Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Investigation of wetting behaviour of hardenable copper based-alloys for brazing applications

ABSTRACT

Tools for machining are exposed to high loads, wear, and elevated temperatures. Commonly, such tools consist of cemented carbides and tool steel. To combine the advantages of both materials, high-quality-joints with high strengths are desired. When brazing these materials, the main challenge is the mismatch of the Coefficient of Thermal Expansion (CTE) and the poor wettability of cemented carbides by molten filler alloys. In this regard, the feasibility of two custom-made alloys (CuNi12Si5, CuNi12Si5B0.4) was analysed. Besides being a cost-efficient alternative, these alloys offer the possibility to modify their mechanical properties by precipitation hardening to reduce stresses within the final joints. Thus, this paper shows that a temperature of 1060°C is suitable for wetting and brazing tests on different substrates.     

Extracellular Vesicles and Asthma—More Than Just a Co-Existence

Extracellular vesicles (EVs) are membranous structures, which are secreted by almost every cell type analyzed so far. In addition to their importance for cell-cell communication under physiological conditions, EVs are also released during pathogenesis and mechanistically contribute to this process. Here we summarize their functional relevance in asthma, one of the most common chronic non-communicable diseases. Asthma is a complex persistent inflammatory disorder of the airways characterized by reversible airflow obstruction and, from a long-term perspective, airway remodeling. Overall, mechanistic studies summarized here indicate the importance of different subtypes of EVs and their variable cargoes in the functioning of the pathways underlying asthma, and show some interesting potential for the development of future therapeutic interventions. Association studies in turn demonstrate a good diagnostic potential of EVs in asthma.     

Evaluation of Stable LifeAct-mRuby2- and LAMP1-NeonGreen Expressing A549 Cell Lines for Investigation of Aspergillus fumigatus Interaction with Pulmonary Cells

Inhaled Aspergillus fumigatus spores can be internalized by alveolar type II cells. Cell lines stably expressing fluorescently labeled components of endocytic pathway enable investigations of intracellular organization during conidia internalization and measurement of the process kinetics. The goal of this report was to evaluate the methodological appliance of cell lines for studying fungal conidia internalization. We have generated A549 cell lines stably expressing fluorescently labeled actin (LifeAct-mRuby2) and late endosomal protein (LAMP1-NeonGreen) following an evaluation of cell-pathogen interactions in live and fixed cells. Our data show that the LAMP1-NeonGreen cell line can be used to visualize conidia co-localization with LAMP1 in live and fixed cells. However, caution is necessary when using LifeAct-mRuby2-cell lines as it may affect the conidia internalization dynamics.     

On forecasting large and infrequent snow avalanches

Snow avalanches that threaten a highway or a residential area are often large avalanches that have a return period > 1 year. Danger assessment strongly relies on precipitation data since these avalanches are typically triggered by major snow storms. Given the extensive protection work that is in place in the European Alps, the avalanche control service (also called avalanche commission) responsible for danger assessment will usually monitor the avalanche situation throughout the winter, but only become active in case of a major snow fall. Related safety concepts describing the procedures and measures to be taken in a given danger situation are therefore often based on threshold values for new snow. By analysing the avalanche occurrence of a major avalanche path, we show that forecasting based on new snow amounts involves high uncertainty. Whereas the return period of an avalanche to, for example, the road was about 5 years, the return period for the corresponding new snow depth was substantially smaller, in our case slightly less than 2 years. Similar proportions were found for a number of other avalanche paths with different snow climate. The return period of the critical new snow depth was about 2–5 times smaller than the return period of the avalanche. This proportion is expected to increase with increasing return period. Hence, based on the return period of an avalanche path a first estimate for the critical new snow depth can be made. With a return period of the critical new snow depth of 1–2 years, avalanche prediction for individual avalanche path becomes very challenging since the false alarm ratio is expected to be high.     

Digital camera identification from sensor pattern noise

In this paper, we propose a new method for the problem of digital camera identification from its images based on the sensor's pattern noise. For each camera under investigation, we first determine its reference pattern noise, which serves as a unique identification fingerprint. This is achieved by averaging the noise obtained from multiple images using a denoising filter. To identify the camera from a given image, we consider the reference pattern noise as a spread-spectrum watermark, whose presence in the image is established by using a correlation detector. Experiments on approximately 320 images taken with nine consumer digital cameras are used to estimate false alarm rates and false rejection rates. Additionally, we study how the error rates change with common image processing, such as JPEG compression or gamma correction.     

Protactinium-231: A new radionuclide for AMS

For the first time, an AMS system was used to determine concentrations of the actinide Protactinium-231. ²³¹Pa has widespread applications in the earth sciences. It can be used for U-series disequilibrium dating, and ²³¹Pa is an important tracer in Paleoceanography. The Pa isotopes were measured with the compact ETH/PSI-AMS facility TANDY operating at about 300 kV. The linearity of the AMS is documented with two standard-dilution experiments and first measurements of natural samples from very different climate archives are presented. Our results show that it is possible to determine ²³¹Pa amounts in the lower femtogram (1 fg = 10⁻¹⁵ g) range with the TANDY. In natural samples, ²³¹Pa concentrations between 1 and 4 pg/g (1 pg = 10⁻¹² g) were measured with an average total error of 3% (one sigma). The average over all reproducibility of these first measurements was better than 2% with clear potential for improvement.     

A Novel Magnetic Hardening Mechanism for Nd-Fe-B Permanent Magnets Based on Solid-State Phase Transformation

Permanent magnets based on neodymium-iron-boron (Nd-Fe-B) alloys provide the highest performance and energy density, finding usage in many high-tech applications. Their magnetic performance relies on the intrinsic properties of the hard-magnetic Nd₂Fe₁₄B phase combined with control over the microstructure during production. In this study, a novel magnetic hardening mechanism is described in such materials based on a solid-state phase transformation. Using modified Nd-Fe-B alloys of the type Nd₁₆Fe_bal-x-y-zCo_xMo_yCu_zB₇ for the first time it is revealed how the microstructural transformation from the metastable Nd₂Fe₁₇B_x phase to the hard-magnetic Nd₂Fe₁₄B phase can be thermally controlled, leading to an astonishing increase in coercivity from ≈200 kAm⁻¹ to almost 700 kAm⁻¹. Furthermore, after thermally treating a quenched sample of Nd₁₆Fe₅₆Co₂₀Mo₂Cu₂B₇, the presence of Mo leads to the formation of fine FeMo₂B₂ precipitates, in the range from micrometers down to a few nanometers. These precipitates are responsible for the refinement of the Nd₂Fe₁₄B grains and so for the high coercivity. This mechanism can be incorporated into existing manufacturing processes and can prove to be applicable to novel fabrication routes for Nd-Fe-B magnets, such as additive manufacturing.     

On the necessity of explicit cross-layer data formats in near-data processing systems

Distributed and Parallel Databases - Massive data transfers in modern data-intensive systems resulting from low data-locality and data-to-code system design hurt their performance and scalability....