Computerized facility layout design

The paper describes a computerized facility layout designer, COMLAD II, for plant layout development. Besides developing an efficient layout, COMLAD II has useful features which allow fixing the departments, changing the shape of the departments and changing the length and width dimensions of the overall layout.     

IBM RISC System/6000: architecture and performance

The IBM RISC System/6000, a superscalar microprocessor, is presented. The architecture of this processor has its instruction set specifically designed for a superscalar machine containing three independent units-branch, fixed-point, and floating-point. The design also emphasizes high-performance floating-point operations. The design principles are to offer maximum overlap of the three functional units, avoid dead cycles, and define instructions that can (for the most part) be completed at a rate of one per cycle. The branch cycle, fixed- and floating-point units, cache management, and performance are described. Benchmark results are given     

Thermal analysis of the architecture of old and new houses at Ghadames

The study suggests improvements in the design of new houses to conserve energy and enhance indoor thermal comfort. Summer temperature records show that a new house has an average indoor temperature of 35°C with the ambient average 31°C. The traditional house in the old city recorded 28°C for the same period. Winter temperatures in both types of houses were similar (12°C) when not occupied. Architectural features of the two houses were compared to identify those responsible for difference in the thermal performance. Larger exposed surface and window areas, higher overall heat transfer coefficient and weaker thermal coupling with the ground for the new houses seems to contribute to their inferior thermal performance.     

The glass fibre-polymer interface: II—Work of fracture and shear stresses

Pull-out experiments have been carried out on single production fibres under carefully controlled conditions. Four parameters were determined. The interfacial yield stresses, of about 9–14 MPa, were very much smaller than the shear strengths of the bulk polymers in the case of an epoxy, whether post-cured or not, and a non-post-cured polyester. Values for the work of fracture of the interface varied from 140 to 300 Jm^?2, and again were less than those of the polymer. Interface failure sometimes took place in the epoxy rather than at the fibre surface, whereas with the polyester it always took place at the fibre surface. After interface failure, pull-out was governed by friction, with maximum shear stresses of 7–10 MPa for polyester, and 21–34 MPa for epoxy, the higher values being obtained for the post-cured resins. Average frictional shear stresses were sometimes less than a half of the maximum shear stress, indicating that the fibre Poisson's shrinkage was playing an important role in the pull-out process. A silicone release agent reduced the frictional shear stresses to 2·5 MPa, with both resins.     

Elastic effects in the flow of polymer solutions in channels of variable cross section and a porous medium

The manifestation of elastic effects during the filtration of polymer solutions is analyzed theoretically.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 49, No. 3, pp. 390–397, September, 1985.     

Polynomial-complexity deadlock avoidance policies for sequentialresource allocation systems

The development of efficient deadlock avoidance policies (DAPs) for sequential resource allocation systems (RASs) is a problem of increasing interest in the scientific community, largely because of its relevance to the design of large-scale flexibly automated manufacturing systems. Much of the work on this problem existing in the literature is focused on the so-called single-unit RAS model, which is the simplest model in the considered class of RASs. Furthermore, due to a well-established result stating that, even for single-unit RASs, the computation of the maximally permissive DAP is intractable (NP-hard), many researchers (including our group) have focused on obtaining good suboptimal policies which are computationally tractable (scalable) and provably correct. In the first part of the paper, it is shown, however, that for a large subset (in fact, a majority) of single-unit RASs, the optimal DAP can be obtained in real-time with a computational cost which is a polynomial function of the system size (i.e., the number of resource types and the distinct route stages of the processes running through the system). The implications of this result for the entire class of single-unit RASs are also explored. With a result on the design of optimal DAPs for single-unit RASs, the second part of the paper concentrates on the development of scalable and provably correct DAPs for the more general case of conjunctive RASs