Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part II: process and product characterization

The aqueous-core enclosed in lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water mimic, at least in theory, the environment within viable cells, thus being suitable for housing hydrophilic protein entities such as bioactive proteins, peptides and bacteriophage particles. This study reports a complete physicochemical characterization of optimized biomimetic aqueous-core lipid nanoballoons housing hydrophilic (BSA) protein entities, evolved from a statistical 2³×3¹ factorial design study (three variables at two levels and one variable at three levels) that was the subject of the first paper of a series of three, aiming at complete stabilization of the three-dimensional structure of protein entities attempted via housing the said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion. The statistical factorial design followed led to the production of an optimum W/O/W multiple emulsion possessing quite homogeneous particles with an average hydrodynamic size of (186.2?±?2.6) nm and average Zeta potential of (?36.5?±?0.9) mV, and exhibiting a polydispersity index of 0.206?±?0.014. Additionally, the results obtained for the diffusion coefficient of the lipid nanoballoons integrating the optimized W/O/W multiple emulsion were comparable and of the same order of magnitude (10^?12 m² s^?1) as those published by other authors since, typically, diffusion coefficients for molecules range from 10^?10 to 10^?7 m² s^?1, but diffusion coefficients for nanoparticles are typically of the order of magnitude of 10^?12 m² s^?1.     

The "Heart Area" of Juan Canalejo Hospital Complex. A new approach to clinical management

The present work describes the process by which the pilot project of clinical management of the Hospital Complex Juan Canalejo, designated as "Heart Area", was implemented. In the first section, the needs and reasons that led to the undertaking of this project are explained. The project's objectives and operative strategies are listed. In the Material and Methods section, three basic aspects of the "Heart Area" are described: selection criteria of the "Area", its structure and function, and its foundation and development. In the Results section, we compare the activity undertaken in the "Area" to the situation present prior to its implementation, in relation to quality and costs. Finally, in the Conclusions, we comment on the important implications that our project can have within the Hospital Complex Juan Canalejo as well as in the health care field in general.     

Post-processing and visualization techniques in 2D boundary element analysis

Most post-processors for boundary element (BE) analysis use an auxiliary domain mesh to display domain results, working against the profitable modelling process of a pure boundary discretization. This paper introduces a novel visualization technique which preserves the basic properties of the boundary element methods. The proposed algorithm does not require any domain discretization and is based on the direct and automatic identification of isolines. Another critical aspect of the visualization of domain results in BE analysis is the effort required to evaluate results in interior points. In order to tackle this issue, the present article also provides a comparison between the performance of two different BE formulations (conventional and hybrid). In addition, this paper presents an overview of the most common post-processing and visualization techniques in BE analysis, such as the classical algorithms of scan line and the interpolation over a domain discretization. The results presented herein show that the proposed algorithm offers a very high performance compared with other visualization procedures.     

Tree pattern mining with tree automata constraints

Most work on pattern mining focuses on simple data structures such as itemsets and sequences of itemsets. However, a lot of recent applications dealing with complex data like chemical compounds, protein structures, XML and Web log databases and social networks, require much more sophisticated data structures such as trees and graphs. In these contexts, interesting patterns involve not only frequent object values (labels) appearing in the graphs (or trees) but also frequent specific topologies found in these structures. Recently, several techniques for tree and graph mining have been proposed in the literature. In this paper, we focus on constraint-based tree pattern mining. We propose to use tree automata as a mechanism to specify user constraints over tree patterns. We present the algorithm CoBMiner which allows user constraints specified by a tree automata to be incorporated in the mining process. An extensive set of experiments executed over synthetic and real data (XML documents and Web usage logs) allows us to conclude that incorporating constraints during the mining process is far more effective than filtering the interesting patterns after the mining process.     

A methodology for the generation of planar models for multibody chain drives

To overcome the difficulty on building manually complex models of chain drives, this work proposes a comprehensive methodology to build multibody models of any general chain drive automatically from a minimal set of data. The proposed procedure also evaluates the initial positions and velocities of all components of the drive that are consistent with the kinematic joints or with the contact pairs used in the model. In this methodology, all links and sprockets are represented by rigid bodies connected to each other either by ideal or by clearance revolute joints. The clearance revolute joint contact is further extended to handle the contact between the chain rollers and the sprocket teeth exact profiles. A suitable cylindrical continuous contact law is applied to describe the interaction on all contact pairs. One of the complexities of the computational study of roller chain drives is the large number of bodies in the system and the dynamics of the successive engagement and disengagement of the rollers with the sprockets. Each time a roller engages or disengages with a sprocket tooth, the number of rigid bodies in contact changes. The search for the contact pairs is recognized as one of the most time consuming task in contact analysis. This work proposes a procedure to specify the contact pairs and their update during the dynamic analysis optimizing the computational efficiency of the contact search. The methodologies adopted result in a general computer program that is applied and demonstrated in a generic chain drive that can be used in industrial machines, vehicle engines or any other type of mechanical system.     

Transmission power and data rate aware routing on wireless networks

Wireless networks can vary both the transmission power and modulation of links. Existing routing protocols do not take transmission power control (TPC) and modulation adaptation (also known as rate adaptation – RA) into account at the same time, even though the performance of wireless networks can be significantly improved when routing algorithms use link characteristics to build their routes. This article proposes and evaluates extensions to routing protocols to cope with TPC and RA. The enhancements can be applied to any link state or distance vector routing protocols. An evaluation considering node density, node mobility and link error show that TPC- and RA-aware routing algorithms improve the average latency and the end-to-end throughput, while consuming less energy than traditional protocols.     

3D face computational photography using PCA spaces

In this paper, we present a 3D face photography system based on a facial expression training dataset, composed of both facial range images (3D geometry) and facial texture (2D photography). The proposed system allows one to obtain a 3D geometry representation of a given face provided as a 2D photography, which undergoes a series of transformations through the texture and geometry spaces estimated. In the training phase of the system, the facial landmarks are obtained by an active shape model (ASM) extracted from the 2D gray-level photography. Principal components analysis (PCA) is then used to represent the face dataset, thus defining an orthonormal basis of texture and another of geometry. In the reconstruction phase, an input is given by a face image to which the ASM is matched. The extracted facial landmarks and the face image are fed to the PCA basis transform, and a 3D version of the 2D input image is built. Experimental tests using a new dataset of 70 facial expressions belonging to ten subjects as training set show rapid reconstructed 3D faces which maintain spatial coherence similar to the human perception, thus corroborating the efficiency and the applicability of the proposed system.     

An haptic-based immersive environment for shape analysis and modelling

Currently, the design of aesthetic products is a process that requires a set of activities where digital models and physical mockups play a key role. Typically, these are modified (and built) several times before reaching the desired design, increasing the development time and, consequently, the final product cost. In this paper, we present an innovative design environment for computer-aided design (CAD) surface analysis. Our system relies on a direct visuo-haptic display system, which enables users to visualize models using a stereoscopic view, and allows the evaluation of sectional curves using touch. Profile curves are rendered using an haptic device that deforms a plastic strip, thanks to a set of actuators, to reproduce the curvature of the shape co-located with the virtual model. By touching the strip, users are able to evaluate shape characteristics, such as curvature or discontinuities (rendered using sound), and to assess the surface quality. We believe that future computer-aided systems (CAS)/CAD systems based on our approach will contribute in improving the design process at industrial level. Moreover, these will allow companies to reduce the product development time by reducing the number of physical mockups necessary for the product design evaluation and by increasing the quality of the final product, allowing a wider exploration and comparative evaluation of alternatives in the given time.     

A DSS for integrated distribution of empty and full containers

A DSS integrating empty and full containers transshipment operations is presented, addressing the typically unbalanced export/import containers trading problem. The problem is modeled as a network, where nodes represent customers, leasing companies, harbors and warehouses, while arcs represent transportation routes. The underlying mathematical model operates in stages, first prioritizing and adjusting full containers demands considering available empty containers supplies, and then statically optimizing costs. Transportation routes are registered and dynamically controlled, cyclically, for a given time horizon. The DSS is flexible, allowing several parameters to be configured. Experimental examples using randomly generated parameters were conducted to evaluate the effectiveness of the system.     

Constructive learning neural network applied to identification and control of a fuel-ethanol fermentation process

In the present work, a constructive learning algorithm was employed to design a near-optimal one-hidden layer neural network structure that best approximates the dynamic behavior of a bioprocess. The method determines not only a proper number of hidden neurons but also the particular shape of the activation function for each node. Here, the projection pursuit technique was applied in association with the optimization of the solvability condition, giving rise to a more efficient and accurate computational learning algorithm. As each activation function of a hidden neuron is defined according to the peculiarities of each approximation problem, better rates of convergence are achieved, guiding to parsimonious neural network architectures. The proposed constructive learning algorithm was successfully applied to identify a MIMO bioprocess, providing a multivariable model that was able to describe the complex process dynamics, even in long-range horizon predictions. The resulting identification model was considered as part of a model-based predictive control strategy, producing high-quality performance in closed-loop experiments.