Study of thermal and acoustic noise interferences in low stiffness atomic force microscope cantilevers and characterization of their dynamic properties

The atomic force microscope (AFM) is a powerful tool for the measurement of forces at the micro/nano scale when calibrated cantilevers are used. Besides many existing calibration techniques, the thermal calibration is one of the simplest and fastest methods for the dynamic characterization of an AFM cantilever. This method is efficient provided that the Brownian motion (thermal noise) is the most important source of excitation during the calibration process. Otherwise, the value of spring constant is underestimated. This paper investigates noise interference ranges in low stiffness AFM cantilevers taking into account thermal fluctuations and acoustic pressures as two main sources of noise. As a result, a preliminary knowledge about the conditions in which thermal fluctuations and acoustic pressures have closely the same effect on the AFM cantilever (noise interference) is provided with both theoretical and experimental arguments. Consequently, beyond the noise interference range, commercial low stiffness AFM cantilevers are calibrated in two ways: using the thermal noise (in a wide temperature range) and acoustic pressures generated by a loudspeaker. We then demonstrate that acoustic noises can also be used for an efficient characterization and calibration of low stiffness AFM cantilevers. The accuracy of the acoustic characterization is evaluated by comparison with results from the thermal calibration.     

Epilactose production by 2 cellobiose 2-epimerases in natural milk

It was reported recently that cellobiose 2-epimerases (CE) from various aerobic microorganisms convert lactose to epilactose in defined buffer systems. In this study, we showed that CE from 2 mesophilic microorganisms, Flavobacterium johnsoniae and Pedobacter heparinus, were capable of converting lactose to prebiotic epilactose not only in buffer but also in a complex milk system. First, the 2 enzymes were separately cloned, recombinantly expressed in Escherichia coli, and purified by column chromatography. The production of F. johnsoniae CE was carried out in a stirred-tank reactor, indicating that future upscaling is possible. The bioconversions of milk lactose were carried out at an industrially relevant low temperature of 8°C to avoid undesired microbial contaminations or chemical side reactions. Both enzymes were reasonably active at this low temperature, because of their origin from mesophilic organisms. The enzymes showed different operational stabilities over a 24-h time-course. A conversion yield of about 30 to 33% epilactose was achieved with both enzymes. No side products were detected other than epilactose. Therefore, CE may introduce an added value for particular dairy products by in situ production of the prebiotic sugar epilactose.     

Mitotic Diversity in Homeostatic Human Interfollicular Epidermis

Despite decades of skin research, regulation of proliferation and homeostasis in human epidermis is still insufficiently understood. To address the role of mitoses in tissue regulation, we utilized human long-term skin equivalents and systematically assessed mitoses during early epidermal development and long-term epidermal regeneration. We now demonstrate four different orientations: (1) horizontal, i.e., parallel to the basement membrane (BM) and suggestive of symmetric divisions; (2) oblique with an angle of 45°–70°; or (3) perpendicular, suggestive of asymmetric division. In addition, we demonstrate a fourth substantial fraction of suprabasal mitoses, many of which are committed to differentiation (Keratin K10-positive). As verified also for normal human skin, this spatial mitotic organization is part of the regulatory program of human epidermal tissue homeostasis. As a potential marker for asymmetric division, we investigated for Numb and found that it was evenly spread in almost all undifferentiated keratinocytes, but indeed asymmetrically distributed in some mitoses and particularly frequent under differentiation-repressing low-calcium conditions. Numb deletion (stable knockdown by CRISPR/Cas9), however, did not affect proliferation, neither in a three-day follow up study by life cell imaging nor during a 14-day culture period, suggesting that Numb is not essential for the general control of keratinocyte division.     

Oxygen permeation of various archetypes of oxygen membranes based on BSCF

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3‐δ tubes, capillaries, capillary modules, and asymmetric membranes were prepared and tested for oxygen permeation in a dead‐end vacuum operation mode at temperatures up to 850^°C. The capillary module was built up by reactive air brazing using seven capillaries and a supply tube. Two machined discs were used as an end cap and as a connector plate. The oxygen permeation behaves according to Wagner at small driving forces, but significant negative deviations were observed for asymmetric membranes and single capillaries at higher ones. This is caused by pressure drops at the vacuum side for single capillaries. The highest oxygen flux was revealed for the capillary module with 175.5 mL(STP)/min at a low‐vacuum pressure of 0.042 bar at 850^°C, but the asymmetric membrane showing a little bit higher flux at moderate vacuum pressures above 0.07 bar. © 2012 American Institute of Chemical Engineers AIChE J, 58: 3195–3202, 2012     

Arduino-based slider setup for gas–liquid mass transfer investigations: Experiments and CFD simulations

The implementation of traditional sensors is a drawback when investigating mass transfer phenomena within microstructured devices, since they disturb the flow and reactor characteristics. An Arduino based slider setup is developed, which is equipped with a computer-vision system to track gas–liquid slug flow. This setup is combined with an optical analytical method allowing to compare experimental results against CFD simulations and investigate the entire lifetime of a single liquid slug with high spatial and temporal resolution. Volumetric mass transfer coefficients are measured and compared with data from literature and the mass transfer contribution of the liquid film is discussed.     

Absorption of acrylates and polysilazanes in the far UVC and the VUV regions

A simple but reliable method was developed for the determination of wavelength-dependent absorption coefficients in the vacuum-UV (VUV) spectral range 160 nm < λ < 195 nm.     

Some aspects on ruggedness of SiC power devices

This article is on effects that can destroy SiC power semiconductor devices. The failure physics in SiC devices are discussed based on the well understood effects in silicon devices. In some device properties, such as surge current, short circuit, static avalanche and dynamic avalanche, SiC has significant possible advantages compared to silicon. For cosmic ray stability, there are no unique results. Regarding thermal mechanical stress on interface materials, SiC is more challenging. The same may hold for electrical stress in passivation layers at the junction termination.     

Field classification of publications in Dimensions: a first case study testing its reliability and validity

Dimensions is a research data infrastructure and tool, including grants, publications, citations, clinical trials, and patents in one place. An interesting feature of Dimensions is its field classification scheme, which is not based on journal classification systems, as in the Web of Science or Scopus, but on machine learning. Each publication is assigned to at least one field. Using the set of my own publications, I investigated whether they were reliably and validly assigned to fields. The results put in question the reliability and validity of the scheme. Large scale studies seem necessary to investigate the scheme in more detail.