Data validation platform for the sophisticated monitoring and communication of the energy technology sector

It has very often been stated that the difficulty and complexity of achieving green energy targets in the European Union (EU) will require strengthened measures to promote implementation of New Energy Technologies, Energy End-use Efficiency, as well as measures to support the related energy Research and Technology Development (RTD). Often forgotten is the fact, that most of all, a European-wide co-ordinated forum is needed to continuously develop and sophisticate the monitoring and methodology results, bringing together specialised statisticians, energy researchers and experts on energy socio-economics. The aim of this paper is to present the Scientific Reference System (SRS) Scorecard; a data validation platform for the sophisticated monitoring and communication of the energy technology sector. In this respect, the concept of the SRS scorecard system will be laid out, the parameters and the scoring criteria will be explained as well as the assessment system so as to provide the interested reader with the basis needed to understand the technology evaluation examples provided, as well as its critical analysis.     

Current scenario and potential of biodiesel production from waste cooking oil in Pakistan: An overview

Biodiesel utilization has been rapidly growing worldwide as the prime alternative to petrodiesel due to a global rise in diesel fuel demand along with hazardous emissions during its thermochemical conversion. Although, several debatable issues including feedstock availability and price, fuel and food competition, changes in land use and greenhouse gas emission have been raised by using edible as well as inedible feedstocks for the production of biodiesel. However, non-crop feedstocks could be a promising alternative. In this article, waste cooking oils have been recommended as a suitable option for biodiesel production bearing in mind the current national situation. The important factors such as the quantity of waste cooking oil produced, crude oil and vegetable oil import expenses, high-speed diesel imports, waste management issues and environmental hazards are considered. Moreover, process simulation and operating cost evaluation of an acid catalyzed biodiesel production unit are also conducted. The simulation results show that the production cost of waste cooking oil-based biodiesel is about 0.66USD·L^-1. We believe that the present overview would open new pathways and ideas for the development of biofuels from waste to energy approach in Pakistan.     

A solar and wind driven energy system for hydrogen and urea production with CO2 capturing

A novel solar PV and wind energy based system is proposed in this study for capturing carbon dioxide as well as producing hydrogen, urea and power. Both Aspen Plus and EES software packages are employed for analyses and simulations. The present system is designed in a way that PEM electrolyzer is powered by the wind turbines for hydrogen production, which is further converted into ammonia and then synthesizes urea by capturing CO₂ and additional power is supplied to the community. The solar PV is employed to power the cryogenic air separation unit and the additional power is used for the industrial purpose. In the proposed system, ammonia does not only capture CO₂ but also synthesizes urea for fertilizer industry. The amount of electrical power produced by the system is 2.14 MW. The designed system produces 518.4 kmol/d of hydrogen and synthesizes 86.4 kmol/d of urea. Furthermore, several parametric studies are employed to investigate the system performance.     

Sustainable Green Fog Computing for Smart Agriculture

Wireless Personal Communications - Medical Body Area Networks or MBANs are gaining popularity in healthcare circles because of the convenience they provide to patients and caregivers and assist in...     

Enhancing robustness and perturbation tolerance of cognitive radio engines with metacognition

A cognitive radio engine (CE) is an intelligent agent which observes the radio environment and chooses the best communication settings that best meet the application’s goal. In this process, providing reliable performance is one of the major tasks in designing CEs for wireless communication systems. The main purpose of this work is providing predictable performance and controlling the cost of intelligent algorithms based on the CE’s experience and complexity analysis respectively. In this work, we extend our meta-CE design to control the cost of computations and provide more reliable performance for providing the minimum requirement of the radio applications in different scenarios. To achieve this, we use robust training algorithm (RoTA) in two different levels alongside of the individual CE algorithms. The RoTA, enables radio to guarantee some minimum output performance based on the learning stages. RoTA uses confidence interval approximation for standard normal distribution to calculate the lower and upper bounds of CE’s expected performance to analyze the reliability of decisions. Moreover, in the case of non-stationary environments, RoTA is facilitated by forgetfulness factor to provide minimum performance guarantees. The second level of RoTA operates in meta-level to control the amount of computation complexity of intelligent algorithms in all levels with respect to the obtained performance and complexity analysis.     

Intelligent building energy management system using rule sets

The current study presents an intelligent decision support model using rule sets based on a typical building energy management system. In addition, the model's impact on the energy consumption and indoor quality of a typical office building in Greece is presented. The model can control how the building operational data deviates from the settings as well as carry out diagnosis of internal conditions and optimize building's energy operation. In this context, the integrated “decision support model” can contribute to the management of the daily energy operations of a typical building, related to the energy consumption, by incorporating the following requirements in the best possible way: (a) the guarantee of the desirable levels of living quality in all building's rooms and (b) the necessity for energy savings.     

Scanning electrochemical microscopy. 57. SECM tip voltammetry at different substrate potentials under quasi-steady-state and steady-state conditions

We discuss SECM tip voltammetry, where a UME tip is held above a conductive substrate within about a tip radius and a tip voltammogram is recorded as its potential is slowly scanned while the substrate is held at a fixed potential. When the potential of the substrate is changed, the series of steady-state tip voltammograms provide information about the reactants and products. When the potential of the substrate, ES, is set so that the reaction at the substrate is opposite to that at the tip (the usual SECM conditions), a total positive feedback (tpf) tip voltammogram is recorded. When the substrate potential is set to values where the reaction at the substrate is the same as that occurring on the tip, the tip is shielded from the species in the bulk solution. Depending upon the substrate potential, this can cause total shielding (ts) or a voltammogram that is the result of partial feedback/partial shielding (pf-ps). The result is a series of tip voltammograms that are characterized by tpf, pf-ps, or ts, depending upon ES. Experimental tip voltammograms resulting from the reversible reduction of TCNQ and oxidation of ferrocene in MeCN are reported. These are compared with those from simulations and approximate equations developed to describe the features of the tip voltammograms generated under tpf, ts, or pf-ps conditions. The effect of the diffusion coefficient ratio on the ability of the UME tip to reach a true steady state is also addressed and possible applications, e.g., obtaining information about the reversibility of an electrochemical reaction, the product of an electrochemical reaction, the stability of that product, or the diffusion coefficients of the electroactive species, are discussed.     

Optimization of Composite Material System and Lay-up to Achieve Minimum Weight Pressure Vessel

The use of composite pressure vessels particularly in the aerospace industry is escalating rapidly because of their superiority in directional strength and colossal weight advantage. The present work elucidates the procedure to optimize the lay-up for composite pressure vessel using finite element analysis and calculate the relative weight saving compared with the reference metallic pressure vessel. The determination of proper fiber orientation and laminate thickness is very important to decrease manufacturing difficulties and increase structural efficiency. In the present work different lay-up sequences for laminates including, cross-ply [0 _m /90 _n ] _s , angle-ply [±θ] _ns , [90/±θ] _ns and [0/±θ] _ns , are analyzed. The lay-up sequence, orientation and laminate thickness (number of layers) are optimized for three candidate composite materials S-glass/epoxy, Kevlar/epoxy and Carbon/epoxy. Finite element analysis of composite pressure vessel is performed by using commercial finite element code ANSYS and utilizing the capabilities of ANSYS Parametric Design Language and Design Optimization module to automate the process of optimization. For verification, a code is developed in MATLAB based on classical lamination theory; incorporating Tsai–Wu failure criterion for first-ply failure (FPF). The results of the MATLAB code shows its effectiveness in theoretical prediction of first-ply failure strengths of laminated composite pressure vessels and close agreement with the FEA results. The optimization results shows that for all the composite material systems considered, the angle-ply [±θ] _ns is the optimum lay-up. For given fixed ply thickness the total thickness of laminate is obtained resulting in factor of safety slightly higher than two. Both Carbon/epoxy and Kevlar/Epoxy resulted in approximately same laminate thickness and considerable percentage of weight saving, but S-glass/epoxy resulted in weight increment.