Programmable CMOS CNN Cell Based on Floating-gate Inverter Unit

At present, the Cellular Neural Network (CNN) is a potential parallel structure able to perform image processing tasks in real-time when is effectively implemented in CMOS technology. The CNN silicon integration success is due mainly to the local connectivity of processing cells. In this work, an alternative design based on floating-gate MOS inverters is presented, which uses unipolar signals for solving binary tasks. The approach brings a fast response in a reduced silicon area, as shown through electrical simulations. A prototype cell in CMOS technology (AMI, 1.2 micron) was fabricated and tested for eight image processing tasks.

Pulsed Vacuum Osmotic Dehydration of Beetroot,Carrot and Eggplant Slices: Effect of Vacuum Pressure on the Quality Parameters

Pulsed vacuum osmotic dehydration (PVOD) is a widely used technique for reducing moisture content and water activity in biological products. This study aimed to analyze the effect of vacuum application (VA) on PVOD of beetroot, carrot, and eggplant slices, with respect to chemical (moisture, water activity, specific pigments, polyphenols, and sodium content), optical (color), mechanical (shrinkage, maximum stress, and elasticity), and structural (microstructure) properties. PVOD was conducted at three different vacuum pressures (0, 40, and 80 kPa, for 10 min), during a total process time of 300 min. Osmotic processing was performed at 35 °C by using a ternary osmotic solution [40% sucrose +?10% sodium chloride (w/w)]. Eggplant and carrot samples were more sensitive to VA, compared to beetroot. This was related to their porous and less compact structure. In general, VA reduced the moisture content and water activity and preserved the carotenoid content. VA caused loss of betalain and phenolic acid, favored sodium uptake, and induced significant changes in the optical, mechanical, and structural properties, compared to the osmotic processing conducted at atmospheric pressure.     

The role of angiotensin AT1 receptors in the diuretic, natriuretic, kaliuretic and blood pressure responses induced by angiotensin II activation of the median preoptic nucleus in conscious rats

We determined the effects of two classical angiotensin II (ANG II) antagonists, [Sar1, Ala8]-ANG II and [Sar1, Thr8]-ANG II, and losartan (a nonpeptide and selective antagonist for the AT1 angiotensin receptors) on diuresis, natriuresis, kaliuresis and arterial blood pressure induced by ANG II administration into the median preoptic nucleus (MnPO) of male Holtzman rats weighing 250-300 g. Urine was collected in rats submitted to a water load (5% body weight) 1 h later. The volume of the drug solutions injected was 0.5 microliters over 10-15 s. Pre-treatment with [Sar1, Ala8]-ANG II (12 rats) and [Sar1, Thr8]-ANG II (9 rats), at the dose of 60 ng reduced (13.7 +/- 1.0 vs 11.0 +/0 1.0 and 10.7 +/0 1.2, respectively), whereas losartan (14 rats) at the dose of 160 ng totally blocked (13.7 +/- 1.0 vs 7.6 +/- 1.5) the urine excretion induced by injection o 12 ng of ANG II (14 rats). [Sar1, Ala8]-ANG II impaired Na+ excretion (193 +/- 16 vs 120 +/- 19), whereas [Sar1, Thr8]-ANG II and losartan block Na+ excretion (193 +/- 16 vs 77 +/- 15 and 100 +/- 12, respectively) induced by ANG II. Similar effects induced by ANG II on K+ excretion were observed with [Sar1, Ala8]-ANG II, [Sar1, Thr8]- ANG II, and losartan pretreatment (133 +/- 18 vs 108 +/- 11, 80 +/- 12, and 82 +/- 15, respectively). The same doses as above of [Sar1, Ala8]-ANG II (8 rats), [Sar1, Thr8]-ANG II (8 rats), and losartan (9 rats) blocked the increase in the arterial blood pressure induced by 12 ng of ANG II (12 rats) (32 +/- 4 vs 4 +/- 2, 3.5 +/- 1, and 2 +/- 1, respectively. The results indicate that the AT1 receptor subtype participates in the increases of diuresis, natriuresis, kaliuresis and arterial blood pressure induced by the administration of ANG II into the MnPO.     

Composite with Recyclable Loads for the Manufacture of Blocks to Build Popular Houses

The science space in a state school in Natal city was built using a composite consisting of gypsum, EPS （expanded polystyrene）, shredded tire, cement and water. Mechanical and thermal resistances were evaluated. Inside the blocks, three types of fillings （EPS plates, aluminum cans and 500 mL bottles of mineral water） were placed in order to obtain a walls with higher thermal resistance, but also to give it an ecologically correct order, considering that both the tire and the EPS occupy a large space in landfills and require years to be degraded when released into the environment. Compression tests were conducted according to the rules. The experiments demonstrated that the temperature difference between the internal and external surfaces on the walls reached levels above 12.0 ℃. It was also demonstrated that the proposed composite has adequate mechanical strength to be used for sealing walls. The proposed use of the composite can contribute to reduce the significant housing deficit of Brazil, producing popular houses at low cost and with little time to work.     

The Trend Toward Latin American Economic Integration

Revolutionary developments in the patterns of world trade have taken place during the past five years, and Latin America is no exception. This article discusses the effects of the Latin American Free Trade Association, the Central American Common Market, and the Inter-American Development Bank on the economic integration of Latin America.     

Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation

This study evaluated the effect of air-abrasion parameters such as particle size, distance, and time on adhesion of resin cement to zirconium dioxide (Y-TZP) and t→m phase transformation. Y-TZP blocks (N = 80) (In-Ceram YZ, Vita) (4 mm^3?×?4 mm^3?×?3 mm³) were assigned into eight groups (n = 10): air-abrasion with 30 μm (CoJet Sand, S30) and 110 μm (Rocatec-Plus, S110) silica-coated alumina particles, applied for either for 10–20 s (T = time), from a distance of 10–20 mm (D = distance), composing the following groups: S₃₀T₁₀D₁₀, S₃₀T₁₀D₂₀, S₃₀T₂₀D₁₀, S₃₀T₂₀D₂₀, S₁₁₀T₁₀D₁₀, S₁₁₀T₁₀D₂₀, S₁₁₀T₂₀D₁₀, and S₁₁₀T₂₀D₂₀. Resin composite (RelyX ARC) was bonded to Y-TZP blocks in polyethylene molds. The specimens were aged (10,000 thermal cycles and water storage for 90 days) prior to shear bond test. Failure types were analyzed under stereomicroscope and SEM, and phase transformation was calculated. Data (MPa) were analyzed using 3-way ANOVA and Tukey’s tests. Air-abrasion with 110 μm silica particles (10.96) presented significantly higher bond strength (p = 0.0149) compared to 30 μm (8.96). Time (p = 0.403) and distance (p = 0.179) parameters did not affect the results significantly. Air-abrasion with 110 μm particles (12.3) promoted higher bond strength than that of 30 μm (6.4) when applied for 10 s from a distance of 10 mm (Tukey’s). Failure types were predominantly adhesive. Phase transformation ranged between 30.3 and 35.9% for 30 μm particles and 23.8–43.7% for 110 μm particles. While the size of silica-coated alumina particles were more relevant parameter for resin cement adhesion to Y-TZP, time (up to 20 s) and distance (up to 20 mm) appear to be less pertinent.