Determination of flexibility of beam-to-column connectors used in thin walled cold-formed steel pallet racking systems

This paper describes a new test to determine flexibility of beam-to-column connectors used in conventional pallet racking systems. In this study, two different ways were used to find the flexibility of a connector. The connector developed was tested using the conventional cantilever method [Bajoria, KM. Three dimensional progressive collapse of warehouse racking, PhD Thesis, University of Cambridge, UK 1986], and then also using a newly proposed double cantilever method. To verify the results obtained from both the tests, a full scale frame test was carried out. In the double cantilever test the connector is subjected to three types of forces namely moment, shear and the axial pull by the beams, thereby giving behavior close to practical usage of connectors. Non-linear finite element analysis of both the tests and also of the full scale test were carried out using ANSYS [ANSYS 7.0—User's Manual, ANSYS Inc., 2005] software. The results obtained from the double cantilever test were found to match well with the full scale frame test. The experimental results and the finite element results are compared in this paper.     

Reviews

DROUGHT AND FAMINE IN ETHIOPIA Editor: Abdul Mejid Hussein. African Environment Special Report No. 2, The International African Institute, London, 1976,121 pp. £1.50.

HEDGING (A Practical conservation handbook) Alan Brooks, The British Trust for Conservation Volunteers, The Zoological Gardens, Regents Park, London, 1975. 117 pp. £2.10 inc. postage.

THREE JOURNALS Habitat: Published by : The Council for Nature, The Zoological Gardens, Regents Park, NW1 4RY. At £2.50, or £5.00 per annum.

Recreation News: Published by: The Countryside Commission , John Dower House, Crescent Place, Cheltenham, Glos., GL50 3RA.

The International Journal of Environmental Studies: Published by : Gordon Breach Science Publishers Ltd., 42 William IV Street. London, W.C.2. £17.50 for individuals, £35.00 for Libraries. Habitat

A HISTORY OF LANCASHIRE J.J. Bagley, Phillimore & Co. Ltd., London & Chichester 1976. 128 pp. £4.95.     

Improvement in accuracy of the finite element method in analysis of stability of Euler–Bernoulli and Timoshenko beams

The problem of buckling of the Euler–Bernoulli and Timoshenko beams is analyzed by the finite element method. Significant improvement in accuracy of the method is obtained by replacing the discontinuous function of the bending moment related to the approximation of the eigenfunction obtained by FEM by a “smoothed” function in the Rayleigh quotient. The smoothed function is obtained by fitting the discontinuous one using the least square technique.     

Lead in glasgow street dirt and soul

The levels of lead in city street dirt and in soil from various locations in Glasgow were investigated during spring 1976. Lead concentrations in street dirt ranged from 150–2300 ppm, mean 960 ppm, and were significantly elevated with respect to the observed “natural” level of 78 ppm. Lead derived from anti-knock compounds in petrol and introduced to the environment via automobile exhausts was clearly implicated as the main source of lead pollution in a series of soil lead measurements at the centre and periphery of eight Glasgow parks.Various chemical leaching techniques were employed and compared. Less than 5% of street dirt and soil lead was found to be associated with the organic phase.     

Case study of an underground shopping mall in Japan: the east side of Yokohama station

In Japan, development of underground shopping malls beneath the street is controlled by many laws and regulations. Nonetheless, demands for such development nowadays are increasing in densely populated cities because of the advantages, both in terms of economics and the public interest. This case history deals with the construction process and precautionary measures taken against potential disasters in the development of the east side of Yokohama Station.     

Assessment of nitrification in groundwater filters for drinking water production by qPCR and activity measurement

In groundwater treatment for drinking water production, the causes of nitrification problems and the effectiveness of process optimization in rapid sand filters are often not clear. To assess both issues, the performance of a full-scale groundwater filter with nitrification problems and another filter with complete nitrification and pretreatment by subsurface aeration was monitored over nine months. Quantitative real-time polymerase chain reaction (qPCR) targeting the amoA gene of bacteria and archaea and activity measurements of ammonia oxidation were used to regularly evaluate water and filter sand samples. Results demonstrated that subsurface aeration stimulated the growth of ammonia-oxidizing prokaryotes (AOP) in the aquifer. Cell balances, using qPCR counts of AOP for each filter, showed that the inoculated AOP numbers from the aquifer were marginal compared with AOP numbers detected in the filter. Excessive washout of AOP was not observed and did not cause the nitrification problems. Ammonia-oxidizing archaea grew in both filters, but only in low numbers compared to bacteria. The cell-specific nitrification rate in the sand and backwash water samples was high for the subsurface aerated filter, but systematically much lower for the filter with nitrification problems. From this, we conclude that incomplete nitrification was caused by nutrient limitation.     

Spatial and temporal evolution of trihalomethanes in three water distribution systems

Spatial and seasonal changes in trihalomethane (THM) concentrations were investigated in three distribution systems of Quebec (Canada) which are supplied by different surface waters and which use a variety of physicochemical treatment strategies. The investigation was based on an intensive 25-week sampling programme, undertaken at a time of year when the temperature of southern Quebec surface waters exceeds 4 degrees C (April-November). THMs and other water quality and operational parameters were monitored at points along the distribution system--between the treatment plant and the system extremities--which represented variable residence times of water. Results showed that THM concentrations vary significantly (from 1.5 to 2 times, depending on the utility) between finished waters as they leave the plant and water at the system extremities. When water temperature exceeds 15 degrees C, spatial THM variations are particularly high (from 2 to 4 times, depending on the utility). The development of multivariate regression models showed that water temperature was a better predictor of THM seasonal variability than chlorine dose, surrogates of natural organic matter and pH. Also, initial THM formation (in finished waters leaving the plant) was a good predictor of THM levels at distribution system extremities.     

The relative influence of wind,sunlight and temperature on user comfort in urban outdoor spaces

This paper presents the development of a comfort index that measures adaptivity in outdoor spaces. Over a 9-month period 649 people were surveyed in three locations, in temperatures between 10 and 28 °C. An exploratory factor analysis develops a 15-item scale of comfort that includes measures of adaptivity: clothing, exposure time and seating location. The scale is regressed on physical measures: average instantaneous wind speed; maximum wind speed; mean-exposed radiant temperature; mean-shaded radiant temperature and ambient temperature. The results model the relative contributions of the microclimatic factors for the comfort in the outdoor space. Analyses suggest gustiness and wind speed are most important in determining user satisfaction. There is strong support for the theory that people actively adapt to microclimatic conditions.     

Terrain analysis for development studies: Typical mountainous area along the Eastern Mediterranean coast-lebanon

The limited areal extent of small countries means that reliance has to be placed on mountainous terrain in developing more land needed for continuous growth. These terrains, especially along the Eastern Mediterranean, usually have rugged morphologies which makes their evaluation difficult. The Australian P.U.C.E. system for terrain assessment and classification proved to be an optimal approach for engineering-geology related studies for the above task in the Aley-Chouf area. Basic land properties having an impact on land development are singled out. They constitute mainly the geological formations, relief, drainage, land forms, soils and the vegetation cover. The land divisions used are Province, Pattern and Unit which cover ten rock formations of varying lithologies, water character and stability features. The area is divided into 7 provinces, 26 terrain patterns and 152 units. These land divisions imply finding similar engineering geological problems and applying similar solutions when planning to develop the area, or some other equivalent areas.