Touch‐Interactive Flexible Sustainable Energy Harvester and Self‐Powered Smart Card

Sustainable and safe energy sources combined with cost effectiveness are major goals for society when considering the current scenario of mass production of portable and Internet of Things (IoT) devices along with the huge amount of inevitable e‐waste. The conceptual design of a self‐powered “eco‐energy” smart card based on paper promotes green and clean energy, which will bring the zero e‐waste challenge one step closer to fruition. A commercial raw filter paper is modified through a fast in situ functionalization method, resulting in a conductive cellulose fiber/polyaniline composite, which is then applied as an energy harvester based on a mechano‐responsive charge transfer mechanism through a metal/conducting polymer interface. Different electrodes are studied to optimize charge transfer based on contact energy level differences. The highest power density and current density obtained from such a paper‐based “eco‐energy” smart card device are 1.75 W m^?2 and 33.5 mA m^?2 respectively. This self‐powered smart energy card is also able to light up several commercial light‐emitting diodes, power on electronic devices, and charge capacitors.     

RPSF: a new QoS bandwidth request mechanism for the IEEE?802.16

The IEEE 802.16 standard is a Broadband Wireless Access (BWA) technology which offers Quality of Service (QoS) support to different types of applications. This standard defines the physical (PHY) and medium access control (MAC) layers. Its MAC layer defines different types of QoS mechanisms to support various types of applications, being the multicast polling one of these mechanisms. Under this mechanism, based on a contention process, every connection competes to gain access to the channel in order to place its bandwidth requests. In this paper, we propose a new signalling mechanism, called Requests Per Service Flow (RPSF), to reduce the contention phase in the frame. Additionally, we undertake a comparison of this new method with respect to other mechanisms. The simulation results show that our new proposal outperforms other mechanisms recently reported in the literature, in terms of throughput and end-to-end delay.     

Interoperability in semantic Web of Things: Design issues and solutions

The significant improvement in processing power, communication, energy consumption, and the size of computational devices has led to the emergence of the Internet of Things (IoT). IoT projects raise many challenges, such as the interoperability between IoT applications because of the high number of sensors, actuators, services, protocols, and data associated with these systems. Semantics solves this problem by using annotations that define the role of each IoT element and reduces the ambiguity of information exchanged between the devices. This work presents SWoTPAD, a semantic framework that helps in the development of IoT projects. The framework is designer oriented and provides a semantic language that is more user‐friendly than OWL‐S and WSML and allows the IoT designer to specify devices, services, environment, and requests. Following this, it makes use of these specifications and maps them for RESTful services. Additionally, it generates an automatic service composition engine that is able to combine services needed to handle complex user requests. We validated this approach with two case studies. The former concerns a residential security system and the latter, the cloud application deployment. The average time required for service discovery and automatic service composition corresponds to 72.9% of the service execution time in the case study 1 and 64.4% in the case study 2.     

STC power for 15 MW of PV comparing nameplate,initial power and power after 4 years

To date, the majority of quality controls performed at PV plants are based on the measurement of a small sample of individual modules. Consequently, there is very little representative data on the real Standard Test Conditions (STC) power output values for PV generators. This paper presents the power output values for more than 1300 PV generators having a total installed power capacity of almost 15.3 MW. The values were obtained by the INGEPER‐UPNA group, in collaboration with the IES‐UPM, through a study to monitor the power output of a number of PV plants from 2006 to 2009. This work has made it possible to determine, amongst other things, the power dispersion that can be expected amongst generators made by different manufacturers, amongst generators made by the same manufacturer but comprising modules of different nameplate ratings and also amongst generators formed by modules with the same characteristics. The work also analyses the STC power output evolution over time in the course of this 4‐year study. The values presented here could be considered to be representative of generators with fault‐free modules. Copyright © 2012 John Wiley & Sons, Ltd.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

The effect of field drying on the non-structural carbohydrate composition in vetch hay

Common vetch (Vicia sativa L) was harvested and allowed to dry in the open air. The composition of fresh forage in non-structural carbohydrates varied markedly between years, the contents of sugars and starch in both leaves and stems being much higher in 1990-91 than 1991-92. Field drying produced a significant decrease in the amounts of these carbohydrates. The total losses of sugars and starch in hay, expressed as losses of dry matter, ranged from 28 to 15 g kg^-1, depending on the year.     

A CMOS threshold voltage reference source for very-low-voltage applications

This paper describes a CMOS voltage reference that makes use of weak inversion CMOS transistors and linear resistors, without the need for bipolar transistors. Its operation is analogous to the bandgap reference voltage, but the reference voltage is based on the threshold voltage of an nMOS transistor. The circuit implemented using 0.35 μm n-well CMOS TSMC process generates a reference of 741 mV under just 390 nW for a power supply of only 950 mV. The circuit presented a variation of 39 ppm/°C (after individual resistor trimming) for the −20 to +80 °C temperature range, and produced a line regulation of 25 mV/V for a power supply of up to 3 V.     

Two‐layer LMDS system architecture: DAVIC‐based approach and analysis

Despite the growing interest for LMDS systems there have been only a few commercial implementations until now especially outside of the U.S.A. The use of hierarchical structure through two‐layer networking has been even rarer. In many cases LMDS systems have strong advantages against their competitors to cover the last mile. In this article, we review and analyze the standards currently available and describe the European two‐layer trial system developed in 1996–2000. We show why further development towards IP based LMDS is useful in the future. Most of our recommendations are based on results derived from the European Union supported research project CABSINET. It had the aim of demonstrating the viability of a 40 GHz cellular digital television system with a return channel to offer interactive services. Two systems were tested: a line of sight link using QPSK, and a non‐line of sight with COFDM modulation scheme. In the RF‐subsystems, the greatest difficulty of any viable LMDS system is to obtain a moderately low price for the user receiver, while fulfilling the hard OFDM requirements in terms of phase noise, stability and spectrum restrictions. Several options have been studied in order to design the subsystems with the smallest cost. This paper will present the architectures of the transmitters, nomadic terminals, and the design of the IF/RF subsystems for both types of modulations. The discussion is focused on system engineering and selections required in order to build a full two‐layer LMDS system. Copyright © 2002 John Wiley & Sons, Ltd.