The design of an electron gun switchable between immersed and Brillouin flow

An electron gun, which can be switched from immersed flow to Brillouin flow during operation, may have advantages for charge breeders as well as for electron beam ion sources and traps (EBISTs). For EBISTs this allows to change the current density according to the repetition frequency and charge state, for charge breeders and EBISTs a lower current density in immersed flow provides higher acceptance for injected ions, while the higher current density in Brillouin flow results in shorter breeding times and a lower emittance for the extracted beam. Therefore, we have designed such a gun for an EBIS with 5 T central magnetic field and without the use of iron and moving the gun. The gun was placed in the axial fringing field of the 5 T solenoid in such a position that a gate valve can be placed between the gun and the cryostat to allow for simple maintenance. The field at the cathode surface turned out to be only 0.05 T, which is not enough to focus 50 A∕cm(2) at a few kV. However, if a small normal conducting solenoid is placed over the vacuum tube in position of the gun, a field of 0.1 T may be obtained. With this the use of LaB(6) as cathode material results in a magnetic compression of 44 and therewith in a focused current density in the trap region of more than 2000 A∕cm(2). By reversing the current in the gun solenoid the cathode field can easily compensated to zero. By proper design of the electrodes and the compression region, the gun will be able to deliver a beam in Brillouin flow. While this is interesting by itself--remember the "super-compression" reported on CRYEBIS-I--any magnetic field between zero and the value for immersed flow will result in an electron beam with a wide range of adjustable high current densities. The design tools used have been INTMAG(C) for the calculation of magnetic fields, EGN2(C) for the simulation of the gun and ANALYSE(C) for detailed analysis of the results (for more information see www.egun-igun.com).     

The spectrum study of blood pressure during the disturbance of organic vascular beds

Abstract

Like electrical circuit components, the vascular beds in organs present impedance to waves in systemic circulation. In this study, the authors design an animal experiment to study the effect of the impedance to the pressure waves. We view the systemic circulation as an electrical circuit network, and interpret the vascular beds in organs as lumped components in the electrical circuit. Nature's designing of the systemic circulation minimizes the pressure wave reflection, and maximizes blood distribution. This is very similar to the concept adopted by electrical engineers in designing electrical circuits.     

Hydrogel/bioactive glass composites for bone regeneration applications: Synthesis and characterisation

Due to the deficiencies of current commercially available biological bone grafts, alternative bone graft substitutes have come to the forefront of tissue engineering in recent times. The main challenge for scientists in manufacturing bone graft substitutes is to obtain a scaffold that has sufficient mechanical strength and bioactive properties to promote formation of new tissue. The ability to synthesise hydrogel based composite scaffolds using photopolymerisation has been demonstrated in this study. The prepared hydrogel based composites were characterised using techniques including Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy-dispersive X-ray spectrometry (EDX), rheological studies and compression testing. In addition, gel fraction, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), porosity and swelling studies of the composites were carried out. It was found that these novel hydrogel bioglass composite formulations did not display the inherent brittleness that is typically associated with bioactive glass based bone graft materials and exhibited enhanced biomechanical properties compared to the polyethylene glycol hydrogel scaffolds along. Together, the combination of enhanced mechanical properties and the deposition of apatite on the surface of these hydrogel based composites make them an ideal candidate as bone graft substitutes in cancellous bone defects or low load bearing applications.     

Hydrothermal Carbonization of Biomass: Major Organic Components of the Aqueous Phase

Process waters obtained from hydrothermal carbonization (HTC) of wheat straw, a biogas digestate derived thereof, and four woody biomass feedstocks were quantified regarding the total organic carbon (TOC) and selected organic compounds. HTC runs revealed that TOC loads were largely unaffected by process severity or type of feedstock whereas the C₂–C₆ fatty acids, determined by GC, displayed clear effects of temperature and feedstock. HPLC demonstrated simultaneously the initial increase and subsequent consumption of cellulose‐derived furfural and 5‐hydroxymethylfurfural as well as the increase of the lignin‐derived 2‐methoxyphenol. 2‐Methylbenzofuran, an example for a substance potentially harmful to aquatic biota, was observed in high concentration in the HTC liquor from wheat straw‐based feedstocks.     

Pulsatile Jet Cleaning of Filter Cloths Contaminated with Yeast Cells

The cleaning of filter cloths is necessary to avoid prolonged system downtime and strong fouling. Reliable cleaning concepts are central to the removal of residues from the complex surface of filter cloths. Particle residues, in particular, play a decisive role in the sufficiency of the cleaning performance. Consequently, enhanced particle‐removal cleaning concepts based on pulsatile jets for filter cloths have been developed. By varying the cleaning parameters, it has been demonstrated that increased pulse numbers and velocities improve the cleaning performance. Furthermore, this promising cleaning concept cleaned more effectively than conventional methods. The reduction in the amount of detergent needed is an ecological and economic advantage of pulsatile cleaning.     

A comparison of two sampling methods for global sensitivity analysis

We compare the convergence properties of two different quasi-random sampling designs – Sobol?s quasi-Monte Carlo, and Latin supercube sampling in variance-based global sensitivity analysis. We use the non-monotonic V-function of Sobol? as base case-study, and compare the performance of both sampling strategies at increasing sample size and dimensionality against analytical values. The results indicate that in almost all cases investigated here, the Sobol? design performs better. This, coupled with the fact that effective Latin supercube sampling requires a priori knowledge of the interaction properties of the function, leads us to recommend Sobol? sampling in most practical cases.     

Environmental and individual exposure to secondhand aerosol of electronic cigarettes in confined spaces: Results from the TackSHS Project†

Secondhand electronic cigarette (e-cigarette) aerosol (SHA) might impair indoor air quality and expose bystanders. This study aims to investigate exposure to SHA in controlled conditions of enclosed settings simulating real-world scenario. An experiment was performed in a car and in a room, in which SHA was generated during a 30-minute ad libitum use of an e-cigarette. The experiment was replicated on five consecutive days in each setting. We measured PM_2.5, airborne nicotine concentrations, and biomarkers of exposure to SHA, such as nicotine metabolites, tobacco-specific nitrosamines, propylene glycol, and glycerol in bystanders’ saliva samples before, during, and after the exposure period. Self-reported health symptoms related to exposure to SHA were also recorded. The results showed that the highest median PM_2.5 concentration was recorded during the exposure period, being 21 µg/m³ in the room setting and 16 µg/m³ in the car setting—about twofold increase compared to the baseline. Most concentrations of the airborne nicotine and all biomarkers were below the limit of quantification in both settings. Bystanders in both settings experienced some short-term irritation symptoms, expressed as dry throat, nose, eyes, and phlegm. In conclusion, short-term use of an e-cigarette in confined spaces increased indoor PM_2.5 level and caused some irritation symptoms in bystanders.     

Thermal Boundary Resistance in GaN Films Measured by Time Domain Thermoreflectance with Robust Monte Carlo Uncertainty Estimation

In this work, we investigate the thermal boundary resistance and thermal conductivity of GaN layers grown on Si with 100 nm AlN transition layers using time domain thermoreflectance (TDTR). The GaN layers ranged from 0.31 to 1.27 μm. Due to the challenges in determining the thermal boundary resistance of the buried interfaces found in this architecture, a new data reduction scheme for TDTR that utilizes a Monte Carlo fitting method is introduced and found to dramatically reduce the uncertainty in certain model parameters. The results show that the GaN thermal conductivity does not change significantly with layer thickness, whereas the resistance of the AlN layer decreases slightly with GaN thickness.