Temperature and Frequency Dependence of the Ultrasound Velocity in Neutron-Irradiated Quartz Crystals Above 5 K

Neutron-irradiated quartz crystal is one of the interesting materials for the study of the glassy dynamics. The temperature and frequency dependence of the sound velocity in amorphous materials at temperatures above the low-temperature maximum is not well understood. In this paper we present the results of our measurements of the variation of the ultrasound velocity (270 – 650 MHz) in neutron-irradiated quartz crystals with different irradiation doses in temperature range 5 - 35 K. We have found that the temperature dependence of the ultrasound velocity is linear in the sample with a dose < 10 ¹⁹ n/cm² and is sublinear in samples with a dose > 10 ¹⁹ n/cm² . We discuss our results in the framework of the different theoretical approaches. PACS numbers: 61.43. j, 62.65.+k, 63.     

Influence of the shape of fiber cross section on fabric surface characteristics

Fiber cross sections for use in textiles and composites are becoming more and more complex. Shape impacts fiber or filaments properties and therefore the yarn and fabric characteristics. This paper presents the influence of the fiber cross section on the fabric surface characteristics. The material used was polyester staple fibers, of four different shapes: round, scalloped oval, cruciform and hexachannel. All fibers had the same cut length with different fineness. Yarns obtained from these fibers had nominally the same yarn count, torsion value and structure. Plain jersey fabrics were knitted from each of the yarns under identical conditions and then relaxed prior to testing. Friction behavior was evaluated and a roughness-friction criterion developed. An indirect measurement of the real area of contact was obtained in order to provide roughness and friction properties. The influence of fiber cross section on yarn bending rigidity and on the state of the knitted fabric surface was characterized.     

The wear behaviour of oxide ceramics-A Review

The paper reviews the wear behaviour of oxide ceramics. Wear maps are considered and consequently mild and severe wear are defined. Since the use of ceramics in engineering applications require operation in the mild wear regime, the paper concentrates on mild wear mechanisms, but also considers factors which control the transition to severe wear. Within the mild wear regime, the formation of tribofilms are discussed and the manner in which dislocation activity leads to the wear transition is considered. The wear of so-called ceramic nanocomposites, for which no time dependent wear transition has yet been observed, is considered and the reasons for enhanced performance discussed. The role of transformation toughening in zirconia ceramics is considered in detail, and reasons for the generally poor wear response of these materials defined.     

Wave dynamics on a thin-liquid film falling down a heated wall

The dynamics of a thin liquid film falling down a uniformly heated wall is studied. The model introduced by Kalliadasis et al. [J. Fluid Mech. 475 (2003) 377] for the same problem is revisited and its deficiencies, namely the prediction of a critical Reynolds number with 20% error, cured. For the energy equation a high-order Galerkin projection in terms of polynomial test functions is developed. It is shown that not only does this more refined formulation correct the critical Reynolds number, but it also gives, with an appropriate expansion close to criticality, the long-wave theory. Bifurcation diagrams for permanent solitary waves are constructed and compared with the solution branches obtained from different models. It is shown that, in all cases, the long-wave theory exhibits limit points and branch multiplicity, while the other models predict the continuing existence of solitary waves. Time-dependent computations show that the free surface and interfacial temperature approach a train of coherent structures that resemble the infinite-domain stationary solitary pulses.     

Textural Transitions in a Rotating Slab of 3He-A

The operation of a torsional oscillator for detection, of flow-driven textural transitions in, ³He-A is described. The detection technique, tracking the shift of the resonant frequency of the torsional oscillator, allows us to observe textural changes and the presence of vortices in zero magnetic field. It relies on. the anisotropic superfluid density of ³He-A and its change due to reorientation of the Î-texture caused by counterflow.     

Methodologies for the optimal design of parallel manipulators

In this paper the problem of determining a manipulator design so that its workspace corresponds to a prescribed workspace is considered. Two different strategies, resulting in two different types of optimization problem are considered. The first strategy attempts to obtain a good overall approximation to the prescribed workspace and results in an unconstrained optimization problem. The second strategy entails designing a manipulator so that its workspace fully encloses the prescribed workspace and results in a constrained optimization problem. Two specific formulations of the constrained problem are proposed. The first constrained problem simply aims to fit the manipulator workspace as exactly as possible to the prescribed workspace, while still ensuring that the prescribed workspace is fully enclosed. The second constrained optimization formulation is used to design a manipulator, the workspace of which fully encloses the prescribed workspace, but which is also well‐conditioned throughout the workspace with respect to some performance measure. The particular manipulator used to illustrate and evaluate these formulations is a simple 2‐dof planar parallel manipulator, and the final formulation is also applied to a 3‐dof planar parallel manipulator. Although the manipulators studied here are simple, the objective of this study is to obtain a robust numerical methodology which can be extended to more practical and complex manipulators. Copyright © 2003 John Wiley & Sons, Ltd.     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.