Synthesis and release of ATP by soluble mitochondrial F1 in complex with its inhibitor protein during dimethylsulfoxide-water transitions

Soluble mitochondrial F1 and F1 in complex with the natural ATPase inhibitor protein (F1-IP) catalyze the spontaneous synthesis of [gamma-32P]ATP from medium [32P]phosphate and enzyme-bound ADP when incubated in media with dimethylsulfoxide (Me2SO); under these conditions, the synthesized [gamma-32P]ATP is not released into the media, it remains tightly bound to the enzymes [Gómez-Puyou, A., Tuena de Gómez-Puyou, M. & de Meis, L. (1986) Eur. J. Biochem. 159, 133-140]. Some of the characteristics of the synthesized [gamma-32P]ATP were studied in F1 and F1-IP (ATPase activities of 70 and 1-3 micromol x min(-1) x mg(-1), respectively). In Me2SO media, gamma-phosphate of synthesized ATP in F1 or F1-IP exchanges with medium phosphate. From the rates of the exchange reaction, the half-times for hydrolysis of the synthesized ATP in F1 and F1-IP were calculated: 45 min and 58 min for F1 and F1-IP, respectively. The course that synthesized [gamma-32P]ATP follows after dilution of the Me2SO synthetic mixture with aqueous buffer was determined. After dilution, the half-life of synthesized ATP in F1 was less than 1 min. In F1-IP, ATP was also hydrolyzed, but at significantly lower rates. In F1-IP, dilution also produced release of the synthesized [gamma-32P]ATP. This was assayed by the accessibility of [gamma-32P]ATP to hexokinase. About 25% of [gamma-32P]ATP synthesized in F1-IP, but not in F1, was released into the media after dilution with aqueous buffer that contained 20 mM phosphate. Release of tightly bound ATP required the binding energy of phosphate and solvation of F1-IP, however, the particular kinetics of F1-IP were also central for medium ATP synthesis in the absence of electrochemical H+ gradients.     

Computationally efficient methods for bit-error rate evaluation inweakly coherent optical systems

A semianalytical method to estimate the bit-error rate performance of nonsynchronous ASK and FSK optical heterodyne systems is presented. This approach takes into account numerous system details with an accuracy similar to Monte-Carlo simulation, but with a computation time reduced by several orders of magnitude. An analytical approximation, based on a closed-form expression for the decision variable moment generating function, is also presented. The results obtained with the semianalytical method and the analytical approximation are compared to Monte-Carlo simulation results and to measurements obtained on a practical FSK system     

Fabrication of sharp silicon tips employing anisotropic wet etching and reactive ion etching

We developed a process to obtain sharper silicon tips by employing anisotropic etching in a KOH solution followed by SF₆ plasma etch. The tips were further sharpened using the established thermal oxidation technique to decrease the cone angle and, therefore, obtain smaller curvature radii. We have analyzed the impact of such changes in geometry on a figure of merit associated with the field emission characteristics. An increase in the figure of merit by a factor of three was found in relation to the tips before sharpening.     

A Study of Ozone Generation by Negative Corona Discharge Through Different Plasma Chemistry Models

The Steady radial distribution of chemical species in a wire‐to‐cylinder ozone generator filled with pure oxygen has been computed by applying four different plasma chemistry models of increasing complexity. The most complete model considers ten species (e, O₂ ⁺, O₂ ^?, O₃ ^?, O^?, O₂, O₂(¹Δ_g), O₂(¹∑_g ⁺), O and O₃) and 79 reactions, including ionization by electron impact, electron attachment and detachment, electron-ion recombination, charge transfer, etc. The chemical model is coupled with the electrical model through Poisson's equation. The spatially averaged ozone density has been computed as a function of the current intensity and compared with the experimental values obtained by UV spectroscopy.     

Uniform Polarization Scattering With Fiber-Coil-Based Polarization Controllers

A detailed study of fiber-coil-based polarization controllers (PCs) is performed. First, a method to deterministically calculate the PC configuration in order to transform between any two states of polarization is presented. In a second stage, the case in which the configuration angles are randomly changed is studied. The cases of a single PC and of the system obtained with the concatenation of several PCs are analyzed. For both cases, a general expression for the variance of the Stokes parameters is obtained. Using this expression, it is demonstrated that it is possible to achieve uniform polarization scattering using a concatenation of fiber-coil-based PCs. Finally, it is shown that fiber-coil-based PCs can be used to emulate both first- and second-order polarization-mode dispersions     

A comparative study of the durability and behaviour of fat lime and feebly-hydraulic lime mortars

Lime mortars are often used for repairs to historic buildings. This paper investigates two forms of lime binder: fat and feebly-hydraulic, in order to predict their long-term behaviours and hence ascertain which of the two possesses greater durability, so that they may be used more efficiently in restoration. Mortars were tested for properties governing moisture movement and also subject to durability cycles. The resistance to damage under freezing conditions was evaluated with the saturation coefficient. Thermal cycles had no effect on the mortars and gave no indication of the relative durabilities of the binders. Salt crystallization cycles, though effective in distinguishing the more durable of the two, were too aggressive to gauge a clear profile of salt weathering and succeeded in rapidly decomposing the samples. Tests on the properties governing moisture movement produced good indications of the degree to which the mortars permit flow through their fabrics. According to the results obtained, fat lime mortars are more durable than those made with feebly-hydraulic lime. The results also suggest that the feebly-hydraulic lime mortars are at a higher risk of decomposition by granular disintegration whereas fat lime mortars are better suited to damp, slightly exposed conditions. These results disagree with the general opinion that hydraulic limes are more durable than fat limes due to the additional strength and water insolubility arising from their hydraulicity.     

Nitrogen management in reservoir catchments through constructed wetland systems.

In this study, nitrogen removal was investigated in pilot-scale subsurface flow (SSF) and in free water surface flow (FWS) constructed wetlands installed in the campus of TUBITAK-Marmara Research Center, Gebze, near Istanbul, Turkey. The main purposes of this study are to apply constructed wetlands for the protection of water reservoirs and to reuse wastewater. Experiments were carried out at continuous flow reactors. The effects of the type of plants on the removal were investigated by using emergent (Canna, Cyperus, Typhia spp., Phragmites spp., Juncus, Poaceae, Paspalum and Iris.), submerged (Elodea, Egeria) and floating (Pistia, Salvina and Lemna) marsh plants at different conditions. During the study period HLRs were 30, 50, 70, 80 and 120 L m(2)d(-1) respectively. The average annual NH4-N, NO(3)-N, organic N and TN treatment efficiencies in SSF and FWS wetlands are 81% and 68%, 37% and 49%, 75% and 68%, 47% and 53%, respectively. Nitrification, denitrification and ammonification rate constant (k20) values in SSF and FNS systems have been found as 0.898 d(-1) and 0.541 d(-1), 0.488 d(-1) and 0.502 d(-1), 0.986 d(-1) and 0.908 respectively. Two types of the models (first-order plug flow and multiple regression) were tried to estimate the system performances.     

Total and acid-soluble fluoride content of infant cereals, beverages and biscuits from Brazil

Total fluoride (TF) and HCl 0.01 M ('gastric juice')-soluble fluoride (SF) were analysed in infant foods, beverages and calcium-rich biscuits. Samples were divided into seven categories: children cereals (A), chocolate-flavoured milk (B), soy beverages (C), filled biscuits (D), non-filled biscuits (E), wafer biscuits (F) and corn starch biscuits (G). Mean TF concentrations ± SD (amplitude, unit µg F ml^-1 or µg F g^-1) were: (A) 4.25 ± 3.04 (0.20 - 7.84, n = 6); (B) 0.34 ± 0.47 (0.05-1.27, n = 6); (C) 0.15 ± 0.07 (0.09-0.29, n = 8); (D) 8.44 ± 1.76 (7.65-10.47, n = 4); (E) 12.41 ± 1.15 (10.69-13.68, n = 4); (F) 0.35 ± 0 (0.34-0.36, n = 4) and (G) 7.77 ± 1.12 (6.86-8.68, n = 2). Five samples of cereals, one sample of chocolate-flavoured milk and 10 samples of biscuits were analysed for SF. In cereals analysed for SF, all fluoride was soluble, while for the chocolate-flavoured milk, approximately 50% of TF was soluble. Regarding the biscuits analysed for SF approximately 20% of TF was soluble. It was observed that some of the cereals and beverages, and most of the biscuits analysed, might be important contributors to total daily fluoride intake. When consumed just once per day, cereals and beverages might supply up to 25% of the maximum recommended daily fluoride intake (0.07 mg F kg^-1 body weight) for a 2-year-old child (12 kg). For the filled, non-filled and corn starch biscuits, when 3, 32 or 20 units of them, respectively, are consumed just once per day, they may supply up to 16% of the maximum recommended daily fluoride intake. However, only approximately 25% of fluoride absorption occurs from the stomach and 75% from the small intestine. Therefore, a higher fluoride bioavailability is possible.