Biodegradation of monoaromatic hydrocarbons in aquifer columns amended with hydrogen peroxide and nitrate

The ability of indigenous microorganisms to degrade benzene, toluene, ethylbenzene and xylenes (BTEX) in laboratory scale flow-through aquifer columns was tested separately with hydrogen peroxide (110 mg/l) and nitrate (330 mg/l as NO₃⁻) amendments to air-saturated influent nutrient solution. The continuous removal of individual components from all columns relative to the sterile controls provided evidence for biodegradation. In the presence of hydrogen peroxide, the indigeneous microorganisms degraded benzene and toluene (> 95%), meta- plus para-xylene (80%) and ortho-xylene (70%). Nitrate addition resulted in 90% removal of toluene and 25% removal of ortho-xylene. However, benzene, ethylbenzene, meta- and para-xylene concentrations were not significantly reduced after 42 days of operation. Following this experiment, low dissolved oxygen (< 1 mg/l) conditions were initiated with the nitrate-amended column influent in order to mimic contaminated groundwater conditions distal from a nutrient injection well. Toluene continued to be effectively degraded (> 90%), and more than 25% of the benzene, 40% of the ethylbenzene, 50% of the meta- plus para-xylenes and 60% of the ortho-xylene were removed after several months of operation.     

Modeling and analysis of vias in multilayered integrated circuits

A method for modeling and analyzing vias the multilayered integrated circuits is presented. The model is based on microwave network theory. The whole via structure is divided into cascaded subnetworks, including a vertical via passing through different layers and transitions from the microstrip line and/or striplines to the vertical via. The parameters of each subnetwork are obtained from electromagnetic field analysis. Numerical results in the frequency domain and the time domain are presented. Validation of the model has been carried out by both measurements and finite-difference-time-domain (FDTD) modeling. The results show good agreement with the measurements in the frequency range for which the components of the experimental model are within specification. The time domain simulation results also agree well with the FDTD results     

Comment and discussion on digital processing of PD pulses

Some of the more salient aspects of the digital processing technology of PD signals are examined. Most of the efforts in this field are concentrated on the application of digital analyzers for pulse height analysis, pattern recognition and identification of the physical phenomena. It is demonstrated that errors in the signal processing unit can lead to dominant mistakes in the interpretation of the test results     

A comparison of two conformal methods for FDTD modeling

Two conformal finite-difference time-domain (FDTD) methods are considered, the contour path (CPFDTD) method of Jurgens et al. (see IEEE Trans. Antennas Propagat., vol.40, p.357, 1992) and the overlapping grid (OGFDTD) method of Yee et al. (see IEEE Trans. Antennas Propagat., vol.40, p.1068, 1992). Both TE and TM scattering from a two-dimensional (2-D), perfectly conducting circular cylinder are used to test the accuracy of the methods for curved surfaces. Also, TE and TM scattering from a 2-D, perfectly-conducting rotated square cylinder are used to test the accuracy for corners and edges. It is shown that the conformal method proposed by Yee et al. provide significant improvement in accuracy over the original FDTD algorithm for most of the geometries studied. However, implementation becomes more difficult as the geometries become more complex. The conformal method proposed by Jurgens et al. provide significant improvement in accuracy as well for most of the geometries studied. However, improvement does not occur for the TM case when the square cylinder is not aligned properly with the grid. Implementation of the CPFDTD method is relatively straightforward. For the majority of the cases studied, the OGFDTD method is more accurate than the CPFDTD method     

Sequence capture-PCR improves detection of mycobacterial DNA in clinical specimens

The rapid identification of mycobacterial DNA in clinical samples by PCR can be useful in the diagnosis of tuberculous infections, but several large studies have found that the sensitivity of this approach is not better than that of culture. In order to improve the sensitivity of detection of mycobacterial DNA in clinical specimens from patients with paucibacillary forms of tuberculosis, we have developed a procedure permitting the specific capture of mycobacterial DNA in crude samples prior to amplification, thereby concentrating the target sequences and removing irrelevant DNA and other potential inhibitors of the amplification reaction (sequence capture-PCR). By using this approach to capture and amplify two different sequences specific for organisms of the Mycobacterium tuberculosis complex (IS6110 and the direct repeat region), it was possible to detect as little as one genome of mycobacterial DNA in samples containing up to 750 micrograms of total DNA, representing a 10- to 100-fold increase in sensitivity compared with that obtained by purifying total DNA prior to amplification. Detection of the IS6110 sequence in pleural fluid samples from patients with tuberculous pleurisy by sequence capture-PCR gave positive results in 13 of 17 cases, including 3 of 3 culture-positive samples and 10 of 14 culture-negative samples. In contrast, when total DNA was purified from these samples by adsorption to a silica matrix prior to amplification, only the three culture-positive samples were positive by PCR. The sensitivity of detection of the direct repeat sequence in these samples by sequence capture-PCR was similar to that of IS6110 and, in addition, permitted immediate typing of the strains from some patients. We conclude that sequence capture-PCR improves the sensitivity of detection of mycobacterial DNA in paucibacillary samples. This approach should be useful in detecting rare target sequences from organisms implicated in other pathologic processes.     

Direct and indirect assessment of skeletal muscle blood flow in patients with congestive heart failure

Techniques which are currently used to measure skeletal muscle blood flow (SMBF) in patients with congestive heart failure (CHF) are neither convenient nor accurate. They have led to discrepant results in patients with congestive heart failure and are, in part, responsible for the ongoing debate regarding the factors which limit the rise in body oxygen consumption during exercise in these patients. However, direct measurement of SMBF may not be needed during exercise in patients with severe CHF. Their skeletal muscles maximally extract oxygen. Consequently, increase in oxygen consumption by the skeletal muscles is only mediated by a concomitant increase in SMBF. In patients with severe CHF, peak body oxygen consumption attained during maximal exercise closely depends on the rise in SMBF, and thus provides an indirect measurement of SMBF.     

The effects of the pretreatment of intravenous high dose methylprednisolone on Na(+)-K(+)/Mg(+2) ATPase and lipid peroxidation and early ultrastructural findings following middle cerebral artery occlusion in the rat

The sodium-potassium activated and magnesium dependent adenosine-5'-triphosphatase (Na(+)-K(+)/Mg(+2) ATPase EC.3.6.1.3.) activity and lipid peroxidation and early ultrastructural findings were determined in rat brain at the acute stage of ischaemia produced by permanent unilateral occlusion of the middle cerebral artery (MCA). The effects of the pretreatment with intravenous high-dose methylprednisolone (MP) on these biochemical indices and ultrastructural findings were also evaluated in the same model. The rats were divided into four groups. In group I, 10 rats were used to determine Na(+)-K(+)/Mg(+2) ATPase activity and the extent of lipid peroxidation by measuring the malondialdehyde (MDA) content and normal ultrastructural findings. In group II on 20 rats, only subtemporal craniectomy was done in order to determine the effects of the surgical procedure on these indices and findings. This group was treated intravenously with saline solution before occlusion. In group III with MCA occlusion, saline solution was administered intravenously to 20 rats in the same amount of methylprednisolone used in group IV, ten minutes before the occlusion. In Group IV, a single high-dose (30 mg/kg) of methylprednisolone was administered intravenously, ten minutes before occlusion in 20 rats. After occlusion of the middle cerebral artery, Na(+)-K(+)/Mg(+2) ATPase activity was decreased promptly in the first ten minutes in the ischaemic hemisphere and remained at a lower level than the contralateral hemispheres in the same group and the normal levels in group I, during 120 minutes of ischaemia. A single dose methylprednisolone pretreatment prohibited the inactivation of Na(+)-K(+)/Mg(+2) ATPase. On the other hand, there was significant difference in malondialdehyde content between group I and group III. Malondialdehyde levels were significantly increased following ischaemia and a non-significant increase was observed in the contralateral hemisphere. Methylprednisolone treatment significantly decreased malondialdehyde content on the side of the ischaemic hemisphere. We conclude that there is a positive relationship between membrane-bound enzyme Na(+)-K(+)/Mg(+2) ATPase activity, malondialdehyde content and early ultrastructural changes in the treated group with MP. These data suggest that the pretreatment injection of high doses (30 mg/kg) methylprednisolone contribute to the protection of the brain from ischaemia with stabilization of the cell membrane by effecting the lipid peroxidation and the activation of Na(+)-K(+)/Mg(+2) ATPase.     

New concept for applying edge line phase-shifting masks to arbitrary mask layouts

This paper explains the principle of a method which avoids printing of phantom resist lines due to undesired intensity minima appearing on Cr-less edge line phase-shifting masks. The method combines principles of grey-tone lithography and attenuated phase-shifting masks to give, what we call, a Cr-Less Attenuated Phase-shifting mask (CLAP). Rules for generating a CLAP design and a paradigm setup of a CLAP mask are presented. The capabilities and possible limitations of the CLAP method based on simulated results for a standard wafer stepper setup using the SOLID lithography simulator are being assessed.