated hydrotalcites and the rehydration procedure were derived. Several factors may influence the activity and selectivity of this reaction, such as the reaction temperature, the molar ratio of the reactants and the degree of rehydration of the hydrotalcite-like catalysts. The selectivity towards the formation of the desired branched isomer increases when performing the reaction at low temperatures.     

Online FPS games: effect of router buffer and multiplexing techniques on subjective quality estimators

First Person Shooters are a genre of online games in which users demand a high interactivity, because the actions and the movements are very fast. They usually generate high rates of small packets which have to be delivered to the server within a deadline. When the traffic of a number of players shares the same link, these flows can be aggregated in order to save bandwidth. Certain multiplexing techniques are able to merge a number of packets, in a similar way to voice trunking, creating a bundle which is transmitted using a tunnel. In addition, the headers of the original packets can be compressed by means of standard algorithms. The characteristics of the buffers of the routers which deliver these bundled packets may have a strong influence on the network impairments (mainly delay, jitter and packet loss) which determine the quality of the game. A subjective quality estimator has been used in order to study the mutual influence of the buffer and multiplexing techniques. Taking into account that there exist buffers which size is measured in terms of bytes, and others measured in packets, both kinds of buffers have been tested, using different sizes. Traces from real game parties have been merged in order to obtain the traffic of 20 simultaneous players sharing the same Internet access. The delay and jitter produced by the buffer of the access router have been obtained using simulations. In general, the quality is expected to be reduced as the background traffic grows, but the results show an anomalous region in which the quality rises with the background traffic amount. Small buffers present better subjective quality results than bigger ones. When the total traffic amount gets above the available bandwidth, the buffers measured in bytes add to the packets a fixed delay, which grows with buffer size. They present a jitter peak when the offered traffic is roughly the link capacity. On the other hand, buffers which size is measured in packets add a smaller delay, but they increase packet loss for gaming traffic. The obtained results illustrate the need of knowing the characteristics of the buffer in order to make the correct decision about traffic multiplexing. As a conclusion, it would be interesting for game developers to identify the behaviour of the router buffer so as to adapt the traffic to it.