Nanoparticle evolution in flame spray pyrolysis—Process design via experimental and computational analysis

In flame spray pyrolysis (FSP), the evolution of metal oxide nanoparticles relies on quite a number of droplet (liquid) and vapor phase related physical mechanism as for instance precursor evaporation, oxidation, nucleation via gas-to-particle conversion mechanism, and subsequent particle (solid) growth mechanisms based on coagulation, sintering/coalescence, and agglomeration. The liquid precursor and dispersion oxygen feed rates are relevant control parameters of the FSP process for tailoring the nanoparticle size (diameter) and structure as well as the atomizer nozzle configuration. Sophisticated nonintrusive, laser-based in situ and ex situ diagnostics with multiscale spatial resolution (micrometer to meter range) are applied for analyzing droplet formation and size, gas velocity, temperature, species concentration, as well as primary and agglomerate diameters along the flow direction. Computational fluid dynamics (CFD) are coupled with population balance modeling (PBM) to elucidate the nanoparticle dynamics within the reactive spray. It is found that the CFD-PBM approach allows estimations of primary and agglomerate nanoparticle diameters within 80 and 75% accuracy compared to experimental data, suggesting that the methods presented could pave the way for designing next-generations of flame reactors.     

The Deubiquitinase OTUB1 Is a Key Regulator of Energy Metabolism

Dysregulated energy metabolism is a major contributor to a multitude of pathologies, including obesity and diabetes. Understanding the regulation of metabolic homeostasis is of utmost importance for the identification of therapeutic targets for the treatment of metabolically driven diseases. We previously identified the deubiquitinase OTUB1 as substrate for the cellular oxygen sensor factor-inhibiting HIF (FIH) with regulatory effects on cellular energy metabolism, but the physiological relevance of OTUB1 is unclear. Here, we report that the induced global deletion of OTUB1 in adult mice (Otub1 iKO) elevated energy expenditure, reduced age-dependent body weight gain, facilitated blood glucose clearance and lowered basal plasma insulin levels. The respiratory exchange ratio was maintained, indicating an unaltered nutrient oxidation. In addition, Otub1 deletion in cells enhanced AKT activity, leading to a larger cell size, higher ATP levels and reduced AMPK phosphorylation. AKT is an integral part of insulin-mediated signaling and Otub1 iKO mice presented with increased AKT phosphorylation following acute insulin administration combined with insulin hypersensitivity. We conclude that OTUB1 is an important regulator of metabolic homeostasis.     

Carborane-Containing Matrix Metalloprotease (MMP) Ligands as Candidates for Boron Neutron-Capture Therapy (BNCT)

Based on the previously reported potent and selective sulfone hydroxamate inhibitors SC-76276, SC-78080 (SD-2590), and SC-77964, potent MMP inhibitors have been designed and synthesized to append a boron-rich carborane cluster by employing click chemistry to target tumor cells that are known to upregulate gelatinases. Docking against MMP-2 suggests binding involving the hydroxamate zinc-binding group, key H-bonds by the sulfone moiety with the peptide backbone residues Leu82 and Leu83, and a hydrophobic interaction with the deep P1’ pocket. The more potent of the two triazole regioisomers exhibits an IC₅₀ of 3.7 nM versus MMP-2 and IC₅₀ of 46 nM versus MMP-9.     

Occurrence of perfluoroalkyl compounds in surface waters from the North Pacific to the Arctic Ocean

Perfluoroalkyl compounds (PFCs) were determined in 22 surface water samples (39-76°N) and three sea ice core and snow samples (77-87°N) collected from North Pacific to the Arctic Ocean during the fourth Chinese Arctic Expedition in 2010. Geographically, the average concentration of ∑PFC in surface water samples were 560 ± 170 pg L(-1) for the Northwest Pacific Ocean, 500 ± 170 pg L(-1) for the Arctic Ocean, and 340 ± 130 pg L(-1) for the Bering Sea, respectively. The perfluoroalkyl carboxylates (PFCAs) were the dominant PFC class in the water samples, however, the spatial pattern of PFCs varied. The C(5), C(7) and C(8) PFCAs (i.e., perfluoropentanoate (PFPA), perfluoroheptanoate (PFHpA), and perfluorooctanoate (PFOA)) were the dominant PFCs in the Northwest Pacific Ocean while in the Bering Sea the PFPA dominated. The changing in the pattern and concentrations in Pacific Ocean indicate that the PFCs in surface water were influenced by sources from the East-Asian (such as Japan and China) and North American coast, and dilution effect during their transport to the Arctic. The presence of PFCs in the snow and ice core samples indicates an atmospheric deposition of PFCs in the Arctic. The elevated PFC concentration in the Arctic Ocean shows that the ice melting had an impact on the PFC levels and distribution. In addition, the C(4) and C(5) PFCAs (i.e., perfluorobutanoate (PFBA), PFPA) became the dominant PFCs in the Arctic Ocean indicating that PFBA is a marker for sea ice melting as the source of exposure.     

Synthesis and isolation of <Emphasis Type="Italic">trans</Emphasis>-7, <Emphasis Type="Italic">cis</Emphasis>-9 octadecadienoic acid and other CLA isomers by base conjugation of partially hydrogenated γ-linolenic acid

CLA is of considerable interest because of reported potentially beneficial effects in animal studies. CLA, while not yet unambiguously defined, is a mixture of octadecadienoic acids with conjugated double bonds. The major isomer in natural products is generally considered to be cis-9,trans-11-octadecadienoic acid (c9, t11), which represents >75% of the total CLA in most cases. Other isomers are drawing increased attention. The t7,c9 isomer, which is often the second-most prevalent CLA in natural products, has been reported to represent as much as 40% of total CLA in milk from cows fed a high-fat diet. The need for a reference material became apparent in a recent study directed specifically at measuring t7,c9-CLA in milk, plasma, and rumen. A suitable standard mixture was produced by stirring 0.5 g of γ-linolenic acid (all cis-6,9, 12-C_18∶3) with 100 mL of 10% hydrazine hydrate in methanol for 2.5 h at 45°C. The solution was diluted with H₂O and acidified with HCl. The resulting partially hydrogenated FA were extracted with ether/petroleum ether, dried with Na₂SO₄, and conjugated by adding of 6.6% KOH in ethlylene glycol and heating for 1.5 h at 150–160°C. Approximately 20 mg each of cis-6, trans-8; trans-7, cis-9; cis-9, trans-11; and rans-10, cis-12 were obtained along with other FA. Methyl esters (FAME) of these four cis/trans isomers were resolved by Ag⁺HPLC (UV 233) and partially resolved by GC/(MS or FID) (CP-Sil 88). Treatment of these FAME with I₂ yielded all possible cis/trans (geometric) isomers for the four positions 6,8; 7,9; 9,11; and 10,12.     

Spectral characterization of periglacial surfaces and geomorphological units in the Arctic Lena Delta using field spectrometry and remote sensing

Important environmental parameters in arctic periglacial landscapes (i.e. permafrost temperature, active-layer depth, soil moisture, precipitation, vegetation cover) will very likely change in a warming climate. The thawing of permafrost, especially, might cause massive landscape changes due to thermokarst and an enhanced release of greenhouse gasses from the large amounts of carbon stored in frozen deposits, resulting in positive climate-warming feedback. For the identification, mapping, and quantification of such changes on various scales up to the entire circum-Arctic, remote sensing and spatial data analysis are essential tools. In this study an extensive field-work dataset including spectral surface properties, vegetation, soils, and geomorphology was acquired in the largest Arctic delta formed by a single river, the Siberian Lena River Delta. A portable field spectrometer (ASD FieldSpec Pro FR®) was used for spectral surveys of terrain surfaces, and optical satellite data (Landsat Enhanced Thematic Mapper (ETM+), CHRIS-Proba) were used for the characterization, manual mapping, and automatic classification of typical periglacial land-cover units in the Lena Delta. Qualitative data from soils, vegetation, soil moisture, and relief units were correlated with the field-spectral data and catalogued for a wide variety of surface types. The wide range of micro- and meso-scale variations of periglacial surface features in the delta results in distinctive spectral characteristics for different land-cover units. The three main delta terraces could also be spectrally separated and characterized. The present dataset provides a basis for further spectral data acquisitions in the Lena Delta and for comparisons with periglacial surfaces from other regions.     

Development, fabrication, and test of a modular eddy current micro sensor on a flexible polymer foil

This paper describes the development and fabrication of a modular eddy current micro sensor on a flexible polymer foil. Due to handling purposes during the micro sensor fabrication process the modular eddy current micro sensors are fabricated on a temporary Si substrate. To enable a release of the micro sensors at the end of the fabrication process, initial investigations concentrated on the proof of principle applying a deep reactive-ion etching (DRIE) process to structure the Si wafer. The DRIE process was used to structure Si frames, which serve as carriers for the modular micro sensors. For the evaluation of the fabricated eddy current micro sensors, electrical resistance measurements were accomplished with the integrated anisotropic magneto-resistance (AMR) sensor. The aim of these investigations was to evaluate the influence of the substrate material on the characteristics of the AMR sensor. The electrical output signal of these micro sensors were subsequently compared to electrical resistance measurements of identical AMR sensors fabricated on a Si substrate and served as reference. To prove the capability of the completed eddy current micro sensors, a defect in form of a scratch was created on the surface of a Cu probe and investigated by eddy current testing. The electrical output signal of the eddy current micro sensor was subsequently compared to an optical measurement of the surface profile of this scratch. There is a high correlation between the optical measurements and the signal of the eddy current micro sensor.     

Production of Polyunsaturated Fatty Acids by Mortierella alpina Using Submerse and Solid State Fermentation

A new isolate of Mortierella alpina, &#62; 98 % identical with M. alpina ATCC 16266, was cultivated in a defined glucose‐based medium with three organic nitrogen sources (glycine, urea and Na‐L‐glutamate) at three different concentrations in shaking flasks at 20 °C. The results were compared to the cultivation in complex medium with yeast extract as nitrogen source. In the defined media, high yields of polyunsaturated fatty acids (PUFAs) and arachidonic acid (ARA), respectively, were obtained with Na‐L‐glutamate. However, the absolute highest yields of PUFA and ARA were measured with the yeast extract medium. An optimized yeast extract complex medium was used for a submerse bioreactor cultivation in a 45‐L scale. Furthermore, M. alpina was cultivated in a solid state fermenter, using an oat bran water mixture as substrate.     

Application of the Electrodiffusion Method to Measure Wall Shear Stress: Integrating Theory and Practice

The electrodiffusion method has been used in fluid dynamic research for the past 50 years. It allows the measurement of wall shear stress, a crucial parameter, e.g., for the cleaning of membrane modules used in water filtration. Various authors have published articles dealing with the theory behind this technique. But no paper collects all the knowledge assembled over five decades of application. Here, comprehensive summary of the theory of steady flow, unsteady flow, and transient voltage step experiments is given. Factors influencing the accuracy of the measurements are discussed. Furthermore, a new approach to calibrate the system from voltage step experiments is introduced, and practical issues related to its application in flow measurements are discussed for an exemplary signal response to a near‐wall flow.     

Computability and Complexity in Self-assembly

This paper explores the impact of geometry on computability and complexity in Winfree’s model of nanoscale self-assembly. We work in the two-dimensional tile assembly model, i.e., in the discrete Euclidean plane ℤ×ℤ. Our first main theorem says that there is a roughly quadratic function f such that a set A⊆ℤ⁺ is computably enumerable if and only if the set X _A ={(f(n),0)∣n∈A}—a simple representation of A as a set of points on the x-axis—self-assembles in Winfree’s sense. In contrast, our second main theorem says that there are decidable sets D⊆ℤ×ℤ that do not self-assemble in Winfree’s sense.